Just some weirdness.

When I set up a session I use a template, but somehow when I created the template I must have done something oddly wrong.
When the session starts it appears OK, but when I try to edit the track, I can only copy it, I can't delete or silence any portion of the track. So then I record on track 2 and before recording starts a message appears which says ' The read/write permission of only one access path to a file can allow writing Result code =-49 File = Audio 1<hatch>01.wav.
I am sure that there is something really simple that I have missed, could someone tell me what to do to remove this irritating problem.
Thanks
David

Just to follow up and get this marked as resolved...
I went down to the Apple store and talked to the people at The Studio bar and figured out what was going on. This is what we determined:
-I did shoot all the footage in anamorphic (which I already knew)
-When I captured the footage, I had different settings in FCP and only one clip was set as anamorphic (first problem)
-When I set up my sequences, I set them up as 4:3 DV (second problem)
To fix the problem, I went back to square one. First, I set all the clips as anamorphic since that is what they were. I kept the 4:3 sequences for various reasons. All the clips had black bars at this point. (Expected behavior.)
So I used the Motion tab to change the scale to 133% which gave me what I had intended -- 4:3 footage with the edges cropped, no black bars. There is a slight loss in quality but this footage is of a skating show under spotlights so it's not like the footage had wonderful quality to begin with. I think it looks okay played back on my HD tv and my customers are used to VHS quality so this is better than what they are used to.
I could have gone a different route. I could have marked the sequences at 16:9 Anamorphic. Then in DVD Studio, I'd have to change from using 4:3 to using 16:9 Pan-Scan for my Display mode. This would give me the widescreen version on a widescreen tv -- which would work better for the group numbers as I had no choice but to cut people off even when zoomed all the way out -- but would still play with the edges cropped on most fullscreen tvs.
I still might do this but I've already put a lot of time into this project and I need to burn 40 DVDs before I go to the Post Office tomorrow so I'll probably skip it for now.

Similar Messages

  • Just upgraded to cs6 from cs5, some weird glitches...

    I am noticing some weird glitches and was wondering if it was just happening to me or to many.
    Whenever I hover over the "Layers" panel and hover over anything it keep trying to show both, the standard mac hover over link hand and the adobe photoshop standard triangle cursor. It's as if it they keep interering with eachother.
    I have restarted photoshop.
    Even restarted my computer, but still have the same products.
    It's vary annoying because it also happens even when trying to get rid of Guide Lines, it shows the cursor you get on hover to remove a Guide Line and the photoshop triangle cursor flickers in and out inbetween the two constantly so I don't know if I am going to move a layer or a Guide Line lol.
    Any advice would be greatly appreciate!
    Jon

    Anything to do with a HUD (heads up Display)?  Sorry, I'm not a Mac user.   Can you upload a screen grab that shows the cursors?

  • For some weird reason now, every time I try to open a LinkedIn page it seems to get re-routed to a UPS page. Did I inadvertently trigger a script of some kind and, if so, how do I un-do it?

    For some weird reason now, every time I try to open a LinkedIn page in Safari it seems to get re-routed to a UPS page. Did I inadvertently trigger a script of some kind and, if so, how do I un-do it? This happens, no matter what the LinkedIn page is.

    Hi ...
    From your Safari menu bar click Safari > Empty Cacche. Quit then relaunch Safari to test.
    If that didn't help, go to ~/Library/Caches/com.apple.Safar/Cache.db
    Move the Cache.db file from the com.apple.Safari folder to the Trash.
    Quit then relaunch Safari to test.
    Doubtful just visiting a page in within the LinkedIn site triggers a script of any kind.

  • Hi, My mp3s and ripped CDs sound like some weird, ring modulated alien metallic 'thing'

    Hi, My mp3s and ripped CDs sound like some weird, ring modulated alien metallic 'thing' since installing 10.5, purchases sound fine, and the original files are not corrupted, but CDs are burned with the same distortion, please help! Thank you.

    Okay it seems i'm not alone, just the read the previous ongoing thread about this and will be rolling back to 10.4 to cure it. .

  • I am trying to get minecraft for my iPod touch. When I put in my apple ID it says that I have to verify that I can buy it. I click ok I pulls up a site ask me for my apple ID and then I put in my security questions. After that it ask me some weird questio

    I am trying to get minecraft for my iPod touch. When I put in my apple ID it says that I have to verify that I can buy it. I click ok I pulls up a site ask me for my apple ID and then I put in my security questions. After that it ask me some weird question like Who Is your favorite teacher and another question like what is your least favorite car model. I did not set those as my secure questions. So can u please help me

    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions

  • How do I set up my iTunes Genius to play selections from all, not just some, of my songs in my currently playing playlist?

    Last night, when I played my playlist songs with iTunes Genius, my iTunes, with one of my playlists selected, and set on "Shuffle On," "Genius Shuffle On, "Genius On," "Match On," and "Play," played selections from all of my songs in my playlist. Today, my iTunes Genius went back to the same problem it was giving me before last night. My iTunes Genius has been playing selections from just a few of my playlist albums. How do I set up my iTunes Genius to play selections from all, not just some, of my songs in my currently playing playlist?

    No backup is a huge mistake.
    You can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store ... - Apple - Support

  • Back up just SOME of the music library to an external hard drive

    I want to move just some of my music from my iTunes library onto an external hard drive (reason? the music cannot be got again, but right now I am not sure if I need it all or not).
    So I want to move, say, 50 albums from the main iTunes libraray to an external drive and then be able to move some or all of them back again at later date.
    Do I have to copy the whole library over to the external drive and then delete the albums there that I did not want to copy over?  Or is there a better way?
    And how will I copy back just some of the back-up albums at a later date - is it the normal "Add folder/file to [main] library command from the File menu?

    OK, I don't think I have been making it very clear what I am trying to achieve - let me try putting it differently!!
    I have one iTunes folder and, at the moment, that is all backed-up via SyncToy.  I only have music in iTunes.
    Think of that music as being of 2 types - part A that I want for definite, and all that music is also on my iPod (I have my iPod set to Sync manually with iTunes) - this is probably well over 100 albums; and Part B music, that is on iTunes, not on the Ipod, and that I am not sure yet if I want to have in iTunes and on the iPod or not (this was a load of music copied over from another iPod several months ago) - this might be a further 50 albums.
    So - part A, I want to keep and want to be fully backed-up.  OK, SyncToy does that currently by backing up 100% of iTunes.
    But part B - I want to copy the part B music to a different copy location, and then just keep there the part B stuff which, album by album, I will either delete completely (if I don't want it) OR want to copy back to iTunes.  Once this second copy is set up, I would delete from this copy all the Part A stuff, and also delete from iTunes all the part B stuff.
    I would then have:
    - part A stuff on iTunes, iPod and back-up location 1;
    - part B stuff on back-up location 2.
    So the main question is - from what level in the iTunes folder do I need to copy over to the part B back-up so as to ensure that, when I subsequently try to copy albums back from the part B back-up to iTunes, I get all the information, artwork etc that already exists for the albums?  Do I copy the music file; the media file, or the whole iTunes folder?
    This may sound all terribly longwinded but, for various reasons, I am not in a position to be able to decide all at once which of the part B albums I need to keep.
    Is that any clearer?
    Cheers!

  • [Solved] Firefox 3 betas give me some weird behaviour with images

    I understand that there will be problems with beta software, however I seem to have memory issues with the firefox 2 series, so I thought I'd give the beta packages a try. I'm using the firefox-nightly package from AUR (firefox3b4), and I'm getting some weird behaviour. The same behaviour can be seen in all firefox 3 beta builds, however. It's hard to explain the problem, so here's a screenshot:
    Notice that the image appears twice, once in the tab, and once in the tab toolbar next to the title of the tab. It looks like an attempted preview gone terribly wrong. Upon closing the tab, the tab toolbar shrinks down to the normal size and all is well. This happens with most images up to a certain size. Any one else experiencing this problem? Any suggestions? This is very annoying and I would like anyone's input on the problem.
    Last edited by valnour (2008-02-24 07:41:05)

    Wow! This issue was solved in #archlinux by Nuked. Apparently I had some funky bits in my .mozilla directory. Removing it solved the problem. Remember kids, IRC is your friend. Anyone else experiencing weird stuff with their Firefox install should give this solution a try.

  • Just some child in a webform?

    Hi,
    Please somebody of you can explain to me how to display in a webform just some child (not all child) related to member of a dimension.
    Example:
    Dimension: Account
    Member:
    Generation1: Product
    Generation2 : Sales
    Generation3 :
    - Quantity
    - price
    - 711111 (Revenue)
    I want to display in my webform just Sales, Quantity and Price. How can I do that?
    PS: I tried Ichildren(sales) but it didn't work
    Thank you

    Can I assume you have thought about using the Descendants function with missing blocks and data are suppressed? Otherwise, the only option that comes to my mind is to manually select members, but I know it is not ideal.
    Also, I would post this on Planning and Budgeting You may get more responses.
    Cheers,
    Mehmet

  • Just some thoughts

    Just some thoughts.
    Adobe says that piracy is one of the reasons for going to the cloud.  CC has to verify the subscription periodically why not add that process to the perpetual license for a nominal yearly fee.  On the other hand, why can't a user subscribe to CC for a month to get the latest version and then go on the web to get a crack?
    I also own, unless they go to a subscription, Elements 10.  Lots of functions that CS6 has for photo enhancements.  I found some plugins that really enhance Elements. e.g. ElementsXXL adds new menu items, icons, buttons, key shortcuts and dialogs, so they seamlessly integrate into the user interface of Photoshop Elements. ElementsXXL bridges the gap between Photoshop Elements and Photoshop and greatly enhances the image editing experience in Photoshop Elements.
    I am sure other plugins will appear to make Elements more like Photoshop.

    "Adobe says that piracy is one of the reasons for going to the cloud. CC has to verify the subscription periodically why not add that process to the perpetual license for a nominal yearly fee."
    Why on earth would anyone want to pay a "nominal yearly fee" for another nuisance created by Adobe.  They can already shut down perpetual license holder's software if they pull the plug on the activation servers.  Don't you know that their servers check our software now as it is?
    Just recently with the release of the CS2 software to previous owners, many people could no longer use their already-installed CS2 software because Adobe's CS2 servers were shut down.  What does that tell you?
    I'm not going the way of cruising the internet for cracks.  That's for disillusioned kids who think everything should be free.  When my CS6 software no longer works I'm going with another company.  Probably Corel for some of the programs.  CorelDRAW was always better than Illustrator anyway.  Industry standard doesn't always mean it's great.  It just means everyone is using it and they expect you to do as well.  Personally, I think Macromedia made better software before Adobe took them over and MM software was a lot cheaper.

  • The problems seems that the free trial what i am constantly paying for may have ran out/free trial time never contacted as i find this online to take to long and to hard to deal with  yet a paying costumer restricted by some weird fault i don't get this t

    the problems seems that the free trial what i am constantly paying for may have ran out/free trial time never contacted as i find this online to take to long and to hard to deal with  yet a paying costumer restricted by some weird fault i don't get this tried every thing how can i be billed and money taken for hired subscription  but end up with a "free trial" that cut me off having withdrawal as i live my life inside Photoshop 

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • Am suddenly getting error code 3250 when trying to download certain podcasts...not all, just some. How can I fix? Help.

    Am suddenly getting error code 3250 when trying to download certain podcasts...not all, just some. How can I fix? Help.

    I am getting the same error, and have been, since the last iTunes update.     Driving me crazy, as some podcasts download without issue, others won't download at all, and get the 3250 error code.

  • My iPad acting so weird tonight. When it shut down automatically because the battery has been drained. When I opened it, it creates some weird sounds like *swoosh* blahblah. It does make me feel nervous. Can someone help me? Does it already broken? :(

    My iPad acting so weird tonight. When it shut down automatically because the battery has been drained. When I opened it, it creates some weird sounds like *swoosh* blahblah. It does make me feel nervous. Can someone help me? Does it already broken?

    adetoye50 wrote:
    Dear Contacts Journal Support Team,
    FYI, this is a user to user support forum.  You are NOT addressing Apple here.
    Honestly, I doubt anyone is really going to take the time to read the novel you have written.

  • How could I set the proxy settings for just some URLs and not for all?

    Hello,
    I am using HttpURLConnection to establish a HTTP connection . The connection pass through a proxy, and it requires security.
    I know that I can set the proxy settings in the system properties, and this works perfect.
    But I don't want to set the proxy settings in the system properties, because this proxy settings will be for ALL the URLs, and I just want for a few URLs.
    How could I set the proxy settings for just some URLs and not for all?
    Thanks

    java.net.URL.openConnection(java.net.Proxy proxy)
    @since 1.5

  • Ideapad u300 screen not working - covered with some weird displays

    A few days when I turned on my laptop, I could not see the log in box since the screen was mostly covered by some weird displays. I can only see the down right corner of the screen where I can choose to shut down or restart. But I can see the whole screen normally if I connect the laptop with a external screen, like a TV screen with HDMI cable.  Does it mean that the laptop screen is broken and I need to get a replacement?

    Pharaoh wrote:
    Hi there,So I've had my laptop for a while now and the touch screen stopped working a long time ago as well. I figured that I would wait until maybe someone posted a solution somewhere but there hasn't been any posts about it (that I could find) and it's been a really long time so I figured I would ask. So here's the problem. Touch screen stopped working. No idea why. Quite suddenly the touch screen decided to no longer work. I checked the driver and the computer says its functioning properly. I tried to see if there was some kind of update that I should download, and my efforts yet again were in vain. Alas, I figured the more knowledgable might be able to guide me in the right direction so....any ideas? With thanks,MattHave you tried restoring to factory condition through the use of OKR?

Maybe you are looking for