Just started. iphoto will not recognize iphone as a camera

frustrated here. All of a sudden, IPhoto will not recognize my iPhone as a camera and therefore will not upload photos taken on the phone. No settings have been changed. Not sure what to do here.

Got any photos in your camera roll that were emailed to you or saved through safari? If so, try deleting them or emailing them to yourself & then deleting them from your camera roll. See if iphoto will then see your phone.

Similar Messages

  • IMAC, iMovie, iPhoto will not recognize iPhone, won't charge either

    Hello All:
    I just took some video with my iPhoto 3GS, and connected my iPhone to my iMac only to find that:
    iPhone is not recognized by either iTunes, iPhoto or iMovie and what's more it won't charge. That is, my iMAC can't detect iPhone as a connected device. I went to the Apple support page and ran through all of the troubleshooting steps (except clean uninstall and reinstall of iTunes.)
    As a control, I connected iPhone to my MacBook and all fine: it charges, iTunes recognizes it as a connected device, as do iPhoto and iMovie.
    This is a new thing, as when I got the iPhone a month or so ago, I used my iMac to initialize it.
    All software up to date, all USB ports on iMAC work, cable is fine.
    The ONLY new software I have loaded since I last used iPhone and iMAC together is Snapz Pro X (trial), so I did a thorough (and I mean thorough) uninstall of that...no change.
    I live in Spain, so my closest Genius Bar is London, and I'm not flying up with a 24"iMAC under my arm!
    Any help?
    Steve

    Isn't it always the last place you look for something is where you'll find it?
    Last night when I made the post I was just too tired to delete iTunes and go through the Libraries to scrub out the files.
    This morning, with a Cappuccino I did it.
    Reloaded a fresh copy of iTunes...all better now.
    Perhaps Apple support on this topic should change "on rare occasions you will need to reinstall iTunes" to "you will need to reinstall".
    Anyway, better now.
    BTW: the reason all this happened is because I wanted to transfer iPhone videos to my Mac to work on them in iMovie. iMovie won't recognise the iPhone, but, Image Capture does!! Just offloaded the 10 vids from iPhone in .mov format. I'm good to go.
    Merry Christmas to all, and to all a good night!

  • My iphoto will not recognize my iPhone 5c

    My iphoto will not recognize my iPhone 5c, therefore I can't import any of my pictures.
    I read that it could be the cable do I went out and bought another but it is still not working?
    Neither itunes nor iphoto open when I plug in my phone, however when I open up itunes manually, it recognizes it. Any suggestions?

    Launch iTunes, then connect your iPhone to USB. The iPhone will prompt you, if you trust this computer. Confirm that you trust it.
    Then try again to import to Photos.
    If "trust" was not the reason, try a different USB port on your computer.

  • Windows 7 and itunes 10.4 will not recognize iphone 4

    windows 7 and itunes 10.4 will not recognize iphone 4.  iphone does not show up in device list in iTunes

    Found my answer by sifting through all itunes questions.  (I tried earlier, but apparently chose the wrong key words.  In my successful search I just searched through everything itunes related.) There was a posting where someone indicated they could not open alternative libraries using the option key method, precisely my situation.  They stated that they solved the problem by appending a ".itl" at the end of the library file.  I tried this myself and sure enough, it worked.  Hopefully it will also work for all others who are suffering from this scenario.

  • ITunes 11.1.0.126 (Win7/64) will not recognize iPhone 5 (neither iOS 6 nor iOS 7)

    iTunes 11.1.0.126 (Win7/64) will not recognize iPhone 5 (neither iOS 6 nor iOS 7).
    Windows can see the USB-connected iPhone.

    With iTunes 10 and iOS 6 it was OK

  • Itunes 10.5 will not recognize iphone

    Just updated to 10.5 itunes - now it will not recognize my iphone 4.3.5.  Suggestions?

    I am having this problem, but on my Macbook Pro running OS X 10.8.2 and iTunes 10.7.  Both my iPhone 5 and my wifes iPhone 5 are not recognized in iTunes.  Both our old iPhone 4S's come up just fine.  Any other work arounds?
    I have reinstalled iTunes, restarted both phones, and Mac.  Still not recognizable.
    EDIT: 
    Just tried the other cable from my iPhone 5 box, and it works fine.  I then tried plugging the faulty cable straight into the wall, and it gets no charge.  Faulty cable.

  • ITunes 11.1.4 will not recognize iPhone, iPad after Dell BIOS update

    I suspect the problems everyone is having are related to the BIOS.  I am running a Dell XPS i7-3770 CPU @ 3.40 GHz 3.4 GHz with 24 GB RAM, 64 bit OS x64 based processor.  OS is Windows 8.1
    I just updated my BIOS as suggested by Dell.  Now iTunes 11.1.4 will not recognize my iPhone or iPad.
    My computer accesses the iPhone or iPad, but iTunes does not recognize them.
    This was not a problem prior to updating BIOS.
    Is there a fix or patch?
    I have to sync my devices for work.
    Please no baby-steps replies.  Have tried everything including removing devices from device manager and reconnecting to force driver update and try to force iTunes recognition.  None of that works.
    Thanks!

    Here is the fix from Waldo-E3 elsewhere in this forum.
    Like I said, no baby steps answers please!
    Kudos to Waldo-E3!
      RESOLVED...
    Found these steps posted elsewhere by another and the solution worked for me...
    1. Go to Windows 8.1 Control Panel. 
    2. Go to Hardware and Sound; Devices and Printers; Unspecified (look for Apple Mobile Device USB Driver) 
    3. Right-click, then select properties on the menu list. 
    4. Select the "Hardware" tab at the top  When the properties dialog box opens, once more select properties on the lower right hand button. 
    5. Under the "Driver" tab menu, the update driver button will be grey and unselectable here. So you need to select and click "Change Settings" button located near the lower left corner. 
    6. Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button. 
    7. Select "Update Driver". 
    8. Select and click "Browse my computer for driver software". 
    9. For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.   
    10. Click Next, and let the driver re-install. 
    11. iTunes  11.1.4.62 should open automatically if your iphone is connected already

  • TS3988 I have no trouble with email but IPhoto will not recognize my server when I try to send a photo to a friend. Anyone else have this probelm ...a solution??? N

    I can email but IPhoto does not recognize my server to enable me to send email photos. Any advice?  N

    I've been having this problem too, but here's the catch: originally it was only with my dad, and only sometimes.  Now it's dad and husband, every time!  Pix go through, via imessage, to everyone else, and they go through to dad/husband if I "send as text" after it fails. 
    And the other annoying thing- the blue bar will run all the way, and it will say "delivered".  So I close out of imessage. When I reopen it again, the "delivered" has changed to "not delivered" with the red exclamation point.  I just googled "imessage not sending photos" and founds TONS of people with the same problem, but no solutions.  (I have rebooted phone, reset network settings, with no luck.  I even had to backup/delete/restore my whole phone the other day for a different reason, and hoped that would fix it, but now it won't send to my dad OR my husband (who is on not just the same carrier, but the same family plan as me)

  • PC will not recognize iphone

    My PC with windows XP will not recognize my iphone. I was able to get it to backup up the phone by installing the latest iOS. Not sure how I managed that. For a while the pc thought thte iphone was a camera. The iphone does not show up in my computer. Does anybody know how to fix this?

    Update itunes

  • I have tried everything but mac book will not recognize iphone

    i have tried everythiong but mymacbook will not recognize my iphone4s

    Read here.
    http://www.apple.com/support/iphone/assistant/itunes/

  • HT1688 itunes will not recognize iphone

    got message to unistall and reinstall 64-bit itunes. I have done this several times and Itunes will not recognize my iphone. I have tried this several times over the past few weeks and same results. highly annoyed and ready to unistall permanantly. Computer is windows.

    See:
    iPhone not recognized in iTunes for Mac
    iPhone not recognized in iTunes for Windows

  • IMovie 11 will not recognize panasonic hdc-sd90 camera

    I have just shot my first clip with this video camera and am trying to import it into imovie 11 but imovie will not recognize the camera even though the video camera shows up in system profiler ? any suggstions please.

    One cable, or an adapter plug for the cable? I assume the former.
    If the Sony works, you can capture using that most likely.
    About this Mac>More Info
    You should see the camera identified here:
    If it's not seen by the OS it can't be seen by iMovie, regardless of the version you're using.

  • IMac 10.6.8 will not recognize iPhone v.4.12.09 with iOS 7.1.1

    I cannot get photos from my iPhone version 4.12.09 with iOS 7.1.1 to appear on the desktop of my iMac running 10.6.8.
    It will not open iPhoto nor will preview recognize the iPhone as being connected. No way to get newly taken photos to iPhoto.

    Have you just tried opening iPhoto manually to see if your iPhone will show up that way?
    Have you tried shutting down your Mac and doing a PRAM reset?
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone.

  • Windows 8 will not recognize iPhone 5 USB

    I just bought a new computer and went to setup itunes, My ipad synced well but iphone 5 will not get recognized in windows 8, can anyone who has overcame this help please Thank you all

    Check especially the Apple Mobile Device Service sections here:
    iOS: Device not recognized in iTunes for Windows

  • IPhoto does not recognize iPhone

    I need help with iPhoto and my albums on my iPhone 4. iPhoto does not seem to recognzie the iPhone.

    Just solved this. I had to turn on PhotoStream. I turned it on, in both iPhotos and my iPhone 4. Now my iPhotos recognized my iPhone 4.

Maybe you are looking for

  • Delta  reocrds are not getting extracted . Problem with delta Quaue

    Hello friends . Could you please help me in this scenario ? It’s related to delta load from application 12 ,  - 2LIS_12_VCITM. Some how data is not getting transferred from LBWQ to RSA7 . There are more than 200000 entries in LBWQ , but the job is no

  • Security Question Printing.

    For security question i need trace in BW if a user printing a web report. For this reason i must disable printing function of Internet Explorer. It is possible print a report by-pass the print function of Internet Explorer? I cannot use exporting in

  • Work around for unsupported OS?

    I'm rcving a message that InDesign does not support the OS that I'm using, therefore I can't download or use it. Is there a work-around for this problem?

  • Couldn't copy large amount of data from enterprise DB to Oracle 10g

    Hi, I am using i-batis to copy data from enterprise DB to oracle and viceversa. The datatype of a field on EDB is 'text' and the datatype on oracle is 'SYS.XMLTYPE' i am binding these to a java string property in a POJO to bind values. I could succes

  • Set Default values for Value mapping

    Hi All, I have some specific value set for which I have used a Value mapping into Message Mapping . My problem is I want to set a default value for the target value and I dont know how to set it in Value mapping .. And also if you can suggest me how