Just setting up my iphone 5, and its syncing everything from my previous iphone, except my photos and text messages. Ive been trying to fix this now for about 4-5 hours. Help!!!!!!
So, I backed up my iphone 4. Set up my iphone 5, pressed sync and it did its job. However, its seems to have synced everything except my photos and text messages. Basically the most things I use on my phone! Ive searched for solutions all over the internet, tried them all and still no luck. this is driving me crazy, been working on it for hours now. someone please help!
Much appreciated
You do not sync text messages.
Did you restore the iPhone 5 from a backup of your old phone?
If not, do so to put everything back. This is assuming you want/need you sms messages.
Pictures should already be on the computer, then they can be synced to the device.
Similar Messages
-
hi, my new device was set up in the store that I bought it from. How can I transfer all old text messages over to my new device? I have followed the icloud back up steps on this page. Please help, thank you.
Its an iPhone 4
Message was edited by: zzziggy85Here is how
http://support.apple.com/kb/HT2109 -
I have been trying to update my iPad2 for the past 3 hours. It just sets there doing very little and says its going to take 9 hours. What am I doing wrong? I've never had this problem before. Also can I update from any other computer? Just in case it is my lap top.
Do you get any error messages ? If you get a network timeout error when downloading the update then try temporarily turning off all your firewall and antivirus software until the download has completed.
It's best to only update via your own computer, otherwise you risk losing all your iPad's contents - updating to iOS 5 wipes the iPad and then restores your backup. If you having problems downloading the update then you could try downloading the update file via a browser on another computer and then copying that file to your laptop for the actual update . -
hello ive been trying to get this matter token care of for the past 24 hrs and still no help im getting very upset now I paid 100 plus $$ to have this program that isn't even working I would like to speak to someone about on the phone I got a 1800 number for tech but everytime I call it hangs up and says to chat........ ive been doing that all day yesterday its kinda getting old telling the same thing over n over again so I would like some real live help a number I can call or someone can call me 402 802 1211 everytime I try to do something on this it ask for my serial num I put it in and it says invalid number and when I do my pics it has trail across them
Hi,
I'm sorry to hear that you are having problems but this is a user to user forum and only occasionally visited by Adobe staff. Depending on your version of Photoshop elements, you may be able to get help through the chat sessions starting here
https://helpx.adobe.com/uk/contact.html?promoid=KLXNA
If you give us details like your operating system, Photoshop elements version and the problem you ae having, someone may well be able to help you.
Brian -
I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
My iPhone does not always send iMessages to other iPhones who have their iMessages on. Most times I text a new contact with an iPhone first, they show up as regular text messages. How can I fix this?
Yes to receive an iMessage the recipient would need an iOS device (iPhone, iPod, iPad) and an internet connection. This is a messaging serviceprovided by Apple so the recipient does not need to check emails. If the contact does not have internet access at the time the iMessage is sent then a normal SMS through your carrier can be sent instead if you have "Send as SMS" turned on in Settings>Messages.
-
Forgotten my security questions and cannot purcahse any apps etc. solutions on internet with rescue e-mail don't work . Have been trying to resolve this issue for 3 days now
If you don't have a rescue email address (or you do but aren't the receiving the email to it) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
Can someone pls help me?? Okay..I've been trying to fix this for DAYS now! When I sign in (under settings) w my new apple ID, then go to update or purchase something I cannot get the new apple ID to come up. It's still using the old one (which is disabled) ..please help!
Delete what? The ID's? They cannot be deleted - you just quit using it.
If you still have one old ID - that you have purchased content with - you are saying that the password no longer works with that ID? Did you try to reset the password for that ID?
Read this - instructions if the ID was disabled for entering the wrong password.
http://support.apple.com/kb/TS2446?viewlocale=en_US&locale=en_US
If it gets too involved - you can always contact support.
http://www.apple.com/support/appleid/
Just do not create another ID! -
I have a new i4 phone and am new to Apple. My imessaging will not send out any messages. How can I fix this? HELP
about message http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755
settings - message - imessage - is turned ON? Do you have it activated?
Make sure you have a good wifi or cellular data connection.
Also you can only imessage other apple products who have imessage on. -
Someone is using iturnes with my credit card without my permission and I want my credit card number removed. I've been trying to get this matter resolved for months. I've lost all patients with this matter. I want my credit card number removed from your business.
Virginia Mezger
<Personal Information Edited by Host>Please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are we your fellow users.
Since you don't say what resources and methods you've been attempting to get this matter resolved, it's difficult to offer suggestions. But if your credit card has been used without your permission, your primary recourse should be to your credit card company to report the unauthorized charges and have them issue you a new credit card. If your card has been compromised such as to make unauthorized charges on the iTunes Store, it's highly probably that it can be used elsewhere.
As to removing the card number from your iTunes Store account, see:
http://support.apple.com/kb/HT1918
You should be able to change or remove the card information there. If not, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store, if you have not done so already. If you have, please post back with a summary of what they told you and perhaps someone can offer additional suggestions as to how to proceed.
Regards.
Regards. -
I am getting all my moms messages that she sends and receives in my messages. How do I fix this?
I am getting all my moms messages that she sends and receives in my messages. How do I fix this?
-
I currently have Mavericks but my original OS X disk that I have I'm pretty sure is Mac OS X 10.6.6. I'm not great with computers but am usually able to fix problems I have had with mine in the past. I have reinstalled and reset my computer to factory settings before, but I am locked out of my computer completely & can't get to my files to save them & I really dont want to lose them. I was in Safari earlier opening a file, the page started to not respond & froze up my whole desktop so I did a hard shutdown & restarted my computer. I haven't been able to get back into my account ever since. If my only choice is to lose my files & reinstall everything, I need detailed instructions because I actually attempted to do this at first, out of desperation to fix my computer & the installer was asking me to select what disk I wanted to reinstall lion to yet I dont have a disk for that nor do I know what it exactly is asking of me? Please help
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My friend recently got an iPhone today. Before our conversations were with the green bubble, because I had an iPhone and she didn't. Now that she got her iPhone, she texted me and I received it as an iMessage, but when I would reply it would send as a text message. I have made sure that my iMessage setting are set up properly, and that he phone I marked as an I phone in the contact but it's not working
When other users with the same 5s as I have, text her, it's iMessage as well and they're not having the same issue. I don't know why this is happening. I've tried deleting the contact and restarting my phone but nothing works
-
Hi, I know this is stupid, but without going into the how, I deleted important photos and actually backed up my icloud, so I think they are gone completely! I am furious with my self, is there anyway to retrieve this data from some space even if I have to be charged by apple ... just being hopeful...
Photo stream photos are not backed up, and when you delete them from one device, they are also deleted from iCloud and your other devices. If they were in your camera roll when you last back up you device, restoring the backup should recover them. Otherwise, they are, unfortunately, gone.
Also, photo stream photos don't use any of your iCloud storage so deleting them won't free any storage up in your account.
You can't really use iCloud to back up your photos. It's designed to stream them to your devices and share with others, not to back them up. In fact, photo stream photos only remain in iCloud for 30 days. In order to back up your photos, import them to your computer while they are still in your camera roll, as explained here: http://support.apple.com/kb/HT4083. Or, if you have a Mac that is signed into your account with photo stream enabled, and you are using iPhoto '11 9.2.2 or later, go to iPhoto>Preferences>iCloud and check Automatic Import. This will ensure that your photo stream photos are automatically imported to your iPhoto library where they will be safe (especially if you are using Time Machine to back up your Mac). -
I had some updates for several apps ,when I installed them they went to waiting ,and ,have been that way for about a week,What do I do now ?
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.
Maybe you are looking for
-
Error while trying to store PDF in Oracle's BLOB field
Hi folks! I'm having problems while trying to store PDF file in a BLOB field of an Oracle table This is the message code: Exception in thread "main" java.sql.SQLException: Data size bigger than max size for this type: 169894 at oracle.jdbc.dbaccess.D
-
Dynamic action on button click
Hi: I need some help. I am trying to create a dynamic action on the click of a specific button. I have set the Event to 'click" and the Selection Type to "DOM Object", but I do not know how to reference the button. I am using a standard template butt
-
I'm using the LabVIEW 8.0 evaluation CD and every time I try using the Instrument I/O Assistant I get this error message "Measurement and Automation Explorer or the Instrument I/O Assistant is not installed correctly. Please install these from the La
-
Cna't get IIS 4.0 to WebLogic 6.0 proxying to work
Hi all, It seems this post adds to many similar ones - the issue being that of successfully deploying iisproxy.dll, iisforward.dll and iisproxy.ini. I have IIS 4.0 running on NT 4.0 Server, and WebLogic 6.0 SP1
-
I'm needing to read an emf file or inputstream into a buffered image and haven't found any library that can do this correctly. Does anyone have any suggestions of a library that can handle this format? I know Aspose can do it, but it's not an option