Just subscribed to InDesign CSS - problem: how can I open old Pagemaker 5 and 6 Files?

Files are not being recognized. Have read there might be a download of past PM apps available. Any confirmations?

Furthermore, consider this as your last wake up call!!!!
Pagemaker development and support was discontinued at least a decade ago.
At this point you should go through and convert any PageMaker content you think you will ever need to access since at some point, even InDesign 8 (CS6) won't run on future operating systems versions.
- Dov

Similar Messages

How can I open old Apple works files

I have some old files written in AppleWorks. How can I convert them?

Kathy Platt wrote:
I have some old files written in AppleWorks. How can I convert them?
Here is a post I recently assembled for a similar question
Appleworks 6 running in Snow Leopard Server installed into Parallels for use on newer Macs:
[click on image to enlarge]
In the interim, study these two excellent articles:
Abandoning Appleworks, by Roger Wilnut; and
http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html
Appleworks for the Modern Day, a Migration Tip by a brody
https://discussions.apple.com/docs/DOC-2522
Also: Installing Snow Leopard Server into Parallels for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

HT4798 I'm seeing the above problem, how can i open "Users&Groups" if i can't login?

I'm seeing the above problem, how can i open "Users&Groups" if i can't login?

If the system is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)... How can I open old Freehand files on this new Mac? Can I still open and work in Freehand on this new Mac?

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
How can I open old Freehand files on this new Mac?
Can I still open and work in Freehand on this new Mac?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

How can i open a downloaded mp4 file that is zipped? Witch will not open. And, Convert that mp4 to play on my iMac with Maverick osx ? I there an app or apps i need to buy ?

how can i open a downloaded mp4 file that is zipped? Witch will not open. And, Convert that mp4 to play on my iMac with Maverick osx ? I there an app or apps i need to buy ?

You should be able to open the zipped file by double clicking on it.
http://www.videolan.org/vlc/index.html
This link is for a VLC Player it can play just about everything.
Cheers
Don

How can I explore the folders and files on my phon...

How can I explore the folders and files on my phone from my phone (lumia 920)?

the file system including all the data pertaining to that partition is closed on windowsphone8, unlike that of Symbian.
the only part you will be able to see is what you would see in this post here: /t5/Nokia-Lumia/Transfer-file-for-920/m-p/1605954#M24335
the rest is locked unless you have developer access, and even then not much as you would just use the SDK to make your applications.

How can i open Nikon D610 RAW files in Element 12 ?

How can i open Nikon D610 RAW files in Element 12 ?

You need the ACR 8.3 plug-in to open D610 NEF files.
Check what Help / About Plug-ins / Camera Raw reports for the version number.
If it is something less than 8.3, update to the ACR 8.3 plug-in using Help / Updates from the Editor. If that says there are no updates, then uninstall and re-install and try again.
If it is already ACR 8.3 then the files are likely corrupted by using an obsolete version of Nikon Transfer or ViewNX with them.
You can fix that corruption using a utility from the following webpage, where 14-bits is likely what you’d want to specify, and only use Nikon utilities that are as new as your camera:
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

How can I open MWS (Maple) and WXM (wxMaxima) files directly by click on their links, without necessity to save them on my computer? Thanks in advance.

How can I open MWS (Maple) and WXM (wxMaxima) files directly by click on their links, without necessity to save them on my computer? The links are present at a htm file.
In the Internet Explorer it works. Mozilla isn't even able to recognize these applications to enable me to select a regime of their handling.

hello TurZ, please set media.windows-media-foundation.enabled back to its default value and turn '''media.play-stand-alone''' to '''false '''instead.

How can I open both UDP and TCP ports

Hi,
How can i open both tcp and UDP ports for an IP in Cisco ASA?
Regards
Ejaz

Are you referring to port opening in Cisco ASA to permit certain traffic? I believe the following document should help.
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_overview.html
Adding a Standard Access List
hostname(config)# access-list access_list_name standard {deny | permit} {any | ip_address mask}
Example:
hostname(config)# access-list OSPF standard permit 192.168.1.0 255.255.255.0
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_standard.html
Adding an Extended Access List
access-list access_list_name [line line_number] [extended] {deny | permit} protocol source_address mask [operator port] dest_address mask [operator port | icmp_type] [inactive]
Example:
hostname(config)# access-list ACL_IN extended permit ip any any
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_extended.html
Hope this will help.

HT204382 hello somebody, how can I open/listen to yousendit file on mac? thnx

hey guys how do I open/listen to yousendit file on mac? Thnx

To me you have left out the critical information on how you are connected to this other Mac.
Presumably if you can see the other Mac's drive you can start your iTunes with the option/alt key held down and guide it to the iTunes Library.itl file on the other computer. That is starting from its library, not just using its media. You do not do anything with preferences, Do not touch those. Many people make the mistake of thinking that is how you use media in another location. You can point all you want but iTunes will not look there. It will, though, start storing all your files you add to the iTunes library in that other location from that point on which will result in a fine organizational mess.

How can i open the archived pst file in my Mac Air

How can i open the Archived outlook pst file in my Mac air, i want to access my old outlook mails.

System.setProperty("java.security.policy", "system.policy");Is this a new feature in JDK1.4? I don't see it in
the documentation for JDK1.3.1 that I'm currently
using.Look more closely. There is indeed a setProperty(String, String) in
http://java.sun.com/j2se/1.3/docs/api/java/lang/System.html
"Since 1.2"
- Marcus

How can i open, edit, view .xfdl files

I am trying to work on military files that are sent from Windows based products and are formatted as .xfdl. How can I open, print or edit as neccessary?

With the free Reader if they are not print protected. With Acrobat otherwise.

How can I open encrypted Microsoft access files on a mac?

How can I open an encryted Microsoft access file on an iMac?

As Office for Mac doesn't include Access, I'm not at all sure you can.
You could try Open Office, NeoOffice or Libre Office (all free, open source) and see if their database applications can do it.

How can i delete old RMAN backup files

Hi All
We have configured RMAN backup for one of our clients PROD instance[10.2.0.3] in 2010 Dec.
Now my doubt is how can i delte old backup files of Dec and January, only this two months backup files only i need to delte.
kindly suggest me.
The parameters are :
CONFIGURE RETENTION POLICY TO NONE;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/ebiz/backup/PROD-%F';
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/ebiz/backup/PROD-%U';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/ebiz/oracle/proddb/10.2.0/dbs/snapcf_PROD.f'; # default
Regards
Shaik

Hello,
You can use this :
DELETE BACKUP COMPLETED BEFORE TO_DATE('01/31/2011 00:00:00','MM/DD/YY HH24:MI:SS');Regards,
Sylvie

Just subscribed to InDesign CSS - problem: how can I open old Pagemaker 5 and 6 Files?

Similar Messages

Maybe you are looking for