Just started happening: Can no longer drag clips into Audio 1

Hi- I just encountered a problem. When I drag a clip from the source monitor, the audio automatically splits to Audio7 & 8. Can someone explain why this is happening? Is this a problem and if so, how do I fix it?

Thanks for the quick reply...
Does it really matter if the audio is not in the Audio 1 line? I'm trying to get myself to stop worrying about the non important stuff and finish the project.
My ADD is horrible, things like this distract me! The final outcome is a video testimonial page for a client... so I'm not looking for 5.1 audio.
Is this a big deal?
Untitled from Chris Ratchford on Vimeo.

Similar Messages

I can no longer drag songs into my playlists.

I can no longer drag songs into my playlists. I drag them over and nothing happens.

I have restarted several times and I still can't drag and drop. My only option is to control click and then it gives me a drop down menu of options including putting into a playlist. I think this alternative *****! Drag and drop was a whole lot easier

Why can't I drag clips into the timeline in Premiere Pro CS6?

hi,
I have clips in my bin and trying to drag them into the timeline since the newest update and I cannot. Anyone having this issue?
Thanks,
Renee

Sorry if I am saying something obvious, but do you have a project timeline open?
I suggest you look at a good video tutorial to help you get started with FCP X.
One of the good ones (and free, too) is at Izzy Video: http://www.izzyvideo.com/final-cut-pro-x-tutorial/

Can no longer pull clip into timeline from Viewer??

I no longer have the ability to drag a clip, or sub clip if I've chosen in and out points, into the timeline from the Viewer.
When I attempt to do this the clip moves as if I'm repositioning the clip within the Viewer window, but does not move to the timeline.....thoughts??
Thnx,
Bh

Either the video track that you are trying to edit on is locked (dark grey diagonal lines thru the track)
or the source and destination patch buttons are disconnected.
The Illustration below shows the v1 source correctly connected to the V1 destination:

Why can I no longer drag clips?

I can no longer drag clips from the viewer to the canvas or timeline. When I the clip seems to disappear behind the canvas or timeline. "Show Overlay" is checked. The Edit Overlay box, which used to appear in the canvas, no longer appears. I use Final Cut Pro 7. I've edited a feature with no problem, so I'm assuming something has gotten switched off? Thanks.

Have you tried trashing your preferences? That is the usual first step when FCP begins to act in unexpected ways.
You can download Preference Manager (free) from Digital Rebellion and it will do it for you:
http://www.digitalrebellion.com/prefman/
Your preferences will be reset to default settings the next time you launch FCP.
If you want to do it all manually:
Final Cut Pro 7: Troubleshooting Basics - Apple Support
MtD

Can No Longer Drag JPG files From Finder Directly Into .fla Stage?

For the past six months I have been following a manual process to convert JPG files (exported from InDesign) into SWF files for display advertising assets.
Using pre-built FLA files as templates (configured with clicktags):
Open FLA templates (3 separate files for 3 IAB ad sizes)
Drag JPG from Finder directly into stage of FLA file, aligned to
Publish to output folder for renaming
Today, for no apparent reason, I can no longer drag anything into the stage of any FLA file. Not just the pre-built templates. Nothing will drag & drop into an FLA stage.
What I have tried:
Restarted Mac
Reset Flash preferences
What I know I can still do:
Drag files from Finder into the Library, and drag into FLA stage from there
"File > Import to Stage..."
This works but because of my naming convention it prompts to import them all each time because Flash sees the sequence
This is not another step I am willing to contend with for my manual workflow
Me and my creative team need to process hundreds of assets like this each week, so I'm very anxious to discover why functionality that was working, suddenly stopped.
Running:
MacBookPro Retina OS X 10.8.5
Flash CS6 v. 12.0.2.529

just want to add my annoyance to the pile here. I can't see any logic behind removing the drag and drop function, especially when adding a new folder is now a multi-step process that is far from obvious. to start a new playlist with local folder content you now need to:enter settingsclick into advanced settings (basically all settings now seem to be "advanced"?)manually find and add the foldergo through the adventure of finding the files in your library.
-- because they may or may not be listed under "local files" - you won't know because Ctrl+F is also removed. so you have to remember/know what the album you added is called and search for that. if you have a mixed bag of file names from various albums, you're basically shafted; there's no way to find them all with a single search.then you can add them to playlisteta: but wait! there's more! if you have more than 15 files? you're **bleep** out of luck, because the search will only display the first 15 hits among your local files, and then show you spotify library tracks.I can't help but feel as though spotify is doing everything they can to stop us using spotify to listen to local files, as bugs that make it more or less impossible persist through multiple versions - and now features that seem to me to be basic functionality are being removed?mega minus points from someone who's been using spotify since 2008.

I can no longer drag and drop pages into my bookmarks toolbar in the new firefox

I uninstalled firefox to try google crome. Now i have uninstalled crome, and gone back to firefox. After restarted my computer i put the bookmark toolbar up but i can no longer drag sites into the bar. When i do it opens them in a whole new window.
When i used this before i would have saved tabs in my bookmarks for easy use,
Is this a bug or am i doing somthing wrong
Thanks
Mandy

for me the problem was caused by the Torbutton add-on.
I have read that there are about 5 or 6 other add-ons that also inhibit Drag and Drop functionality, not just the Torbutton add-on. The list is somewhere in the main Firefox support section (but it's tough to find the answer there twice).
The generic add-on troubleshooting page is at:
https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes#w_disable-all-extensions

TS3276 I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone

I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?

Thank you for heading me in the right direction. I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information). I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)?? In the Advanced box I clicked on "Use custom port: 465" and checked "Use Secure Sockets Layer." Authentication: Password; I have correct User Name and Password put in. After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there.
What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message: "Cannot send message using the server smtp.att.yahoo.com (etc.). The SMTP server doesn't support TLS(SSL) on port 587. Verify your account settings and try again." That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails. I guess my next step is to contact my email service provider, AT&T, and see if they can help me. Thanks, again, for taking the time to respond and for giving me your input! Much appreciated!

Every single website, or link within a website page is being added to my location bar/address bar drop down menu. How can I stop this? This just started happening.

Every single website url address, or url address within a website page is being added to my location bar/address bar drop down menu.
I don't want everything added or saved in the location bar. Only urls that I used a lot used to be saved there but now every single url (and url within a url)I visit is being added to it.
How can I stop this? This just started happening.
I'm sure it's a simple browser setting but I've checked and nothing gives an option to control this.
Firefox 3.0.17
Windows XP
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.17) Gecko/2009122116 Firefox/3.0.17

A possibility is to open the links via the right-click context menu or a middle-click in a new tab to make sure that Firefox sees them as regular links.

My hard drive desktop suddenly will no longer hold or maintain the icons in place when I shut down and restart. The icons all change positions, alphabetically. Just started happening. Any thoughts?

My hard drive desktop suddenly will no longer hold or maintain the icons in place when I shut down and restart. The icons all change positions, alphabetically. Just started happening. I prefer the icons to a list format. Concerned this might be a symptom of a larger problem. Any thoughts?
revmandan

It's normal for the icons at the top level of the startup disk to revert to the same arrangement every time the Finder is relaunched. If it's important to you to arrange those icons in a persistent way, proceed as follows.
Back up all data.
Open the Info window on the startup disk (labeled "Macintosh HD" unless you gave it another name.) Click the lock icon in the lower right corner of the dialog and authenticate.
In the Sharing & Permissions section, click the plus-sign button to add an entry to the access list. Give yourself "Read and Write" access. This will be a temporary change. Leave the dialog open.
Open the Finder window and arrange the icons as you wish, then close the window.
In the Info dialog, use the minus-sign button to delete the entry you just added to the access list. Don't change anything else. When you're done, it should be the same as when you started. Close the Info dialog.

While browsing in Releaselog, I can't open a new Tab from a link(Ctrl left button). It opens in the same Tab and has just started happening

While browsing in Releaselog, I can't open a new Tab from a link(Ctrl left button). It opens in the same Tab and has just started happening this week. All other websites are ok.

You're welcome

I can not access ANY webpage...it is giving me a 403 Forbidden message saying I do not have permission to search on this server, yet, I have been using Firefox for months...this just started happening today?

This message just started happening...I use IE as well and have no problems.
I prefer Firefox and I hope you can resolve this.

Who is your Internet Service Provider...?
Do you have any computer which is able to go online wirelessly...?
Have you forwarded any ports on the router...?
Try to adjust the wireless settings on the router and check...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Wireless tab,Change the SSIS(Network Name) to some unique name.Change the Channel Width to 20MHz only and Channel to 11,click on save settings.Under the Wireless Security subtab,Change the Security to WEP and type any ten digit number in key1 as the network security key,click on save settings..Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Also,for the gaming system,check this link.

I can't open any of my Groups pages on Facebook, just my Newsfeed,mobile using Safari (on my Ipad). But they open using Chrome. This just started happening, as it was working fine for months.

I can't open any of my Groups pages on Facebook, just my Newsfeed,mobile using Safari (on my Ipad). But they open using Chrome. This just started happening, as it was working fine for months.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that didn't help, tap Settings > General > Reset > Reset All Setting
Restart your iPad.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
No data is lost due to a rest

My iPhone stopped making sounds - can't hear the music on the speaker, no click sounds when I type, nothing. Just started happening today, was fine earlier. any ideas?

my iPhone stopped making sounds - can't hear the music on the speaker, no click sounds when I type, nothing. Just started happening today, was fine earlier. any ideas?

Hey Uttej Shas!
I have an article fro you that can help you troubleshoot this issue with your iOS device:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

When press Firefox, User account control asks if Firefox can make changes to computer. I have windows 7.It has only just started happening.

Happens when I want to go to internet. I have Mozilla 5.0. It has only just started happening.

Check that you do not run Firefox as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected.
You also need to check the Properties of the firefox.exe program in the Firefox program directory.

Just started happening: Can no longer drag clips into Audio 1

Similar Messages

Maybe you are looking for