Just reset Ipod, now I have to register again?

I just had to reset my Ipod, now it tells me I need to register the Ipod which I've already done when I bought it. Do I really have to???

Resetting the iPod does not usually result in the need to re-register, so it may be that you (still) have some sort of problem on the PC itself (which resetting the iPod was no cure). If you fix that problem you may not need to re-register.

Similar Messages

  • Reset ipod now will not connect via wifi

    reset ipod now will not connect via wifi

    Try:
    - Restting the iPod (you may have done this)
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Resetting network settings: Settings:General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • I recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

    i recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

    I would try contacting Apple.
    http://www.apple.com/support/ipodtouch/contact/

  • I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.

    I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.

    One likely reason is the % battery is not that accurate because of the smaller battery capacity in the iPod compared to iPhone and iPad. Users why use a % battery app post that the % reading changes a lot.

  • Hey,i forgot my login password,so i changed the password by using terminal command(reset password).now i have new user name with new password,but i can't find  my data which i have saved on mac.please help me out in this matter.

    hey,i forgot my login password,so i changed the password by using terminal command(reset password).now i have new user name with new password,
    but i can't find  my data which i have saved on mac.the storage is showing data used and free space on the disk
    please help me out in this matter.

    How did you change your user name?
    resetpassword wouldn't have done it. If you managed to create a new user, then your data is still in the old account.

  • On starting up my new iPhone 4s, it freezes on the apple logo. I have tried the reset buttons trick and have tried restoring again too but nothing works. Any other ideas? Or is the phone simply corrupt in some way?

    On starting up my new iPhone 4s, it freezes on the apple logo. I have tried the reset buttons trick and have tried restoring again too but neither works. Any other ideas? Or is the phone simply corrupt in some way?

    Did you try to connect in recovery mode and restore without using the latest backup?
    Recovery mode and  How to back up your data and set up as a new device
    If setting up as new device does not work, you'll have to get it serviced or looked at by visiting an Apple Store.
    Did you try to remove the ipsw firmware file and restore, to make iTunes download a new copy from Apple?
    Those files are located here:
    Rename, move, or delete the iOS software file (.ipsw)
    iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
    Mac OS X
    iPhone
    ~/Library/iTunes/iPhone Software Updates
    iPad
    ~/Library/iTunes/iPad Software Updates
    iPod touch
    ~/Library/iTunes/iPod Software Updates
    Note: The tilde "~" represents your Home directory.
    Windows 7 and Vista
    iPhone
    C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
    iPad
    C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPad Software Updates
    iPod touch
    C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
    Note: If you don't see the AppData folder, you may need to show hidden files.
    Message was edited by: Ingo2711

  • HT203167 I deleted an audiobook out of my iTunes library. Now I have to pay again to download it. Is this the only way?

    I deleted an audiobook out of my iTunes library. Now I have to pay again to download it. Is this the only way?

    Have you checked to see if the deleted file is still in the recycle bin. If so you can restore it and add it back into the library. If it is on an iPod or iOS device it could be transferred back to your library. As Steve says audiobooks from the iTunes store are currently supplied on a one time only basis, unlike most other purchases. Hopefully the position with audiobooks will change too over time. In the meantime you could Contact Support and explain the circumstances surrounding your error. They may be able to grant an exception and resupply your missing audiobook.
    tt2

  • I have my creative cloud blocked because, i just want to pay and have it working again

    I have my creative cloud blocked because because i did not pay one month the subscription, i just want to pay and have it working again. I need it to work.

    Hi asantanetwork,
    It looks like there was an error with the settlement, however i have checked now and there should not be anly problem, please launch the application and click on license this software tab, and enter your Adobe id and password.
    It should work perfectly fine.
    Please do send me a message in case if it does not works.
    ^Ani

  • Ive lost my apple ID for my ipod, now i have an iphone and i want to use the same apple ID for both can someone tell me how to do this

    I have lost my apple ID for my ipod, now ive got a new iphone and i want to use the same ID for both, can anyone one tell me how to do this? ( i no my ID for the iphone)

    Just use the same ID.
    These may alos help:
    How to use multiple iPods, iPads, or iPhones with one computer
    What is the best way to manage multiple...: Apple Support Communities

  • Did reset, but now I have no bar on top with File, bookmarks etc. no printer icon. How do I fix this?

    Did a reset to fix my problem with Firefox but now I have no bar on top with file, bookmarks, tools etc. Firefox created an old Firefox data folder on my desktop. Not computer savvy...how can I fix this problem?

    hello Elainef, if you are missing toolbar buttons you can go into firefox customization mode and place them where you'd like to have them. in there it's also possible to enable/disable toolbars like the menu bar:
    [[Customize Firefox controls, buttons and toolbars]]

  • Just received my iPod, now I have to send it back for repair. What?!?!?!?!?

    I just received my iPod today. It isn't working correctly. I called tech support and they said send it in for repair and it'll be back in about 2 weeks. What? I just got it today. Shouldn't they just send me another one? Am I being unreasonable?

    I don't think that you're being unreasonable but I also don't think you'll get anywhere. I don't object to such an inconvenience if a problem occurs after purchase. However, I have a serious issue with having been sold a defective product.
    Good luck!

  • Finally able to reset ipod, now I can't get it to work with itunes

    I would appreciate any assistance, as I am growing very frustrated.
    Friday night I was conducting a routine manual sync of my ipod. Everything was routine until I hit the disconnect button in itunes. My ipod disappeared from itunes device section, but "do not disconnect" stayed on the ipod's screen. I have had this problem before, and fixed it by resetting the ipod, so I tried that. The ipod would not reboot- I could hear noises as if the hard drive was spinning up, then the drive would stop. Then it would spin up again...etc. It did this over and over again, never even getting as far as the apple logo. I was able to put it into diagnostic mode but wasn't able to figure out anything helpful. Later that evening, I tried again to get the ipod to reset, and this time it got as far as the logo and stayed there.
    I plugged the ipod into an outlet and let it charge overnight, and discovered that the next morning it had evidently reset to factory settings- all my content was gone, and the ipod asked me to select my language on startup, but it was again booting normally. However, when I hooked it back up to my computer via usb cable, I had problems again. Windows asked if I wanted to reformat the drive and I said no. Itunes refused to recognize that I had plugged the ipod in, even though windows clearly had and the ipod had the "do not disconnect" symbol up. I tried resetting the ipod and the computer. This time, itunes recognized that I had connected the ipod and asked if I wanted to reformat it. I said yes but itunes quickly froze and would not allow me to close it or end the process via task manager. I had to reboot to get itunes working again.
    This is the situation I'm in now. Windows clearly recognizes the ipod- it shows as working in device manager and windows always asks if it should reformat when I plug it in (I tried saying yes once, but that didn't do anything). When I tried to select the ipod in windows explorer, explorer froze. When I open itunes after the ipod has been plugged in, or plug the ipod in while itunes is running, itunes refuses to recognize the ipod and freezes completely; task manager cannot end the process and the only way to restart itunes is by rebooting the computer. Trying to disconnect the ipod via windows' 'safely removal hardware' utility causes the utility to freeze and does not affect the ipod. The only way to get the ipod to stop displaying "do not disconnect" is to reset it, which again causes the ipod to (slowly) reboot and ask me to select a language.
    I have tried reinstalling itunes. (It's 9.0.3 now.) I've tried switching usb cables. I've tried switching usb ports. I have tried to put the ipod in diagnostic mode, and I've tried putting it in disk mode- I'm not able to do either. I've been through all the relevant apple support pages I could find and I'm still unable to even diagnose exactly what the problem is, much less how to fix it. It seems more likely than not that the problem is the ipod itself rather than itunes, given my problems Friday night, but I have no way of knowing for sure.
    The ipod is a 5g, 30gb, that I purchased new in December of 2006. I am running itunes 9.0.3 on windows vista home premium. Let me know if more details of my hardware/software are needed.
    Thanks,
    Lindsay

    You're not alone. I am having similar problems with my Ipod 5th gen 30gb.
    When I connect it to my laptop (Vista - basic) it is not recognised by itunes. Itunes simply locks up.
    So far I have tried the following to no avail:
    Checked my pc's device manager - it recognises the device and says it is functioning properly.
    Checked the drivers to make sure they are upt to date.
    Uninstalled & reinstalled a previous version of itunes (as it worked fine before the latest release).
    Reinstalled the latest itunes.
    Reset the ipod.
    Put the ipod into disk mode and reconnected to itunes.
    Have tried to use the windows tool to scan and fix any bad sectors but it fails to complete a scan without locking that up as well.
    Placed into disk mode when fully charged and then allowed the battery to drain completely. Then reconnected ipod (in disk mode)and it still is not recognised and locks up itunes.
    At this point I dont really want to part with another $300 odd dollars for a new one.

  • Recently just got ipod restored..Doesn't register in my itunes at all help!

    hey...just yesterday i went to apple beacause my iPod had a unhappy face and the guy restored my software i believe and told me to go home charge it for a couple hours and then to replug it into my pc so i could store my music again. My iPod isn't coming up though in my iTunes. How do i fix this because right now i can't use my iPod at all.
    Main Question: How do i get iPod to be recgonized by my Itunes? Thanx you to anyone who can help.

    hiya!
    have a look in "My Computer" while the ipod is plugged in. is it showing up there?
    if it isn't showing up in My Computer, try:
    Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear
    iPod missing in "My Computer" or in iTunes on Windows
    if it is showing up in My Computer, try:
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod shows up in Windows but not in iTunes
    love, b

  • Vista just updated and now we have a black wallpaper - Satellite P300

    Windows Vista updated last night on our P300 laptop and now acts rather weird.
    We get only a solid black wallpaper and a lot of the icons we had are no longer there, and it wont change the wallpaper. Most programs arent loading at startup like normal (only the anti virus) and most things are missing from the start menu... has this happened to anyone before? It almost sounds like what they do when you have a pirate copy of Vista (and of course this one IS legit as it came with the lappy)...
    Any suggestings?
    I havent physically got to see the laptop and wont be able to til tomorrow myself... Though knowing my mate its probably only something simple but thought there check around before I get there incase.
    Thankyou :)

    Solved the problem..
    A windows update some how damaged the register.
    I hit log off in windows, then tried to click the user name to log in (we have it set to just auto log in) and while trying to load the profile, we got a The User Profile Service service failed the logon.
    A system restore fixed the issue... :)

  • Box just reset itself, now wont bring up guide, dvr, or info about shows

    my hd dvr box just randomly reset itself for no reason, and now it only displays the channel, wont let me bring up a guide, dvr or information about the program, athe channel up and down work, however it wont bring up information about the channels at al, any help on this would be appreciated, i reset the box and router and nothing happened..... ive had nothing but problems with these CROOKS at verizon, cannot wait to leave them
    Solved!
    Go to Solution.

    Your box is probably taking new code.  Leave it be for 15-20 min.  Each time you reset it, you re-start the code download - just making it take that much longer.

Maybe you are looking for

  • Data betwen PSA and Cube

    Hi experts, I can see data in all the fields in PSA, but I don't see data for some of the fields in the Cube. The DTP ran succesfully and double checked transformations are mapped correctly. I am struggling to understand why this is happening? Please

  • Top power button doesn't work all the time

    Top power button works intermittently

  • Audio Redirection and Remote Desktop Web Access

    I recently deployed a 2012r2 Remote Desktop solution. I have a collection published for remote desktop sessions and have configured it to allow all redirection shown in the interface. However when users connect through Web Access, they do not get aud

  • Deleting a mailbox (1 of 3)

    I have 3 email accounts on my macbook. All mail arrives via the mailbox. I want to delete one of the mailboxes. Will I lose ALL archives messages from said mail account if I do that? I have a huge number of sub-mailboxes containing messages from the

  • PanelBox Disclosure icon is calling only checkbox value change listener

    Hi I have a page fragment, where i have a switcher and showing different facets based on condition, in my second facet i have a panel box which has a panel group layout which has one selectbooleancheckbox and one outputtext. When i click on the check