Just say no to iTunes 6.0.3
After installing 6.0.3 and downloading some mp3's to my ipod, I was shocked to see that all of my playlists in the ipod were gone.
The playlists are still intact in iTunes.
I'e enver had this castrophic of a problem with iTunes before.
Has anyone else seen this?
N/A- using newer version of iTunes now
Similar Messages
-
I recently aquired a new iphone 4s because my old one broke. I backed it up on my itunes but now it wont give me the option of using the phone, it just says connect to itunes. I have synced it several times now and dont know what to do, please help me!!
I recently created a new apple ID
Bad idea.
Content bought with an Apple ID is forever associated with that Apple ID. Apple will not transfer content from one Apple ID to another and Apple will not merge Apple IDs. Unless you are prepared to forfeit all the previously purchased content and buy it all again with the new Apple ID, you will need to maintain the old ID to update and redownload your content. -
Ipod touch G4. Daughter turned it off and restarted it and now it just says connect to itunes. When I do it isn't recognized but shows its charging. I've tried different usb cords and a different computer, also tried restarting the Apple Mobile device as it tells me in help forum. Any help is appreciated.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer -
not able to get passcode off its doing nothing. it s just say connect to itune and it want do that so i guess i will send it back
You can't remove the Passcode if you can't remember it.
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
Instructions can be found here.
http://support.apple.com/kb/ht1212
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
My unlocked iphone 4 just says plug into itunes when i insert my Etisalat (UAE) sim
My unlocked iphone 4 just says plug into itunes when i insert my Etisalat (UAE) sim. it then says restore. i have restored the phone a few times.still the same problem. my sim works in my samsung.
Hi marissacav,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
- Judy -
Why wont my itunes start? it just says error new itunes library
my itunes wont start, it just says error new itunes library
You have to go into the iTunes folder, open the subfolder labled "Previous iTunes Libraries" and delte the most recently saved library. Actually can I assume this is because you installed iTunes 11, then like most people, saw how much the new chanbes suck and went back to an older version. If that is the case, when you go to your "Previous Library" you have to delete any library that was created with iTunes 11. I just went through all this on Thursday.
I really hope Apple is listening to all the complaints on here. The very least they can do is give an option for something like a "Classic View" like microsoft has done in the past with Office, and Windows -
HT1212 my itouch wont let me enter a password it just says connect to itunes
my itouch won't let me enter a passwork it just says connect to itunes
You will have to put your iPod into Recovery Mode so that iTunes can restore it.
Note that all data will be erased due to the full restore the iPod will go through.
If you don't want this because you don't made a backup yet, use an external software to save photos and other data.
How to enter Recovery Mode:
http://support.apple.com/kb/HT1808 -
It just says go to itunes support?
I'm trying to buy some coins on the game Plants Vs Zombies and trying to download the movie Tangled.
When I try to buy them a window pops up saying, please contact itunes support to finish this transaction.Instead of buying coins on PVZ- use the Last Stand mini-game to generate coins. Just plant a bunch of coin flowers and collect- you dont have to win to keep the coins.
-
Hello,
I have a ipad 1 with me which is saying connect to itunes but when I connect to my laptop for itunes, ipad does not show up on itunes and ipad does not start also....
AbhishekTry recovery mode now.
iOS: Unable to update or restore - Apple - Support -
i use to be able to download everything i wanted, just tap and sign in and good to go, now it takes me to a verification page where i have to put in my security code for my credit card. but then it says contact iTunes support... its getting really annoying when i try to take my card off it says it could not be saved. or the same contact iTunes support ****
The 1G iPod can only go as high as 3.1.3. The 1G does not have an internal speaker or volume buttons on the upper left edge.
Identifying iPod models
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version. -
My iPad will not allow me to update apps although I have no problem buying new ones. It says "cannot connect to iTunes" each time I try.
Same problem for me, too. It happens on my iPad, iPhone, and iMac. Weird because I have great Internet connectivity and I can log into and view my iTunes account. I've downloaded three new apps with no problem. But my iPad shows 14 apps needing updates, my iPhone shows 2, and my iMac shows 1. In all cases, clicking on "update" and entering the password results in the message, "Cannot connect to iTunes Store". It's the same result across multiple WiFi networks, even after resetting them.
I'll see if someone at the Genius Bar can help and then I will repost. -
I have tried turning my phone, and laptop off, I also uninstalled and re-installed iTunes.
Hello errod2014,
It sounds like you are unable to see your phone in iTunes after the computer turned off unexpectedly during an iOS update. I recommend resetting the phone first, and then attempting to restore with iTunes again.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If you are still unable to see your phone in iTunes, follow these steps for Mac or these for Windows.
Thank you for using Apple Support Communities.
Take care,
Sterling -
I have ipod touch 4(8gb),iTunes said to update and restore(didn't know it had to be turned off),followed the steps and iTunes said it cant restore and error 2009.now ipod only shows connect to iTunes and wont do anything else,not even power off,please help.
Try the troubleshooting for that error code on this page : Resolve iOS update and restore errors.
-
If Someone could help me out that would be GREAT!
try reset
hold on/off button and home button together for 10 sec
try restore
http://support.apple.com/kb/HT1414 -
i just updated to the new ios version, and now i cant set my phone up as an existing one. i have put it in recovery mode and tried to restore it but it wont work. Itunes will let me set it up as an existing phone and back up all my data but once i unlock my phone it goes through the setting up options and then asks me to either set up as a new or existing phone and when i choose existing it just says connect to itunes and does nothing. can anyody help?
Seems like you are restoring from a blank back up if it is still asking you those 3 options of set up as new, restore from itunes or icloud back up. Set the iPhone up as new then manually restore from a back up. Follow the steps foriTunes 10.7 or earlier in the article below as it is the same process for iTunes 11:
http://support.apple.com/kb/ht1766
When you do this you will be able to check for backs showing date and time. Be sure to choose a back up made before you restored to factory settings.
Maybe you are looking for
-
Dear All, We have a scenario where imported items are coming on FOC. I have tried ticking free item check box in PO but then i cannot enter any duties the whole condition tab disappears. How to tackle the problem. Should we have a different pricing p
-
How does one print to enterprise Windows print services in Yosemite? CUPS 2.0 problem?
One of my co-workers upgraded to Yosemite yesterday and it broke his ability to print to our corporate printing services (which are built around a Windows print server). Obviously, the printer discovery in the System Preferences can't find the Window
-
Resizing online and standby redo log in dataguard setup.
In 10gr2 dataguard i would like to increase redo logsize from 50M to 100M. on primary standby_file_management=manual added online redo groups with 100M log switched drop old one and readded with 100m deleted log added in step2. same for standby redo
-
why does the webcam on my macbook pro not work? http://www.surfclubdrusus.nl/webcam.html neither on safari nor on firefox i have the new flash player installed
-
I have a large amount of files to be compressed...
avi format that I'm changing to DV NTSC so that I can edit them in FCP. They all have the same output settings and same destination. Is there a way to apply the same settings to several files at once instead of having to drag them to each individual