Just switched from Qwest DSL to CableOne cable internet and now my mac won't connect to the internet.

I've spent 2 hours on the phone with CableOne and they can't figure our why my MacPro isn't connecting to the internet through their Arris modem. I can connect to my network and see all my computers... so the ethernet port is working but the internet won't connect. I've tried Safari and Firefox browsers. My PC connects using the same ethernet cord with no problems. I've also tried connecting the computer directly to the modem with no results. And the ethernet port says it's connected and gives me an ip address. I'm out of ideas at this point. Any suggestions?

Similar Messages

  • My premiere project file size just went from 190MB to 5.61GB... and now it won't open! Anyone know how this happened?

    My premiere project file size just went from 190MB to 5.61GB... and now it won't open! Anyone know how this happened? Or how to prevent it from happening again? Thankfully I saved a backup project of the 190MB file size.

    warp stabiliser?

  • I just upgraded to ITunes version  10.6.0.40 and now I am having trouble connecting to my Airport Express.  I get error message 15000.  I am connecting with an ethernet cable so it is not a wireless problem.  Any ideas?

    I just upgraded to iTunes version 10.6.0.40 and now I am having problems connecting to my Airport Express and I get an error message 15000.  Does anyone know what that means?  I am using an ethernet cable so it is not a wireless problem.  Trying to find out if this is realated to the iTunes upgrade.  Any ideas out there?

    Sure...
    See this Apple article for a Hard reset of a Factory reset.
    http://support.apple.com/kb/HT3728

  • Help!  Just did the Update (ML 10.8.4) after receiving a new HD since mine crashed last week, and now my Mac won't let me past the log in screen even with correct password.

    Help!  Just did the Update (ML 10.8.4) after receiving a new HD since mine crashed last week and the shop didn't update it back to Mavricks which I had previously done...and now my Mac won't let me past the log in screen even with correct password entered. It just spins like I'm logging in and then goes back to the user log in screen.  I did the process where I restarted and pressed control S and created a new user and password, but once created same issue and can't get passed that screen.
    Super frustrated and any help is appreciated!

    I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
    Today I discovered a new treasure of doggie poop in Lion. No Save As......
    I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
    So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in  mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
    are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
    I am starting to believe that Apple is Satan.

  • I just upgraded my operating system on my MacBook Air and now my laptop won't detect my Toshiba 1T external hard drive

    I just upgraded my operating system on my MacBook Air and now my laptop won't detect my Toshiba 1T external hard drive, how to solve this problem?

    Try some of the troubleshooting steps outlined below:
    Troubleshooting an external hard drive
    > Unplug the hard drive, wait a few seconds, and then plug it back in
    > Restart the computer
    > Unplug any other peripherals from the computer
    > Plug it into a different USB port
    If none of those steps work, see if it is recognized in Disk Utility.
    Checking a disk with Disk Utility
    To check a disk using Disk Utility, launch the Disk Utility application in any of the following ways:
    > Type the first few letters of its name into Spotlight. Select it from the results.
    > Go Launchpad > Utilities > Disk Utility
    > Go Applications > Utilities > Disk Utility
    Once Disk Utility is opened, check to see if your external HD appears on the sidebar. If it doesn't appear at first, try the troubleshooting steps above again while leaving Disk Utility open, each time checking to see if the external HD appears.
    Austin

  • HT4623 I have just upgraded my iPhone 4S to OS6.1 and now I cannot link or connect to the App Store

    I have just upgraded my iPhone 4S to OS6.1 and now I cannot link or connect to the App Store, any ideas?

    To do this your device should be firstly connected to computer and iTunes is open. Put your device into dfu mode: 1.turn off your device 2.press and hold power and home button simultaneously for 10 seconds and release power and keep holding home until iTunes says a device in recovery mode. now should be able to restore.

  • My mac won't connect to the internet without a ethernet cable please HELP!!!!

    My mac won't connect to the internet without a enthernet cable and when I go to Network Prefrences and go to airport and try to connect that way it dosen't connect and it says: AirPort 2 has the self-assigned IP address 169.254.201.215 and will not be able to connect to the Internet. PLEASE HELP

    Try letting the router assign an IP address. In System Preferences, click the assist me button for help.
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About
    Also try turning off Bluetooth

  • I just downloaded the newest IOS software and now my iPhone5 won't pair with the Bluetooth in my car (the car system says it's paired when I try to re-pair it but then when n try to make a call it tells me it doesn't recognize the phone.

    I just downloaded the IOS upgrade, 7.0.2, and now my iPhone 5 won't pair with my Bluetooth in my car, despite repeated attempts to re-pair the two and despite the fact it's been paired fine previously.  The car system tells me it's paired but then when I try to make a call I get another message that says there is no paired phone.

    You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens.

  • I own an Airport Extreme it was working ntil I switched from a DSL provider to cable, now Air Port

    I changed internet providers from DSL to Cable and now I cannot access my printer/scanner from my computers on the network, does anyone know what I need to do?

    On the XP machine, open Bonjour for Windows and reinstall the printer.

  • HT1126 I've just connected to a Time Warner cable modem and am no longer able to connect to the internet using our Airport Express.

    Would love some suggestions as to ho to get thi airport working again!

    I too just got time warner. I now have a motorola surfboard sb 6141 attached to my airport extreme. I have had problems with the AE when I was on DSL. I had to unplug it on average every 2 days to reset it as I would loose my WIFI connection. I've updated it to the most recent firmware and I reset it to factory condition when I joined Time warner today.
    The modem and router are in the kichen and if I'm on my laptop there the connection is almost alway great. But occasionally it becomes bad. In my office on the iMac the eventhough the signal strength is excellent the speed is either great or exceedingly slow. If I unplug the router and plug it back it, it becomes speedy again in the office. So I guess I need a new router, but this one is only a year old. Any suggestions?

  • Just moved from a PC to a Macbook Pro and now my Ipod Classic gets stuck on iTunes "syncing" even though I have it set to manual. Please help!

    Please help. I recently bought my first Mac (a Macbook Pro 15-in Mid 2012) and my iPod classic will not work properly when I plug it into my computer and open the newest version of iTunes. It played just fine on my old PC with iTunes 10. I have not updated the software on the iPod since I bought it a few years ago and even if I wanted to update it I couldn't becuse once I plug it in it gets stuck saying "syncing with iTunes." Well, I have it manually set so that I can add/delete whenever I want. So I don;t understand why it is giving me  this message and getting stuck. I've looked around the web and tried to install iTunes 10 but because I have the newest version already installed it will not let me replace it with 10.
    Does anyone know how this can be resolved?
    Thanks.

    Apple doesn't call its portable machines 'notebooks' instead of 'laptops' for nothing - using a MacBook Pro in your lap can cause some burns on your skin, poor ventilation, etc. So use it on a hard flat surface - not your lap, pillows, bedclothes, etc.
    As for burning a hole in your screen, you'll have to revisit the Apple Store and see how much they would charge for a new screen. It's likely to be a bit expensive.
    And if you've Safari set to re-open tabs when you restart, you can disable this feature -> Safari-Preferences-General.
    Good luck,
    Clinton

  • I may have deleted some system files from my computer due to my antivirus and now my imac won't start. Actually it does, and then there is a blank screeen with the apple logo and it shuts down right away. is tehre a possibility of recovering my files?

    Hello
    I was having some problems with my Imac, for a while it was slow and often disconneceted from my wifi, while this one worked perfectly (tested with other devices)
    I thoug i might have a virus, so i downloaded an antivirus (mac keeper) and started checking.
    I also did a scan of my computer using Console or something from the utilities, and then a folder popped witha  file I had canceled a while ago. I canceled the file and then my Imac continued to be slow.
    i then restarted my Imac, but when it started, the usual grey logo of Apple appeared, and then it shut down suddently.
    I tried to reboot it holding the command key and R but nothing, and then i tried holding the shift key and a bar appeared, and at half of the bar it sut itself down again.
    I think it is probably a preoblem because I may have cancelled some of the system files from a folder called "private" in the "documents" folder.
    Is there any way I can recover some of my files? maybe all of them? I hope so because I have some important files there
    Is this a thing I can do myself or do Ineed to go to a MacStore to repair it? Will I need to change HD or just to format it and reinstall? also if there is any way i can recover some of my files that would be great.
    Thanks
    Ludo
    P.S. problems appeared when i installed the Mavericks version.

    If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
    Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
    An Internet connection will be required (wired or wireless).
    At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.

  • TS1398 I just restored my ipod because the 'other' section was taking up about half of the space on my ipod and now I am unable to connect to the my wifi and I was able to before restoring the ipod.

    My wifi isnt letting me connect to it and i have no idea why. It was working just fine before i restored my ipod

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then
    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I just installed a LaCie 3TB harddrive on my iMac and now my iTunes won't open.

    I just installed a LaCie 3TB hard drive on my iMac and my iTunes will not open. It says some kind of error.
    The dude at the apple store told me this would be really easy to setup - total fail!
    Please help, I am not good with technology.

    "It says some kind of error."
    What error?
    What have you transferred onto the drive thus thus far?
    Details...

  • Just did a software update and now my mac won't boot

    On Monday I did my Apple update, and when I tried to reboot after the update I was greeted with a circle with a line through it. I still get the moving circle on the bottom, but it never boots.
    I do not have my original install disc, but I was able to use another G4 install disc to repair disk permissions and repair the disc. After doing so, I still have the same issue.
    Any ideas would be really helpful. Thanks

    Since Disk Utility can see your drive that is at least a good thing. I am just trying to establish where you stand on booting. Normally if you can boot but experience problems then you can try Disk Utility to repair the drive, which obviously doesn't work in your case. Next is Safe mode which starts up pretty much normally but bypasses some things, and that too is not working. Single User Mode takes you to a text presentation boot stage.
    Once one starts with the stronger medicine it is a good idea to back up your data files at least in case the things you do make the drive worse. Booting into TDM makes your computer act like a giant external hard drive and gives you the chance to copy off those files, assuming your friend has the room on her computer. Then you're more at liberty to experiment with different things to get your computer up and working again. If nothing works you always have the option of reinstalling OSX. You might consider an archive and install, or if you can copy your files off elsewhere just reformat the drive and do a clean install and rebuild everything.
    It may be a case where you may have to buy a utility like Diskwarrior which does things like Disk Utility repair but much more. Or if Diskwarrior doesn't work and you do need your files you may have to let a program like Data Rescue II have a go at recovering the files (but will need an empty harddrive at least the size of the data on your computer).
    At this stage you might also start looking at external bootable hard drives, both because it might come in handy now and also because you'll be able to backup your computer in the future in case of a repeat occurrence.

Maybe you are looking for

  • Crystal Report not running

    SAP users are imported into BOE, assigned to the same group. When I logon to BOE InfoView with user A, I can execute the Crystal Report (built on top of SAP BW Query). When I logon to BOE InfoView with user B, I can not execute the Crystal Report (bu

  • My new Iphone 5 won´t install applications from the cloud. It shows them in itunes but it refuses to sync with new device

    I upgraded from Iphone 4 to a new Iphone 5. I transfered all my info succesfully, but my aplications wont work properly: Viber speaker seems disconnected, I am not able to install new apps. I´ve restaured and tried to start from scratch, but this tim

  • INCOMING PAYMENT  ISSUE

    I need to post Incoming Payment for a customer via SDK. This case I have to select all transaction like ( AR INVOICE , ADVANCE AMOUNT IN INCOMING PAYMENT, CREDIT JE ,DEBIT JE ,OUTGOING PAYMENT,A/R DOWN PAYMENT , A/R CREDIT MEMO ) ERROR CODE is: BASE

  • Should I duplicate existing objects in designer

    Hi, I have existing webi doc reports running fine on exisitng objects in universe. I have foll tables joined: DailySales   -> CompanyCalendar | > SalesCommission From above I can compile sales commission montly. For a new requirement, a now have a ta

  • Final cut studio pro 6 install problems and error message

    Purchased a new macbook and am having trouble installing Final Cut Studio Pro 6- get this error message: You can't open the appliction FinalCutStudio.mpkg because PowerPC applications are no longer supported  - have never seen this before, any clues?