Just started, got lost

I have just started my Ipad 2, update done, restarted and asked to continue, the screen stuck at enable location services, i clicked on next but no response...help please

If you are still in the activation process I don't know if this will work. See if you can quit the settings app and restart.
In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If you can't quit that way - force quit the settings app and restart.
Force quit the app by holding down on the sleep button until the red slider appears. Let go of the sleep button and then hold down on the home button until the app quits. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Similar Messages

HT1414 i connected my iphone 5 to my computer for the first time since i got it and it didnt give me any option and just started to restore it from my iphone 4s. ive now lost all my pictures that were on it. Is there a way i can get them back!

i connected my iphone 5 to my computer for the first time since i got it and it didnt give me any option and just started to restore it from my iphone 4s. ive now lost all my pictures that were on it. Is there a way i can get them back as i did not want it to restore my old phone anyway! i also had my hone set up to the cloud and it didnt work! PLEASE SOMEONE HELP ME

Can you try to use another computer?
If this does not work, visit an Apple Store or an Authorized Apple Service Provider next to your place, and show them the phone, maybe they can restore it before you'll have to get it serviced.
Did you try to put it in recovery mode?
iOS: Unable to update or restore

Trying to create a new movie. It tells me to name my movie, and the only event choice is the last movie I made. I don't want it there. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?

I'm trying to create a new movie. It tells me to name my movie, and the only event choice in the drop down menu is the last movie I made. IMovie Library is greyed out. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?

peggy818 wrote:
… I'm lost and I'm just starting. Not sure I like the new version. …
have a read in the Manual:
http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21

I can't select icloud backup on my iphone 5, i've got 4.5 gig of available storage and this just started 2 weeks ago

I can't select icloud backup on my iphone 5, i've got 4.5 gig of available storage and this just started 2 weeks ago, I've tried deleting a couple of apps, signing out, rebooting, all to no avail. The button stays grayed out and will not let me select. Any ideas on how to solve this?

Greetings vahbear,
After reviewing your post, it sounds like you are having trouble backing up to iCloud. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Get help backing up your device in iCloud - Apple Support
iCloud Backup alert messages - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

HT201365 I have forgotten my passcode for my iPad air and I have tried to erase it and start over, but I stuck!! I just got it and I'm just starting to activate it as a new iPad

I have forgotten my passcode for my iPad air and I have tried to erase it and start over, but I stuck!! I just got it and I'm just starting to activate it as a new iPad

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I have just started using the i phone 5 and have lost the Safari icon it was there now its gone ! any ideas guys

I have just started using the i phone 5 and have lost the Safari icon it was there now its gone ! any ideas guys

Hi
You might have swiped it into another icon by error if you were moving things around. You can find these easily as they have a black background.
Also, to see if you rae running an active Safari, double click on your bottom button and all of the active applicatiosn will come up. You can scroll through these to see if Safari is running (and not lost).
Cheers

I just recently got a new iphone and I hadn't connected it to my computer yet to sync it but i had downloaded ringtones before i synced it. I finally synced it and lost my ringtones. How do I get my ringtones back?

I just recently got the iPhone 4s and before I connected it to my computer to sync it I had downloaded some ringtones. Later that day I had synced my iphone and my ringtones have been deleted. And I dont want to have to but them again. Does anybody know how to get the ingontes back?

http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

My computer life is off a Dell, and yahoo. I had IE . Took on Mozilla. Somehown you got lost.

Somehow My Mozilla got lost. (Break in someone deleted it?) Please give me a clickable mozilla that will do a download. All I find is you, with 80 choices before I foind a "click here to download Mozilla'. Waiting 3 hours on a modem powered unit is bad enough. TG that IE is around and will let me talk to you about why I can't download you!
Tried requesting a new password, and you haven't delivered yet! What can I expect, some volunteers are better than others. Help to responses to : TYVM Ted
''[Personal information removed by moderator. Please read [[Forum rules and guidelines]], thanks.]''

Was Firefox uninstalled or did the icon just go missing for some reason?
You can check for Firefox using the Start menu, Run, type this and click OK/Go/Run (I can't remember XP very well):
firefox.exe
If that works, you could check your Recycle Bin for the missing icon. Or you create a fresh shortcut as follows:
Open this folder:
C:\Program Files\Mozilla Firefox\
right-click '''firefox.exe''' and choose Send To > Desktop (create shortcut)
Does that work?

I just recently got back from iraq and bought a iphone 4 like 4 months ago. I finally got my computer back and I hooked up my phone to the computer to sync and register my phone. I clicked on restore previous settings and now my phone has all my old stuf.

I just recently got back from Iraq like 4 months ago and I bought the new Iphone 4. I didnt have my computer with me because I was moving to a new duty station. I just got my computer yesterday and I hooked my iphone to the computer. Instead of hit set up as a new phone, I end up clicking on restore previous settings. Now all my new pictures, contact, videos, etc, are gone. I have my phone with old stuff from over a year ago. Is there a way for me to get my current stuff back. Did itunes save it somewhere and I dont know how to get it. Please help me out. Let me know if I can get it back or not.

If you restored your iPhone rather than synching it, you've lost all that data.

My iTunes just started like I've never used it before clearing all 7000 songs and playlists. My ipod said it's synced to a different iTunes?? HELP!!

Someone please help!! I just started my computer and opened iTunes and it looks like a brand new iTunes that's never been used before. All of my 7000 songs and all playlists are gone. When I tried to sync my iPod it says it's synced to a different iTunes. What do I do??

I have a similar problem - transferred from an older iPad to a newer one.
Once over the hurdle of the backup being encrypted with a password that was never set, the new iPad thinks it is synced with a library on another computer that will not be up to date (it was an old backup made on the original device).
Some of the backup information has not fully restored the new iPad to the same state as the old one - if I connect and sync to the computer with the older library, will this;
a) erase any data - i.e. should I not automatically sync?
b) will it recover the missing data - or is it 'lost'?
c) will it always require synching to this library - I intend for the device to be synched with another PC because it is faster and more convenient - this is the one where the backup and restore has been carried out rather than waiting for an iCloud sync.
The old iPad has already been reset - will this process have to be completed from scratch again? i.e. is there a way of divorcing the old iPad from it's old library then backing up and getting a full transfer.

HT1926 THE PROCEDURE ENTRY POINT QTCF_CFHTTPMESSAGESETHEADERFIELDVALUE could not be located in the dynamic link library QTCF,dll i keep getting this since i tried to upload the latest itunes ,something got lost while i was installing it cause my electri

eversince i tried to upgrade my electric turned off and something got lost from my origional itunes now i cant uninstall or reinstall and keep getting the message QTCF_CFHTTPmessagesetheaderfieldvalue could not be located in the dynamic link library QTCF,dll. its driving me nuts can anyone help PLEASE

Many thanks.
Origionally i was receiving that some msi or nsi was missing and to insert my itunes disc which ive never had i tried to uninstall and kept on getting could not uninstall due to the folder not being found
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Satellite Pro A10: after 3 years now just started shutting down

Hi
Can anyone help with this problem?
I've had my Sat Pro A10 about 3 years now and it's just started shutting down.
I've had the fan replaced and the unit cleaned out.
In the power options I've set the processor to minimum speed and the cooling to max.
Has anyone got any other suggestions.
Cheers

There is a good way to test if you have a CPU/RAM related problem. Just use Superprime or prime95 which is excellent for testing these two core components.
I am a heavy overclocker, so I need prime95 like my breath, and it works perfectly. It shows me when the CPU is exceeding a limit of overclocking (the same for the RAM) and if something is wrong with it.
If you then test it on your own machine, and you get an error, then you know that you probably have a hardware fault. But make sure that you quit all unneeded applications, which can disturb the test, so there were some reports, that applications cause error with these program.
I hope I could give you a new idea.
Greets

I have sent files several times now and when the recipient clicks the link to open. it says page cannot be found. This just started happening. what needs to be corrected?

In Adobe Send, I have sent files several times now and when the recipient clicks the link to open, it says page cannot be found. This just started happening. What needs to be corrected?

I can think of a couple of reasons for this behavior.
You inadvertently turned off the sharing for the files.
The link that the user is clicking on is incomplete; perhaps it got broken across lines in an email message. Are you sending Anonymous Links or Personalized Invitations? If the former, are you certain that you copied the entire link?
Some things to try.
Have the user send the link back to you so that you can test it. Does it work for you?
If you look at your Sent Files list, is the name in the Sent To column struck through (e.g., John Smith)? That would indicate that it has been unshared.
If you could get back to me with answers, perhaps we can get to the bottom of this.

Just started Livecycle yesterday. Need help with Javascripting

I'm new to scripting in general, but have figured out enough to be dangerous in Acrobat. Unfortunately, Acrobat no longer fulfills the need I have for dynamic forms and I have started trying to figure out Livecycle. Is the scripting in Livecycle THAT different from Acrobat that I need to relearn the scripting I figured out in Acrobat? Below is an example. It is in a table where I am trying to determine height of instrument (HI) from the elevation (Ele) and the difference between back (BS) and fore sights (FS). Any help is greatly appreciated. Thanks!
This is the script I used in Acrobat and it worked:
if(this.getField("BSRow2").value) {
var add = this.getField("BSRow2").value + this.getField("EleRow1").value
this.getField("HIRow2").value = add;
} else {
var height = this.getField("HIRow1").value
this.getField("HIRow2").value = height;
This is the script I used in Livecycle and it doesn't
if(this.getField(BS).value) {
var add = this.getField(BS).value + this.getField(Row1.Ele).value
this.getField(this).value = add;
} else {
var height = this.getField(Row1.HI).value
this.getField(this).value = height;

Hi i just started programming in java.
im running j2se 1.5.0 on windows xp
im on the subject of classes and objects.
here is my simple little code im trying to get to
compile
public class Newprog
     public static void main(String[] args)
          Greeter myObjectGreeter = new Greeter();
          myObjectGreeter.sayHello();
}now here are the error messages i get:
--------------------Configuration:
<Default>--------------------
C:\Program Files\Java\jre1.5.0_07\lib\Newprog.java:5:
cannot find symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new
Greeter();
^
s\Java\jre1.5.0_07\lib\Newprog.java:5: cannot find
symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new
Greeter();
^
get this error message alot....well actually just
about everytime..
I got it working just once using texteditor but have
no clue how i did it that time...now nomatter what i
try i get this error
I have my enviornmental variable set at
path = C:\Program Files\Java\jdk1.5.0_07\bin;
i am using JCreator Le
i downloaded exact codes from websites and they still
compile with this error..
if anybody with patience could tell me what i need to
do
would i have to configure java some more with
variables?
is my installation wrong?
do i have to save the work on a different file?
thanks in advance
Well here is all that goes
As you said you were pretty new
I suspect the following error done by most of the novice programmers in JAVA
Where is the Greeter class ??
ok may be you must have defined it somewhere else
Mostly the Java Compiler hasnt found out your Greeting class
Try locating that " Greeter.java"
or mention it in an other file located in the same folder as "Newprog.java"
public class Newprog
     public static void main(String[] args)
          Greeter myObjectGreeter = new Greeter();
          myObjectGreeter.sayHello();

Very n00b error....just started programming and need help?!?!

Hi i just started programming in java.
im running j2se 1.5.0 on windows xp
im on the subject of classes and objects.
here is my simple little code im trying to get to compile
public class Newprog
     public static void main(String[] args)
          Greeter myObjectGreeter = new Greeter();
          myObjectGreeter.sayHello();
}now here are the error messages i get:
--------------------Configuration: <Default>--------------------
C:\Program Files\Java\jre1.5.0_07\lib\Newprog.java:5: cannot find symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new Greeter();
^
C:\Program Files\Java\jre1.5.0_07\lib\Newprog.java:5: cannot find symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new Greeter();
^
2 errors
Process completed.
ok i get this error message alot....well actually just about everytime..
I got it working just once using texteditor but have no clue how i did it that time...now nomatter what i try i get this error
I have my enviornmental variable set at
path = C:\Program Files\Java\jdk1.5.0_07\bin;
i am using JCreator Le
i downloaded exact codes from websites and they still compile with this error..
if anybody with patience could tell me what i need to do
would i have to configure java some more with variables?
is my installation wrong?
do i have to save the work on a different file?
thanks in advance

Hi i just started programming in java.
im running j2se 1.5.0 on windows xp
im on the subject of classes and objects.
here is my simple little code im trying to get to
compile
public class Newprog
     public static void main(String[] args)
          Greeter myObjectGreeter = new Greeter();
          myObjectGreeter.sayHello();
}now here are the error messages i get:
--------------------Configuration:
<Default>--------------------
C:\Program Files\Java\jre1.5.0_07\lib\Newprog.java:5:
cannot find symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new
Greeter();
^
s\Java\jre1.5.0_07\lib\Newprog.java:5: cannot find
symbol
symbol : class Greeter
location: class Newprog
Greeter myObjectGreeter = new
Greeter();
^
get this error message alot....well actually just
about everytime..
I got it working just once using texteditor but have
no clue how i did it that time...now nomatter what i
try i get this error
I have my enviornmental variable set at
path = C:\Program Files\Java\jdk1.5.0_07\bin;
i am using JCreator Le
i downloaded exact codes from websites and they still
compile with this error..
if anybody with patience could tell me what i need to
do
would i have to configure java some more with
variables?
is my installation wrong?
do i have to save the work on a different file?
thanks in advance
Well here is all that goes
As you said you were pretty new
I suspect the following error done by most of the novice programmers in JAVA
Where is the Greeter class ??
ok may be you must have defined it somewhere else
Mostly the Java Compiler hasnt found out your Greeting class
Try locating that " Greeter.java"
or mention it in an other file located in the same folder as "Newprog.java"
public class Newprog
     public static void main(String[] args)
          Greeter myObjectGreeter = new Greeter();
          myObjectGreeter.sayHello();

Just started, got lost

Similar Messages

Maybe you are looking for