Just started up iPhone 4S and done something wrong, I have speaking on all buttons and apps, I would like to switch it off but the phone will not scroll?? Please I'm going mad!!
Just started up iPhone 4S and done something wrong, I have speaking on all buttons and apps, I would like to switch it off but the phone will not scroll?? Please I'm going mad!!
triple click the home button. Then you can go into accessability options in settings and turn off that feature
Similar Messages
-
The sleep/wake function would not show in general to turn it on. I have a Targus case but the function will not work? The place it should be their is. Auto lock, Password lock, and Restrictions
Keirosform wrote:
The sleep/wake function would not show in general to turn it on.
Ther is no "sleep/wake" setting in Settings > General.
Auto lock, Password lock, and Restrictions
Yes, these are the only three settings..
I have a Targus case but the function will not work?
What function? It won't go to sleep?
Press the Power button on top. Does it sleep? -
Iphone has a message on it that said iphone is disable connect to itune. i try but it said that you must unlock your phone. but the iphone will not let me bring up the keypad so i can put the code in to unlock it, it has the message iphone disable connect to itune. what can i do?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery... -
My new Iphone 6 will pair with Range Rover but the phone will not work with bluetooth
Does anyone know if Apple is resolving this issue? The Range Rover service people don't know how to resolve this.
I Have the same issue. my phone worked until I updated to v8 software on iphone 5. Now it won't pick up contacts and I cannot make a hands free call while driving. My car dealer Taggerts of Motherwell have said the Range Rover software is not up to date and the phone won't work properly until it is.
-
On my time capsule I would like to switch wifi off during the evening and night. Is that possible?
Hi there,
Is it possible to switch wifi of during a block of hours each day without accessing the time capsule every day?
I want my kids to stay of-line at night! :-)
Thanks in advance for your help.
Cheers, LeonThere is no off switch but you can setup parental control which does nothing more than turn off wireless between whatever hours you set for the particular client/s.
See under access control of wireless in v5 utility and under Network, Enable Access Control in v6 utility..
Also search.. there are lots of posts about the right way to setup "Timed Access Control"
http://support.apple.com/kb/PH5091 -
Can't restore my new iphone 5 because i was told to update it to ios7 before backing up my info on it and now I just get error code 3 on restoring it
You should restore from the back up so you can get the info back on your device. Then, what you can do is import those pictures to your computer.
At that point, you'll want to restore again as new possibly, then once your phone is as new, use iTunes to sync those picture from your computer back to your phone.
As far as contacts, do you know if those were ever backed up to iCloud? If so, all you should need to do is sign in with you iCloud account. -
Iphone 4s has power but the phone will not wake up is there a easy way to get the os to wake up?
i have an I phone 4s i can see that its trying to power up, but the operating system can't engage.
Q; how do I restart operating system?Solution depends on EXACTLY what you are seeing. Tell us a Story so we can experience in our mind's eye what you are experiencing in real life. a Short Story will likely do. - ÇÇÇ
-
Trying to activate my 3GS and the phone will not recognise the sim and will not activate
Help Please
I have changed my call plan with my service provider from contract to PAYG and have just tried to upgrade my 3Gs to IOS 5.0.1. I have purchase a iPhone 4 and was using the 3Gs as back up.
I set the phone to factory restore as it was being sluggish and I felt a restore would be the best option. The restore went ahead but the phone will not accept that I have a valid sim in the phone and will not activate stating that the servers cannot activate the phone.
The sim is the new PAYG sim given to me by O2 and I had even arranged for the number to be transferred to the PAYG sim. I am at a loss to understand what has happened as the sim will work fine in an old 8gb Iphone 2g and other mobiles. I have not kept the old contract sim so I am unable to insert that to see if that was the problem.
How can I get my 3Gs acitated and working? Do I need to contact O2 or take the phone to an Apple store. Any advice would be appreciated.You need a valid micro-sim. to acivate.
IOS: Resolving iPhone activation messages
http://support.apple.com/kb/TS4242 -
While updating the iPhone 5 software from 6.1.3 to 6.1.4, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in. Using Windows 7 and phone not recognised by computer, let alone by iTunes.
Any suggestions? Happy to take it off to the the Apple genius people but would prefer to get it running myself.
Regards.Try this
iOS: Device not recognized in iTunes for Windows -
i have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.
YOu'll have to restore, nothing else you can do.
If you have an older backup you can restore to that. -
Please help.
iCloud on my iPhone still has my old email in it with no option to update it. I have no access to the old email. I updated my email and password online via my macbook, but my phone will not recognize either! It keeps popping up a screen for me to enter my password, but it says it's incorrect.
How do I fix this on my phone?????
I can't fix it online because my iCloud online (although working) does not recognize either of my devices because they need updated….which I'm not able to do due to storage issues.
I just want my phone to recognize the new email and password!!
I have no idea what I'm doing but I'm about to throw this phone across the room.
thanks!Welcome to the Apple community.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and tested on: 2014/05/23
You should still be able to log into an old email account, even if you haven't used it for some time, very few providers delete email accounts. -
I can not back up my iPhone. It says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
when trying to sync my iPhone i get a message saying : iTunes can't sync apps to iPhone because the apps installed on the phone could not be determine. what is going on?
I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps. I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps. I updated the apps via iTunes and then synced again without an issue.
iPhone 4S / OSX 10.6.8 / iTunes 10.5.1 -
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
My music will not play on my iPhone 5. It has the upgrade as well as my iTunes on my macbook. But the music will not sync to my iPhone and all music is in my library. What do I need to do?
An exclamation mark means that it doesn't know where you moved the music to. To fix this, click on the exclamation point and when it asks you to browse to the location where you moved it to, use the normal commands to go up and down folders in your external drive until you find the song. Repeat as necessary.
Maybe you are looking for
-
Error MSB3073: The command exited with code -1
I am getting this error while deploying the biztalk project from visual studio using Deployment Framework for Biztalk (BTDF). Please guide me what needs to be done. Here's the code :- <?xml version="1.0" encoding="utf-8"?> <!-- Deployment Framework f
-
Printer name with non-ASCII character
Is it possible to name a printer using ISO-8859-1 (or WINLATIN1) characters? Our business system has logical printer names defined, sometimes using Norwegian (and Danish) letters (AE-lig, O-slash and A-ring), which we would like to map to the correct
-
Addition of Start & end date fields in the View 'My team's open leads' .
Dear all, I want to add Lead Sart date & Expected End date in the personalize list of view 'My team's open Leads' in the Overview page of Lead management I tried it by changing the field name in PDVField as
-
I have just today started to use Goggles Mapping. Is there anyone who can get me started with this App? I am using a I-pad. Thank you,
-
Refnum out: where to find it on the function/control palette?
Refer pic. Refnum out looks like a dummy variable to paste to the shift register so the register would not be empty, am I right? But I searched on the function/control palette, I can't find refnum out, where is it? Solved! Go to Solution. Attachments