Just reinstall my itunes and downloaded itunes 10.6. My itunes message is itune library.itl is created by a newer version, so I cannot open my itune
.
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash
Similar Messages
-
how do i revert back to older version of itunes 10.7 because I hate 11.i have unistalled all apple and itunes related software but 10.7 wont open.I is held up because the itunes library .itl was created by a newer version how do i delete this without itunes 11 installed ? Windows 7 64bit.
Thanks, just had the same problem. Not very computer savvy, but I could actually understand your instructions. Worked perfectly! Thanks again!
-
I just reinstalled iTunes, and it will not open, as it says iTunes library itl. was created from an earlier version. Any idea what this means, and how I can get itunes to open?
Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??
hello!
i have a similiar problem:
i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
thanks, florian -
Help.. My husband has been adding music to itunes and I did a system reboot on the computer to a previous date. Now I get an error message that says the itunes file can't be read cause it was created in a newer verison... WHAT DO I DO
hello!
i have a similiar problem:
i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
thanks, florian -
iTunes won't open because iTunes library.itl was created by a newer version of iTunes. How can I convert my library to an older version?
Thanks, just had the same problem. Not very computer savvy, but I could actually understand your instructions. Worked perfectly! Thanks again!
-
I have tried to download an older version but it will not run because the Itunes Library File was created by a newer version of iTunes. I have uninstalled the newer version but still can't run the older version. Caln anyone help me with this?
Stop trying to use an old version of iTunes.
Install the latest version from http://www.apple.com/itunes/download -
Just downloaded Itunes 10.6 on windows7 64bit and now cannot open Itunes get error msg:ITunes Library.itl cannot be read because it was created by a newer version of iTunes.Tried uninstall and reinstall any help ? Thanks
Even I am facing a similar problem. Initially the iTunes worked on my windows 64bit edition. Ever since I downloaded the latest version it has stopped identifying my 4S with an error msg that asks me to download the 64bit edition. I have tried it again and again but it did not help. After unistalling and downloading again the new error msg says " the file- iTuneslibrary.itl cannot be read because it was created by a newer version of iTunes". Please help!!!!!!!
-
iTunes installation problem. Please help. ituneslibary.itel cannot be read because it was created by a newer version of iTunes. Just downloaded iTunes what new version are they talking about? Thanks
See Empty/corrupt iTunes library after upgrade/crash and Troubleshooting issues with iTunes for Windows updates.
tt2 -
i am running vista home premium on desktop and vista basic on laptop. have placed my itunes music with .itl and .xml files onto external drive connected to another desktop running vista and can no longer access music on first two mentioned comps only on the one connected to external drive. always am told that the library cant be read because it was created using a newer version of itunes. have tried to download 10.3 but it always tells me that i have and invalid hard drive j and to try again. any ideas?
Older versions of iTunes cannot read libraries created with newer versions of iTunes. You need to have the same version of iTunes on all your PCs. Is that the case?
As far as the problem installing iTunes goes, see this article from b noir on dealing with the problem:
https://discussions.apple.com/thread/2450004
If you get to the point where you need the Microsoft Installer cleanup utility, you will need more help as it has been withdrawn by Microsoft. but I am hoping the virtual drive trick will work, -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.I did everything it said to do inarticle HT1923 Removing and reinstalling iTunes, Quick Time, and other sofware components for Windows Vista or Windows 7. Now what?
Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2 -
Hi all, please help me reinstall Itunes onto my PC. When i did a pc refresh, it deleted my itunes and microsoft office. I am now trying to reinstall itunes and am getting the following message each time i try run the new downloaded version ( i have tried a few older and the latest one and all show the same message)
the file Itunes cannot be read because it was created by a newer version of itunes. I have downloaded the latest version
Cheers
AndrewTell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first. -
I just got an iMac and used migration tool (PC to Mac). When I try to then open iTunes i get the message
<The file "iTunes Library.itl" cannot be read because it was created by a newer version.... download iTunes now?>
...but i have it already downloaded, when I press download now, it tells me I already have it, but it still won't let me open iTunes???Unless you've tried to install an older version of iTunes that message likely indicates a corrupt library file. See Empty/corrupt library after upgrade/crash...
tt2 -
I just installed iTunes on my new laptop. When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes". I have no idea what this means or what to do about it. I can't even find a file on my computer like the one referred to in the pop up. I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes. What should I do to fix this?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future.
Maybe you are looking for
-
How do i add a Full Screen Button?
Hi guys, I have used Quicklime X - File > Save for Web option to upload a video to my web site. This gave me a Java Script player and code to embed into my site, i have all the files running local on my server and the videos works well. My problem is
-
I lost the output sound on my ibookG4
So I just installed Leopard on my ibookG4 and now my OUTPUT device for sound is no longer working. when i turn my computer on it makes the normal opening sound, but when i try to listen to itunes or anything that has sound it's dead. i looked at my s
-
I do not believe there is a way but it would be nice if there was an option to record for the web on a P2 card. I am recording tech meetings (HVX200) and uploading them to the web, taking out the extra step of compressing it sounds like magic.......i
-
Dreamweaver Navbar Widget??
Will DW ever be putting in a CSS navbar widget or JS navbar. It seems so ridiculous that there is all this stuff and no way other than to use an unordered list and reformat the thing such a waste of time. Muse has one and it's great!
-
Multi lingual...urgent
Hi, We are in the process of developing a Multilingual portal. I have a login page which has some info about the company etc. How do I /where do I store this information and How to transalte to the corresponding lagauage's translation if I have the e