Just received iPad2 and don't understand setting up WiFi and Cellular connections. When I turn it on it shows some bars and AT
When I turn iPad2 on it shows some bars and AT&T in the top upper left corner of screen. Does this mean I am connected to AT&T cellular service? I have not signed up for AT&T service yet. I have a Wifi connection at home and have been trying to connect to it, but I am not sure I have been successful since AT&T is howing in the left side of screen. If I ap Settings, Wi-FI the screen shows my home wifi connection with a check mark beside it. Is Wi-Fi connected? If not, how do I connect. When I first tried, after tap on my home Wi-Fi identity I got another screen asking for details on the connection that I didn't have any idea of. When I went to the game center I was asked for password for Wi-Fi which I entered, but Wi-Fi identity never showed up anywhere in the top of the screen. So, I don't know what type of connection I have going and it appears that the AT&T connection is always on. That'snot what I want. I would mostly use Wi-Fi and only AT7T when away from home base.
Appreciate any help and sorry for such a basic question. this is my first Apple device.
What you might find useful is the user guide, the address of which was on the card that was in the iPad's box:
http://manuals.info.apple.com/en_US/ipad_2_user_guide.pdf
Similar Messages
-
my macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing
Gray, Blue or White screen at boot, w/spinner/progress bar
-
Hello! I bought sony tablet. when I turns it on it shows sign "sony" and that's it than black sreen.
Hello! I bought sony tablet. when I turns it on it shows sign "sony" and that's it than black sreen. can anyone help me with it?
Hi nutochka,
Try these troubleshooting steps.
IMPORTANT:Before starting this procedure, make sure the AC adapter is connected to the tablet charge connector and is plugged into a working wall outlet.
NOTE: Because each of these steps represents a possible solution to this issue, check the tablet status after completing each step.
Press and hold the power button for at least thirty seconds.
NOTE: If the tablet turns off, press the power button again to turn the tablet back on. If the tablet turns on, you should be able to use it normally. If it does not turn on, proceed to the next step.
If tablet is still frozen or not responding, you will need to follow these steps to initiate a forced External Data Reset procedure.
IMPORTANT: Unfortunately, because it is being reset to the condition it was in when it was first purchased, all of the data and settings will be erased from the tablet.
With the tablet completely off, press and hold the Volume Up (+) button, and while continuing to hold that button, press and hold the Power button for several seconds.
Once the Sony logo appears, let go of the Power button.
Continue to hold the Volume Up (+) button until the Android system recovery screen is displayed. Once that screen is displayed, release the Volume Up (+) button.
IMPORTANT: Sometimes starting to the Android system recovery screen is enough to return the tablet to normal condition, and a forced External Data Reset procedure may not be needed. For this reason we recommend that you quickly press the Power button in order to cancel the reset and restart the tablet. If the tablet turns on and you are able to use it normally, no further action is necessary. If the tablet still does not operate normally, repeat steps 1-3 above and then proceed with the next step.
In the Android system recovery screen, use the Volume Down (-) button to highlight the Reset to factory settings option.
Quickly press the Power button.
In the Reset to factory settings: Confirm reset screen, use the Volume Down (-) button to highlight the Yes -- delete all user data option.
Quickly press the Power button.
The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required.
If my post answers your question, please mark it as an “Accepted Solution”. -
I just got a nano 7th generation but came in chinese language and don't understand
Hi
I new at this, I just got the nano 7th generation. Took it out of the package and discover that is in chinese language and don't understand and don't know which one of the setting in the one for changing the language.
Can anyone help one
AnnieHey there amontalvo,
It sounds like your default language needs to be changed on your iPod Nano 7th gen. These instructions should help you get that reset, from the following article:
iPod: Changing the display language
http://support.apple.com/kb/HT1824
Reset your iPod—Depending on how much you've used your iPod since selecting the language, simply resetting your iPod may cause it to forget the current language setting, enabling you to select a new one. See How to reset iPod for instructions.
Note: When you reset your iPod, all your music and data files are saved, though you may need to reset some customized settings.
Update your iPod software—If you haven't updated your iPod software recently, use the latest version of iTunes and update the iPod software.
Go to the main menu—Disconnect your iPod from your computer, then press the Menu button until the menu title says "iPod," regardless of the language displayed. This means you are at the main menu.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I don't understand why I can't download for free the apps designed by Apple, such as Pages and Numbers, which are free with iOS 7. Can anyone help me?
The apps are free with iOS 7 if you purchased a new device after September 2013. The apps do not come free just because you are running iOS 7 now. Did you purchase or receive a new iPad recently?
If you did, are you using the same Apple ID to get the apps that you used to activate the iPad? If you are, sign out of your ID, restart your iPad, sign in again and go back to the App Syore and see if the apps show up as free.
Settings>iTunes & App Store>tap your ID and sign out. Restart the iPad and go back to the settings and sign in again. -
I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!
You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
Make sure show edit overlays is turned on in the Canvas view popup. -
i have just synced my iphone to my computer and all of my contacts went onto the computer and off my phone !! i have a mac .when i sync contacts i click on all contacts and only seven are going onto the phone !! can someone please give me an awnser
When you connect the iPhone to sync with the new computer, a number of things will happen. If the new computer/iTunes does not contain any music, then yes, you will receive a prompt saying this iPhone is synced to another library, and if you continue, you will lose your music. However, you risk losing a number of other things, such as apps, contacts and calendar data. When you ask about photos, any photos that you have on the iPhone that were synced from the previous computer would also be lost. You need to save the photo folder from the old laptop and transfer that to the new desktop. You also need to sync the contacts and calendar to the same supported application that you were using in the past, such as Outlook, unless you are using an outside web-based sync, such as Google. Also, when you first connect the iPhone, it will make a backup, or at least make sure that it does before you attempt to sync, or you will not have a backup of some of the other things, such as mail settings, SMS, and the contents of the Camera Roll. I would import the photos from the camera roll to the new computer before trying to do anything else in iTunes.
-
I've upgraded my pc and now Im getting an error message when Im trying to sync my ipod saying I have two itunes libraries. The library thats there is only showing some songs and it's not uploading songs Ive just bought.
You seem to have tried everything, and you say it's syncing fine on your Dad's iMac, so I assume, you have also done a Disk Diagnostic from an earlier post by tt2 and conclude that your iPod Hardisk is good.
You don't have to use it as a heavy paperweight, the problem is only using your Windows 7 machine for syncing.
In your troubleshooting steps, did you try to use another High-Speed USB 2.0 port, USB controller resource are very scarce, so if you use other USB devices, while syncing your iPod, it may just freeze.
Windows have a bad reputation for device conflict, so better don't connect other USB devices, while syncing, better sync it while disconnected from Internet, stop antivirus just before you go to bed.
Have a nice day! -
i am trying to set up icloud on my iphone when i go to settings icloud it says verifying and a box pops up for me to sign in with my apple id but that has my old apple id on it. help??
Have you already verified your "new" email address? If not then please check your inbox for a confirmation email (also the junk folder). If you do not have a confirmation email then please sign in at https://appleid.apple.com and press "verify" for confirming your email address.
-
I recently made a purchase within a game and I have no received my item that I bought yet. After I bought this item iTunes sent me a receipt showing me where and what I bought! I still have yet to get this item! What do I do?
Hi
Welcome to Apple Support Communities,
You can redownload some in-app purchases, see the article below for more info. And, if you aren't able to redownload the in-app purchase, you can always find a link to the application developers support in the App Store.
iTunes Store: About In-App Purchases
http://support.apple.com/kb/ht4009
Redownload an In-App Purchase
If you lose your In-App Purchases because apps were accidentally deleted or you had to restore your device without a backup, you may be able to download some of your purchases again for free. See which types of In-App Purchases you need to purchase again or can redownload for free in the table:
Type
Download for free
Purchase Again
Consumable
X
Non-consumable
X
Non-renewing subscriptions
X
Auto-renewable subscriptions
X
To download an In-App Purchase again, you must download it from within the installed app using the same iTunes Store account name you used for the original In-App Purchase.
-Jason -
My iphone 4 Carrier signal is very weak just shows one bar and often shows No Service followed by searching and again one signal bar I have had a lot of drop calls, I have tested the sim card on my Samsung Ace which shows full Signal strength I am on the latest iphone firmware 5.1.1 with 4.12.01 baseband I have tried resetting the iphone did o full restore twice. I guess there is something wrong with the iphone hardware? Has anyone had similar issues and how they fixed it?
Take the device to Apple or an Apple authorized service center and let them check it out.
-
I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only to wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?
Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods -
HT4623 My iPhone 4S does not show ringer bar and i now need to use ear phones to listen to music
My iphone 4s is not showing ringer bar and i cant listen to music without earphones
Hey chirambab,
Thanks for the question. I understand you are experiencing issues with your iPhone 4s in regards to audio.
The following resource may provide a solution:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
1. Verify that the volume is set to a level you would normally be able to hear.
2. Ensure that there is nothing plugged in to the headset jack or the dock connector.
3. If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
4. Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
5. If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
6. If the iPhone is paired with a Bluetooth headset or car kit:
- Try turning off Bluetooth.
- If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
7. Restart the iPhone.
8. If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
9. If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
If the issue persists, please follow the last step by contacting Apple Support for support and service options.
Thanks,
Matt M. -
Spy menu only showing some items and properties not available
I am having some issues with the spy menu. In order to try and fix my issues I built the menu from scratch again on one of my pages. Everything works now on that page and when I upload it to the server, it is all there.
However, when I then copy and paste the menu to all the other pages and upload the the server, the submenu doen't show anymore. When I go and troubleshoot it and highlight the menu in its entirety and click properties, no properties will show. On the working page, this ation delievers me a properties bar where I can + or - menu items. Why is this? As this must be why the submenu is not showing either?
The page where everything works is this (See sub menu under coaching clinics) http://www.golifecoaching.com.au/go-beyond-registration-test but on every other page on this website, this submenu disappears.
Can anyone help? I am tearing my hair out and don't fancy having to build the menu from scratch for every page. There has to be a better way.
I use CS4 and this is my menu;
<div id="navigation">
<!--MENU-->
<ul id="MenuBar2" class="MenuBarHorizontal">
<li><a href="index.html">Home</a> </li>
<li><a href="what-is-coaching.html">What is Coaching</a></li>
<li><a href="coaching-benefits.html">Coaching Benefits</a> </li>
<li><a href="do-you-need-a-life-coach.html">Do You Need a Life Coach</a></li>
<li><a href="about-go-life-coaching.html">About Go Life Coaching</a></li>
<li><a href="#" class="MenuBarItemSubmenu">Coaching Clinics</a>
<ul>
<li><a href="holdsworth.html">Coaching for Carers</a></li>
<li><a href="coachingclinic.html">The Coaching Clinic</a></li>
</ul>
</li>
<li><a href="contact-us.html">Contact Us</a></li>
<li><a href="http://www.golifecoaching.com.au/blog">Blog</a></li>
</ul>
<!--END MENU-->
JenThat is brilliant, that is exactly it! Thank you sooooo much for your suggestion. I am so relieved.
Yes a template would be best, but I am not sure how to do that, so I am left with doubling my work evertime I make a change on this site.
Thanks Jen
Date: Sat, 13 Aug 2011 16:43:59 -0600
From: [email protected]
To: [email protected]
Subject: Spy menu only showing some items and properties not available
Disclaimer: I am new to coding in general and this is my first attempt to help someone.
I think the properties bar with the + - has to do with the javascript coding that is generated when you create a new tag, and it is located near the bottom of the page just before the closing body tag.
looks something like this:
<script type="text/javascript">
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", );
</script>
so dont forget to copy that over too. Also, check the CSS that is associated within each page and make sure they are all in the same style.
P.S. Have you considered using a template for the menu bar so you dont have to copy it over each time?
> -
Mail app not showing some png and pdf attachments.
I'm using the iPhone 4s and recently, both mobileme and yahoo email accounts are not showing some png and pdf attachments. I'm seeing the attachment is there, but it doesn't load. Load remote images is turned on in settings. Does anyone have the same problem and a solution/explanation?
My work email account is an IMAP account.
I removed my work email account on my home computer this morning to test out this problem on my computer at work. I just sent a test message to my work account from my iPhone. My iPhone, iPad and computer at work still have my work email active on them and all the devices are showing the test message as new and unread. The problem seems to be that when I have my work email activated on my home computer, the messages do not show new and unread on the rest of my devices.
Maybe you are looking for
-
My pages are missing in design view ?? but not in live view?
I am using win 7 & DW5. I have not used DW% for more than a week. I need to update today and there is no page to work with? I don't know what to do? [email protected]
-
I have two iMac's one running 10.6.8 and the other 10.8.2 What Apeture program should I purchase?
I have two iMac's one running 10.6.8 and the other 10.8.2 What Apeture program should I purchase?
-
Organize by Conversation in Mail 6.0 not Working??
Ever since installing Mtn Lion I have noticed a real problem using Mail 6.0 in that 'organize by conversation' seems broken compared to the last version of Apple Mail. Is it just me or have others noted the same problem? What I am now seeing is multi
-
Problem adding grid items in code
Hi All I've got a problem creating a grid dynamically in code. The Grid and the rows are created without a problem and I can reference them, but when I try to add a gridItem I get a 1009 error. any ideas? for (var j:int = 1; j <= mCols; ++j) // add
-
Hi Experts, We recently made a client copy of our production system to our quality system. In our production client all our values in the transactions display correctly, but in our quality client the values are not being displayed correctly. I checke