Just switched from Windows to Mac, how do I back my contacts, texts etc.?

I've been synching my iPhone to my Windows XP laptop for over a year for everything. I have backups of my phone on my Windows laptop which came in handy when I got a replacement iPhone and put all the contacts, texts etc. from my old one onto the new one.
I recently bought a new Macbook because my old laptop was dying on me. I don't want to sync my phone with 2 computers at the same time, I want my Macbook to be what I use for everything. Using an external HD I transfered all my music and videos over to the Macbook, and they're good to go in iTunes.
When I connect my iPhone to the Macbook, it doesn't give me an option to create a backup of the phone. This is very important if my phone ever decides to die and I get another one and easily sync it back with iTunes. If I decide to restore the phone with the Macbook, will it create a backup before it wipes it?

rebel1568,
All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC.  You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
CS3 is totally out of the upgrade or cross-grade loop.  You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
Curt Y is correct in that CS2 will not run on current Mac-Intel machines.  You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
Of course, you could run your Windows  on your Mac if you installed and ran BootCamp or Parallells.

Similar Messages

  • Switched from Windows to Mac, How do you change genre info

    Hello, like the title says, I switched from Windows to Mac.  I purchased the Mac Mini and when I import my movie files from my external hard drive into iTunes, not all are labeled correctly and in the right genre.  I want to change the genre and add the cover art but iTunes is coming up gray and will not allow me to change.  How can I do this?

    kcuculich wrote:
    Hello, like the title says, I switched from Windows to Mac.  I purchased the Mac Mini and when I import my movie files
    Don't import anything.
    Copy the entire /Music/iTunes/ folder from old comptuer to /Music/ on new computer.
    This is all you need to do to copy iTunes.
    Everything in iTunes will be exactly as it was on other computer.

  • Switching from Windows to mac, how to get master collection cs5 package for mac instead?

    Purchased Abobe Master Collection CS5 in 2010 and had been using Windows as an operating system since but I'm about to make the switch to OSX. However the download package and serial numbers I purchased are for windows, can I switch to mac download packages and will my serial numbers work for them?
    Thanks,
    Nicholas

    Unfortunately, Creative Suite packages are operating system-specific.  Further, platforem swaps are only supported for the mst recent release which is CS6.  You can read more about the policy thru the link below:
    http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

  • I have switched from PC to Mac how do i use my windows version  of adobe photoshop CS3 on my MAC?

    i have switched from PC to Mac how do i use my windows version  of adobe photoshop CS3 on my MAC?

    rebel1568,
    All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC.  You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
    CS3 is totally out of the upgrade or cross-grade loop.  You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
    Curt Y is correct in that CS2 will not run on current Mac-Intel machines.  You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
    Of course, you could run your Windows  on your Mac if you installed and ran BootCamp or Parallells.

  • I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already

    I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already

    It sounds unlikely of course. But from your question it's hard to tell what might have filled your HDD. Are you constantly on file sharing or has filled the drive with movies?
    Best way to tell is to start checking what folders occupy space. "Get Info" for the HDD and its subfolders is a way to start checking where the data in question resides.
    And as BGreg say, call Apple support is also a good way to begin with.

  • How do I switch from Windows to mac?

    How do I switch from Windows to mac on a macmini?

    Hi,
    I assume you are talking about a BootCamp Windows, right ?
    If so, usually you hold down the Alt/Option-key at startup of your Mac to get the Boot Selection screen.
    There you can choose which Operating System to boot into.
    Once in OSX you might wanna go to System Preferences - Startup Volume and set your OSX to be the default.
    Regards
    Stefan

  • Hi. Just switched from PC to MAC (lion 6.7) and I am trying to import my bookmarks but Firefox for mac will not recognize the file. How do I move my bookmarks to my MAC from my PC?

    Hi. Just switched from PC to MAC (lion 6.7) and I am trying to import my bookmarks but Firefox for MAC will not recognize the Bookmark back up file. How do I move my bookmarks to my MAC from my PC?

    Make sure that the backup file with the bookmarks has the correct file extension: .html for a HTML backup and .json for a JSON backup.<br />
    You can check that via the right-click context menu of that file and open the Properties.<br />
    If you are not sure about the file type then you can open the file in Firefox via "File > Open File"<br />
    A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links.<br />
    A JSON backup starts with: <nowiki>{"title":"","id":1,"dateAdded":</nowiki><br />
    An HTML backup starts with: <nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki>

  • I just switched from pc to mac.  what is the best way to keep Windows?  Parallel or Boot camp?

    I have just switched from pc to mac.  What is the best way to keep Windows, Parallel of Boot camp?

    Parallels should be able to handle that without any problems.
    There is a version of both of those that will run on the Mac. So you might consider upgrading to that version instead of going with Windows on your Mac.
    Allan

  • I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

     I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.  
    I am currently using Photoshop Elements 8 on Windows 7.  After several years of use, I am self taught and adequately proficient for an amateur.  What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing. 
    Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust.  Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom.  Frankly, I'm thinking that it would be smoother to stay within the Apple product line. 
    So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies).  But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
    - If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?  
    - if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?  
    - Can it splice together several separate photos to give a panoramic?  
    If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not  support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).  
    Thanks in advance for your consideration and help! 

    I am concerned, however,  about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
    Thanks for any insight on this
    Amy,
    Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
    One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
    The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
    Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
    One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

  • Ipod Switch from Windows to Mac:  Possible?

    Hi, I'm new here. If this has been asked, I couldn't find it.
    I just bought a Macbook Pro; first Apple computer I've owned.
    My iTunes library is on my IBM. Is it possible to get my songs into my Apple and then reformat the iPod and reload them?
    thanks.
    Regards,
    Mark

    You can use your iPod which will work on your Mac, there are a number of third party utilities that you can use to retrieve the files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. I use Senuti but have a look at the others and go with whichever you prefer.
    Senuti Mac Only
    iPodRip Mac Only
    PodWorks Mac Only
    iPod.iTunes Mac Only
    iPod Access Mac and Windows Versions
    YamiPod Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    Another way of course would be to network the two computers and copy over your iTunes folder. There is a good general guide to switching from Windows to Mac at the following link that touches on moving music as well How to Move to a Mac - Get your stuff from your PC to your new Mac
    There are also these guides:
    How to move music between authorised computers
    Moving your iTunes Music Folder This is written around moving to another drive on your computer but should adaptable for moving to another computer ok and also Networking with a Windows PC
    Don't forget by the way if you have purchased any tracks from the iTunes Music Store to deauthorise your old PC if you are disposing of it so you don't use up your 5 allowances How to move music between authorised computers

  • Please help:  I've just switched from Windows

    Dear Board,
    I've just switched from Windows (purchased a Mac Pro for audio work) and I keep trying to right click the mouse for extra features like...(save, save as, open in new window, close) and none of these options seem to be available except as key commands.
    Can someone instruct me on how to do this, if it is possible?
    Thanks,
    B3
    Mac Pro 2.66/3 gigs ram   Mac OS X (10.4.8)  

    Hi, B3.
    1. If you have a two-button mouse, then Mac OS X should recognize the right-click to display the contextual menu for an object. However, some third-party mice, e.g. Microsoft Intellimouse, etc. may require you download and install the Mac drivers for such.
    2. What mouse are you using?
    3. If right-click isn't working, you press and hold the Control key, then click with mouse button 1 (left mouse button by default). Then release the Control key.
    4. There are fewer contextual menu choices in Mac OS X than in Windows, but I'd also not run out and download all sorts of third-party contextual menu items willy-nilly as these can be problematic.
    5. Since you just switched from Windows:• When looking for new applications, I recommend searching MacUpdate or Version Tracker. The user-submitted reviews accompanying the listings can be helpful in sorting the wheat from the chaff.
    • My "Learning About Mac OS X" FAQ has a number of resources that you will find helpful including books, online training, switching from Windows to Mac, and more.Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Switching  from Windows  to Mac. Is it worth it? Please help!

    Hey everybody,
    I think I finally made my decision to switch from windows to Mac,..the I-book. G4 (not the power book). The I-book I want is around 1299.00, with the wider screen,..than the smaller i-book.
    Anyhow,.what led me to this decision was just sending back the Sony FS series. It was sleek beautiful and"white" like I love,..but the speakers were awful. I have just about given up on trying to find a decent notebook. I love the look of the i-book,..but cant get that gorgeous wide screen from Sony out of my mind. It was more than the speakers. Just too noisy. Anyway...if you bought this i-book all over again,..would you? Alos I have a brand new Linskys Router with the built in Security. Would the Macs intergrated wireless card,..work with my router?
    Please help!
    Lil
        planning on getting this notebook. Need advice

    I'm afraid you're not exactly going to get an unbiased opinion here
    As a long-time Mac fan (back since System 6) who was forced into a PC world man years ago, OSX has re-kindled my passion for computing. I'm an old Unix guy and OSX has combined the best PC operating system with the power of Unix. To the average user who doesn't care about shell scripts and porting free applications, what you'll get from Unix is a tremendous amount of reliability and security...
    One of the best reasons for anyone to switch to the Mac was summed up in a post over on iLounge as a reply to someone who was switching. When asked why anyone would switch, one reply simply said, "...because he realises that a computer should be a productivity tool, not a virus scanner."
    In the year since I've bought my Mac Mini, the only failure I've had has been a crash of Virtual PC (an emulator that will allow you to run your old Windows-based applications), which took the virtual disk out and forced me to reinstall my Windows environment. That's nothing different than I've experienced countless times on my old PC.
    That said, I'm looking at a 12" iBook. I didn't even consider the 14" because I don't want something larger that doesn't give me extra screen real-estate. I debated the 15" Powerbook but decided I don't really need it's larger screen, and I'd rather have something more portable. There are companies out there that sell dual-layer DVD-RW drives that can be installed in an iBook (even the 12" Powerbook only ships with a single-layer DVD burner).
    512mb should be plenty, unless you plan on editing video or running Virtual PC--in which case, I'd recommend at least a gig.
    Mini   Mac OS X (10.4.3)   12" iBook + 2.3ghz Powermac on the way! Former Newton OMP user.

  • IPod classic - switching from Windows to Mac

    I have an iPod classic and am switching from Windows to Mac - what's the best way to retain my iPod library? Thanks!

    If you just want to connect and use the iPod on the Mac then set it to manual update on your PC first. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
    Using iPod with Multiple computers
    Managing content manually on iPod and iPhone
    Syncing Music to iPod
    Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
    Macs can read Windows drives, the iPod shuffle for instance comes Windows formatted and is fully supported (you can update the firmware or restore it on the Mac and it retains it's Windows formatting). Other iPods (such as a 5th Generation or Classic for example) can be used in Windows format on a Mac but have to have the firmware updated or be restored on a PC to maintain the formatting. If however you don't intend using the iPod on a PC again you'll need to transfer your library from your PC so you can restore and reformat the iPod and keep it's firmware updated.
    Once you are safely connected there are a few things you can do to restore your new iTunes directly from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    Senuti Mac Only (Currently only the beta version is iPod Touch & iPhone compatible)
    PodView Mac Only
    PodWorks Mac Only
    iPodDisk PPC Mac Only (experimental version available for Intel Macs)
    TuneAid Mac only (iPhone and iPod Touch compatible)
    iPodRip Mac & Windows
    YamiPod Mac & Windows
    Music Rescue Mac & Windows
    iPod Music Liberator Mac & Windows
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    Floola Mac & Windows
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide

  • Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window.  Can't make it fill the screen. Just switched from windows.  Thank you.

    Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window.  Can't make it fill the screen. Just switched from windows.  Thank you.

    Check to see if the resolution has been changed in System Preferences.
    Allan

  • My macbook pro out of screen when i switch from windows to mac

    my macbook pro out of screen when i switch from windows to mac , mac is running but out of screen , what should i do??

    my macbook pro out of screen when i switch from windows to mac , mac is running but out of screen , what should i do??

Maybe you are looking for

  • Program times out while looping at internal table with huge records - Needs fine tuning suggestions

    Hi, I am trying to execute a report. It times out while looping at vbap internal table. This internal table has 140000  records and does the validation within this loop and geenrates data for the output. Due to this huge volume, the program times out

  • CL_gui_frontend_services-To read data by selecting file from file dialog

    Hi I have a requirement in which - I have to selct the file using file open dialog . Cl_gui_open_frontendservices . From this I have to read the data into internal table . How can I get the data  after getting the file name . Does any one have idea o

  • FACTORY CALENDER

    Hi, In my system, one public holiday(15th May) is defined as with option," with fixed day from date ". actually in the current scenario with "fixed day from date, option , in the next sceen, the weekday is defined as monday and the next tab shows the

  • Restore with brtools - need more archive redolog files

    Good day I will make online backup my oracle database with brtools (Oracle 10g, BRBACKUP 7.00 (39)) brbackup -c -d util_file_online -t online -m all -u / bdztoexw anf  2009-01-23 15.27.40 ; 2009-01-23 16.47.21 ; 1  ...............     57    56     0 

  • Developers Wanted -- Apply Within

    Hello all, First, a little history.  Up until now, the development process was fairly short and simple.  The existing developers kept a watchful eye on the community for knowledgeable, helpful and prolific users.  When the time came to grow the team,