JUST replaced my hard drive and still hearing a clicking noise?

So, I'd been hearing an occasional clicking noise (more like a hard, sharp "tap") from my hard drive. It started about a week ago. Two days ago I got apple to replace it and brought it home last night. There's a problem, however - this new one is clicking too - the noise is slightly more muffled than before, but still relatively loud. By an "occasional" click, I mean once an hour or so, more often if I'm running intensive programs but sometimes just if I click a link on the internet.
Is this a defective drive, or is it something else? It clicked about 10 minutes after startup, when I was playing video in Final Cut Express. I also had Firefox open. I have 223GB/500GB on the hard drive (data was transferred over from the old one).
I'm positive it isn't the data itself, because that couldn't cause a physical discrepancy in the HD. Or could it?
Really hoping I don't have to send this one back to apple too. The laptop itself is barely three months old.

Heads park/unpark, HD spins up, spins down, as platter/s need to be accessed, whether read/write. I'm not able to predict exactly when that would occur (make someone else can explain that further). Is it possible the replacement drive is faulty? Certainly. Is this the same brand/model as the original HD?

Similar Messages

I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
Where do I find this library?
thanks
Shak

Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
(1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
If that doesn't work
(2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
This may take a while. Once completed, re-open iPhoto.
And that should (I stress should) cure it.
Good luck.

I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty. No music, movies etc are there. Please help thanks

I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty. No music, movies etc are there. Please help thanks

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Windows images, but you get the point. Depending on the age of your library the library file might not include the .itl extention. Make it match the file you are replacing.
See MusicFolder Files Not Added and Super Remove Dead Tracks for tools to catch up with any changes since the backup file was created.
tt2

I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

XI have just replaced my hard drive and uploaded my backup. Now iPhoto won't launch or reset and relaunch. Suggestions?

I have just replaced my hard drive (more memory) and uploaded my Time Machine backup. Now iPhoto won't launch or reset and relaunch. Suggestions?

Well without no information to work with, try reinstall.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

I have just replaced my hard drive and downloaded Yosemite and now I can't access my photos from my external hard drive

II've just replaced my internal hard drive for my desktop because it failed And installed Yosemite. I had an external hard drive but it had Mavericks and now I can't access my old iPhoto. What can I do?

backup your iPhoto and install iPhoto 9.6 - if you had iPhoto '08 or earlier then you need to download and run the iPhoto library before launch iPhoto 9.6
If that does not help then you actually need to tell us information and details - like version of iPhoto. exactly why you can not access your photos and any message you got
LN

I just replaced my hard drive and want to reinstall Lion. Was only able to use my original disks and upgrade to 10.5.8 so far.

How can I re-download and install Lion?
2007 iMac hard drive failed yesterday. Replaced drive with a 1Tb from apple and used original disks and software update to get 10.5.8 Leopard running. Updated QT to 7.5.5 so can launch and log in to iTunes. I had purchased Lion previously but can't seem to access the Mac App store to re-download and install my purchased copy.
Thanks
MJ

Upgrade to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Once you get this far you can look to reinstall Lion from the Purchases page in the App Store or by purchasing a Lion download:
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

MacBook pro boots to prohibited sign and apple has replaced the Hard drive and it's still didnt fix. They want to replace the hard drive AGAIN?!

I've had this issue for almost a month now, and they have tried multiple things to fix it from software re-installs to wiping the drive and they replaced the hard drive and cable but now that it is still not working they are suggesting installing another hard drive after it clearly didn't work the last time they replaced it. Help! I've contacted customer relations and the only thing she told me over and over is that they are working diligently to fix it. I'm a music teacher and that is currently the only computer i have and I use July to prep all my lesson plans and music. School starts august 18th and I feel like I'll be back in the store with the same problem again right when school starts. Any suggestions, ill probably be writing a letter very soon, any other suggestions?
Btw I have tried not backing up from time machine to rule out the possibility of something of mine corrupting it and it still did it.
Thanks for your help apple community!
David

Wholly Crap, No Joke, the lady from the apple store called me up at like 5pm and said "You know what?" and my reply was....... "what" and she goes, "You've been very patient and we understand you've been in and out in the last 3 weeks so we've decided to just give you a brand new computer" She gave me a brand new MBP! SO FREAKIN STOKED, my 2008 macbook pro for a new 2011 2.2ghz with 4 gigs of memory (Upgradeable to 8!!) The only downside is that since I use this for recording audio with Pro Tools well as recording audio with Pro Tools I needed the 7200rpm drive like my last one, and with her eyes i felt the "Beggars Cant be choosy" look flow upon me. But I shrugged it off and She actually told me to take this one, use it for the next week while the one she is ordering for me comes in!! So Bottom line IMHO (first time i've ever used that acronym in a forum) Apple Definitely has some awesome customer service!!
--this is one of those posts that I usually read and say "***, why cant that be me!!"
I <3 Apple.
David

I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

http://support.apple.com/kb/HT1449

I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
If you have another Mac, you may be able to use FireWire target disk mode.
If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility.

I just replaced the hard drive on my g4 PowerBook -I don't know where my original software is and apple won't touch it since its "vintage". Does anyone know what my options are to get my computer working again?

I just replaced the hard drive on my g4 PowerBook -I don't know where my original software is and apple won't touch it since its "vintage". Does anyone know what my options are to get my computer working again?

Hello and welcome to the support community
You only option is to buy a copy of Mac OS X, either the retail disk or system disks.
There are places you can by a copy of Mac OS X, like online vendors, Amazon or eBay.
System disk are gray and come with more than one disk. Retail disk are black with a 'X' on them and often come as one DVD disk.
Not sure what version your going to require as you haven't provided any specification and model details.
I would safely assume being a G4, it would be happy to install Mac OS X 10.4 Tiger.
If you could let us know the PowerBook you own, then I am sure we could advise you further.
Best of luck

How do I retrieve my purchased songs and playlists from my iTunes account? I have just had to replace my hard drive and have lost pretty much everything!

How do I retrieve my purchased songs and playlists from my iTunes account? I have just had to replace my hard drive and have lost pretty much everything!

You can redownload your iTunes store purchases, but you'll need a backup to recover the playlists.

I just replaced my hard drive to fix an issue, but I'm still having issues, more specifically the grey load bar.

I just replaced my hard drive at the advice of a Genius from my local Apple store, by doing so it was supposed to fix my issue of a grey load bar and a few other issues such as always having to restart my computer.
Now, a month later the same issues are coming back even after running Disk Utility, so I'm curious as to if there are any other issues that could result in these problems?
The most frequent problem I face is that the grey load bar will load about 1/4 of the way and then stop. The load gear will continue to spin, but I am never taken to the login screen.
So, any ideas?

Heads park/unpark, HD spins up, spins down, as platter/s need to be accessed, whether read/write. I'm not able to predict exactly when that would occur (make someone else can explain that further). Is it possible the replacement drive is faulty? Certainly. Is this the same brand/model as the original HD?

I just replaced my hard drive on my imac and now when i turn the computer on the fan is running and slowly gets louder and louder. how do i turn it off?

I just replace my hard drive on my imac and now when i turn the computer on the fan starts running and keeps getting louder. How do i turn it off?
thanks.

If your machine was made after 2009 you probably installed th wrong HD. Beginning in 2009 Apple began using HD's that had an integrated fan sensor. If you did not use one of these drives then that is the problem. You should contact OWC (www.macsales.com) or visit your local AASP and they will help you select the correct HD to use.

JUST replaced my hard drive and still hearing a clicking noise?

Similar Messages

Maybe you are looking for