Just shows the AApple logo

I am selling my iphone 4 and last night I selected to erase iphone. When it did it just went black. After holding down the home and stand by it now just shows the Apple logo on the screen and it will not turn off or do anything it is just frozen. I plugged it into my computer and it will not detect new hardware and itunes doesn't detect it either. It has been showing the logo now for 7 hours. it was last running ios 4. I can't get anything to work. Any help will be greatly appreciated. Thanks in advance.

Put your phone in DFU (Recovery mode) and reload the firmware.
See this link

Similar Messages

My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what can I do to start my iPad?

My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

My ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?

my ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
If you can help me facetime me at [email protected] or msg me.

It would help to know whether it ever did work, or is this a new iPad for you? If new, you need to connect it to a Mac/PC that's running iTunes in order to register and initialize it. If it used to work, try doing a reset.

HT201263 why does my itouch just show the apple logo and nothing else?

i went into my settings to restore all data and content, and it said it might take up to 4 hours so i let it do that and when it finished it just showed the apple logo when i restarted my itouch, i can reset it any time but itll just stay in the apple logo screen, and i tried restoring my itouch but it said it wouldnt let me for some reason. what do i do?

Because the iPod is sick.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT201210 i updated my iphone 4 to ios 6.. when it finished.. my iphone kept blinking just showing the apple logo.. i connected it to my itunes it didnt read.. help!

i updated my iphone 4 to ios 6.. when it finished.. my iphone kept blinking just showing the apple logo.. i connected it to my itunes it didnt read.. help!

Follow the instructions here > http://support.apple.com/kb/HT1808
Note: You may need to try it several times to get it to work.

My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?

My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?

Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766

My daughter Nano just shows the apple logo and that is it can'y do anything with it.

My daughters Nano just shows the apple logo and that is it we can not do any thing with it.

Have you tried a reset ? Press and hold both the sleep and home buttons for 10 to 15 seconds and see if it then reboots - you won't lose any content, it's the equivalent of a computer reboot. If that doesn't work then you might better help in the iPod forum (this is the iPad forum)

So i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off

so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.

See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Apple TV hanged and is now just showing the apple logo

Guys,
My aTV2 just hanged.
I tried a reset but now she is hanged on the boot and is now just showing the Apple Logo.
I tried another reset by pressing Menu+Down but again now I'm back on the boot and just showing the Apple Logo.
aTV2 LED is blinking.
Any idea on how to do this?
Thanks,

Have you unplugged from power and restarted?
If so, get a micro USB cable, hook it up to a computer with that cable alone, fire up iTunes and do a restore of the AppleTV firmware.

HT1551 My Apple TV is just showing the apple logo on my screen and light just flash on the Apple TV box

My Apple TV is just showing the apple logo on my screen and light just flash on the Apple TV box

Welcome to the Apple Community.
Which Apple TV do you have.

My iPhone4 is just showing the apple logo, after a while it shows the connect to iTunes symbol, I connected to iTunes on my PC to restore

My iPhone 4 is just showing the apple logo, then it changes to the connect to iTunes symbol, when I connected to the PC and tried to restore and update it shows an error, it seems it cannot recognise the phone, is there anything else I can do to get my phone working again?

Hi serpico656,
When you got the error restoring your iPhone, did it include an error number or description?
For an overview restore troubleshooting article with links to details, see
Resolve iOS update and restore errors in iTunes - Apple Support
If you know the update error number check out,
Resolve iOS update and restore errors - Apple Support
Take care,
Nubz

I just downloaded the software 6.1.3 on my i phone, 1 hour passed and it still didn't turn on. It just shows the apple logo on and off.

I just downloaded the software 6.1.3 on my i phone, 1 hour passed and it still didn't turn on. It just shows the apple logo on and off.

http://support.apple.com/kb/HT1808

My little brother messed up with my iPod touch 4th Gen by entering the wrong password , now all data is beeing erased what should I do.The iPod is just showing the Apple Logo and some buffering icon below it.Need help fast!I'm really worried!

I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!

- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore

HT1766 My phone is just showing the Apple logo now, but it had said i needed to restore it, what do i do and how?

My iphone 4 is showing the apple logo, it had said before to restore my phone because it was not able to recieve or make calls, what to do?

Unable to Update or Restore
http://support.apple.com/kb/HT1808
See Here for
Frozen or unresponsive iPhone

My mac won't turn on again, it just shows the apple logo and some code

My mac was freezing up a bit while trying to get onto lanaboards.com so I decided to restart it. I figured i might as well update it at the same time. So i did that and chose the restart option that comes up when you update. It seemed like the update went through, but then it told me that it couldn't update but i was asked if i wanted to restart it, so i did. For some reason it didn't restart for a couple of minutes so i turned it off by pressing the on/off button. When i turned it back on it made the sound and then the grey background with the Apple logo appeared. Suddenly this code comes up using the word "panic" a couple of times. I'm not gonna type the whole thing cause it's kina long. It also says "Mac OS version: not yet set" (maybe cause i tried to update?) and "Kernel version: David Kernel version 12.2.1" It also says "debugger called: <panic>"
I won't be able to get it to the apple store for a week because everything closes down on thursday because of Easter and the buses seem to not go tomorrow and no one can drive me. I hope there's something i can do cause i have an important exam (100% of my grade) in two weeks so I'm freaking out a bit here. I also have some stuff due next week that just went up.
I really hope someone can help me, or at least know what may be the problem.
PS. I'm not 100% sure which operating system I have so i chose what i assume is the second newest iOS cause I know i have iOS at least
PS 2: My hard disc crashed about two months ago and was fixed at my local apple supplier, if that may have anything to do with the matter.

you are not in MacBook Pro forum, so might be harder to swap out and replace hard drive but you should definitely have had them do that or even yourself.
Make sure you are at least using TimeMachine AND another backup method to clone your system drive so you always have a working 'spare' backup drive you can boot and work from - USB3 is good, TimeMachine even works decently for some on USB 2.0
Finding out why and troubleshooting a panic is a matter of trial and error after taking a look at what hardware, what software you installed (and some of which should be removed), even whether it is triggered by heat from processor or RAM (memory) errors, and memory errors can be triggered by software.
Reset SMC
http://support.apple.com/kb/HT3964
Resetting NVRAM
http://support.apple.com/kb/HT1379
Safe Mac Guide
http://www.reedcorner.net/mpg/
About Mac OS X Kernel Panics:
http://support.apple.com/kb/TS3742
Resolving Kernal Panics
http://www.thexlab.com/faqs/kernelpanics.html
http://reviews.cnet.com/8301-13727_7-10344626-263.html
http://macs.about.com/od/usingyourmac/qt/Troubleshooting-Os-X-Kernel-Panics.htm
http://support.apple.com/kb/TS3742
There’s trouble in my laptop paradise. I ended that with this caveat:
It’s much more comfortable to type on the 2011 model, with one big exception: the 2011 model runs much hotter.
I need more time to form a concrete opinion, but it seems so far that this CPU’s awesome performance definitely comes at a cost of increased heat and reduced battery life. For my intended usage as a desktop most of the time, that’s an acceptable tradeoff.
This turned out to be worse than I thought it would be, and today, the last day of my return period, I decided to return it and exchange it for a slower model.
The problem
Not only does the 2011 15” MacBook Pro run much hotter than previous generations, but as a result, the fans very frequently kick up to full speed (6200 RPM), greatly annoying anyone in the area who’s not wearing headphones.
I’ve done a lot of Google research and impromptu Twitter surveys, and this seems like a very common problem, exacerbated by a number of factors:
The quad-core i7 CPUs in the 15” run very hot, with a TDP of 45W, 10W higher than the previous dual-cores. Many people speculate that the 15” case and fan design just isn’t designed for CPUs that need this much cooling regularly.
The Core i7 CPU can use Intel’s Turbo Boost to dramatically overclock one CPU core to handle single-threaded loads whenever power and heat allow. It therefore hits its maximum TDP often when just one core is being maxed out, such as when Spotlight or Backblaze index new files, or when Time Machine is backing up.
The 2.2 and 2.3 GHz 15” models come with an AMD Radeon HD 6750M GPU, which adds significant heat. Modern 15” MacBook Pros dynamically switch between the low-powered Intel integrated GPU and the high-powered (and hot) AMD GPU as needed by applications, but the AMD GPU will always be used when an external monitor is connected — the Intel integrated GPU cannot output video over the Thunderbolt port in the 15”. (Oddly, it can in the 13” MacBook Pro and both MacBook Airs.)
It generates so much heat that it can’t be used in “clamshell mode” (closed, but with an external keyboard, mouse, and monitor attached), which has reduced airflow, without risking overheating, kernel panics, and possible long-term damage. I can’t see why Apple even enabled clamshell mode on it.
Some people report issues with the battery draining while playing a game. The 15” MacBook Pro comes with an 85W power adapter, but when stressing the CPU and GPU (such as when playing a game), the laptop draws about 93W — I don’t know enough about the electronics here to say for sure, but an insufficient power adapter capacity sounds like a plausible reason why the battery might drain under high computational load. If so, this is an embarrassing oversight by Apple.
The thermal paste seems to be very inconsistently applied, or there’s some other common manufacturing defect with the cooling system that varies per laptop. Many, many people reported having these issues and exchanging the laptop for a new one that shows far fewer issues. Many dedicated tinkerers have also reported success after reapplying the thermal compound between the CPU and heatsink, but that requires a very deep, warranty-voiding disassembly that I’m not comfortable doing. (I also haven’t owned thermal paste since 2001.)
Put simply, it sounds like the 2011 15” MacBook Pro has a lot of manufacturing inconsistencies and defects that result in improper cooling. But it also sounds like Apple wedged far too much power draw and heat into an enclosure that’s not designed to properly cool or power these demands. It’s not like Apple to release products like this.
But if I can get one working within my tolerances, it’s still the perfect computer for me right now. So I’m trying.
The attempted solution
Tonight, after requesting the return on my 2.3, I ordered a new, slower model that’s likely to run cooler with less fan noise. It’s the base-model 15”, but with an antiglare (matte) display added:
AMD Radeon HD 6490M: It’s manufactured on the same 40nm process as the 6750M, but has far less computational power, so I’m guessing this will result in much lower power consumption and heat.
2.0 GHz quad-core i7: This is the only CPU available with the 6490M. While I don’t expect it to be dramatically cooler-running than the 2.3 since it’s specced with the same 45W TDP, it does have a lower clock and lower Turbo Boost speeds, so I can probably expect an approximately proportional heat reduction.
So I’ll see what happens. I’m not sure what I’ll do if it doesn’t work out. This generation of 15” MacBook Pros has a lot of problems, and Apple really needs next year’s cooler-running Ivy Bridge processors as soon as possible.
http://www.marco.org/2011/09/20/heat-and-fan-issues-with-2011-15-inch-macbook-pr o

Just shows the AApple logo

Similar Messages

Maybe you are looking for