JUST TOO LESS OF RAM ON THE N95
I have always been a Nokia fan for many years and have always recommended Nokia phones to all my friends. I however bought the N95 and am terribly dissapointed to find that the RAM is totally totally inadequate and one just cannot enjoy the phone due to this humongus impediment as it will refuse to run multiple programmes effectively and crash at the slightest load of more than two softwares running together.
I implore you to immediately rectify this flaw or else you will lose the loyalty of your most loyal customers and lose sales rapidly as such a high end phone will only be bought by people who would definately like to enjoy their installed softwares and would be totally frustrated if the system crashed time and again due to totally inadequate memory on a so called "Smart Phone" which apparently is not that smart at all.
05-May-200709:11 PM
djtezze198 wrote:
runs fine for me.
Ditto...
I love mine, as do many other users here, and I'm sure many other users that don't come here...
There are always people that are less than satisfied, but there are options to try to rectify it...
Try resetting your phone - *#7370# on the main screen - make sure everything's backed up though.
Nokia Software Updater - check to see if there's a firmware update available - if there isn't at the moment, there's on in the pipeline, so keep checking.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5
Similar Messages
-
My bill is just too high! What is the cheapest way to switch if I'm still under contract?
I have four lines. It is costing me $260 a month for unlimited talk and text, and 6G shared data. It is killing me to keep this up, but I still need my lines. I'm researching other carriers to see if I can get my bill to $150 or less. There are options, but after October I will still have one line under contract. Can anyone guess what my early termination fee would be at that time?
When you log into the MyVerizon account for the account owner, go to change features. At the top will be an option to add a line fee discount if it is not under contract. Click on that. You would have to do it for each line which is not under contract. With a 6 GB shared data allowance, you would get a discount of $10/line not under contract.
Depending on how many lines you have out of contract, it MAY be beneficial to increase your data allowance to 10 GB/month. If you have a 10 GB/month data allowance, you would get a discount of $25/month/line. The increase in cost from 6 GB to 10 GB would only be $20/month(6 GB cost = $80/month, 10 GB cost = $100/month) but if you have 2 lines out of contract, the increase in discount would be $30/month(2 x $10/month discount = $20/month, 2 x $25/month discount = $50/month). When you get another line out of contract, your discount would increase each month by either $10 or $25 depending on you data allowance. -
How can I tweak firefox to use less of RAM?100MB+ is too much for my system.thanks
Ok,
I have latest updated version of firefox.
I have hp510 laptop with 1 GB of RAM.
My problem is that firefox is really good but uses too much of RAM(100 MB or more) while in usage.
How can I tweak firefox to use less RAM, as my system gets hammered.
Thank you.
Dannythanks.
I opened my extensions, and all are disabled, except ADBLOCK.
I usually clean my history on weekly basis, sometimes even on daily basis.
When I use firefox, most of the time ther is no other application in use by me (I don't encounter all those back apps for the system).
Most of the time, I have only 2 windows open , very rare there more.
The issue is that even at starting of firefox session I can see in task manager there is minimum 95 MB or charge, without any work done by me.
I usually have charge about 370-390 MB of RAM, but when I open Firefox it gets me up to 500 or more. -
After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
They will have the same features once the iphone 5 comes out they will both have ios 6 , passbook, panerama mode, ect. The iphone 4s just cost less. im not worried so much about the screen size i just want to know some opinions. And what color is good for a guy to get?
That is your decision.
The 5 has a faster processor, more RAM, and a larger screen. The biggest difference is LTE.
Buy whatever fits your budget and needs.
Personally I just got a 32GB 4S on closeout from AT&T for $199... to me it was worth saving $100 over a similar iPhone 5.
Color is your choice, again my personal opinion is white electronics are hideous. Many will disagree with me on that, but I cannot help that they have bad tastes. -
My iPod touch screen just turned a white-ish green color and I can't turn it on or off. I can't connect it to iTunes, and the back is too scratched up to see the serial number so I have no way of getting it. Can someone tell me how to fix it? Please tell me quickly! I was right in the middle of something!
Did you try a reset?
iPod touch User Guide (For iOS 5.1 Software) -
Is it possible to change just the ram on the motherboard (G5) or do you have to change the whole motherboard?
I do understand that... but this is the problem - The computer freezes when it is put to sleep (and sometimes more frequently). Apple told me that it could be three things: ram, hard drive or the motherboard. - take the ram out and then put the computer to sleep, if it still freezes than it is one of the other two and not the ram. They told me that there is ram on the motherboard. So I tried that and the computer wouldn't even boot up. So I thought the problem is the motherboard and possibly the ram on the motherboard. I really have no idea what I am doing, I just don't want to have to throw a $3,500 (when new) computer away.
Thanks! -
Just updated from iOS 6 to 8, I find the tool bar in the iBooks too wide as it blocks the running title of my books. Anyone experienced this? Any solution?
In the last few days, it seems that my computer has all of a sudden caught a virus.
As others have pointed out, this isn't malware. That should not be your first (or even fifty-first) thought when your Mac starts misbehaving. For more on this topic, see my Mac Malware Guide.
I know the last ditch effort (after cleaning and maintenance of disc verification and permissions and repairs, is to reboot from the system disc.
You mention "cleaning and maintenance." Have you been running utilities claiming to do those things? If so, you may be the victim of an overly-zealous cleaning job, which has removed important files and damaged your system.
If I'm understanding correctly, you're unable to open any applications at all... is that right? Do you have any backups? If you don't have backups, you're in a sticky situation, as it will be difficult to make backups in your current state, but you shouldn't try any kind of repairs without them. (Actually, you shouldn't do anything with your computer without backups, but this is especially important when something is going badly wrong.)
If you have backups, reboot from your Snow Leopard install disc. From there, first, repair the hard drive with Disk Utility. Once that is done, assuming repairs were successful, reinstall the system. You can simply reinstall it on top of your current system, and it will replace any damaged or lost system files with new copies. (You'll also need to update the system via Software Update after reinstalling.)
If you don't have backups, or if Disk Utility can't repair damage, or if the problem continues even after a reinstall, post back with those details. -
The volume is just too **** loud! :)
When I hook up my iMac to the normal speaker system, it's all good, I turn the volume way up in Leopard, and then proceed to 'down-tune' it with the speaker's own volume knob.
But there are times the rest of the house is still asleep, and I use the headphones that came with my iPod. The problem is, I can't turn the volume down far enough. 0 'blocks' of volume (in Leopard) is completely muted, and 1 'block' is already too loud. Of course, some applications have their own volume control (iTunes, Quicktime, etc), so I can turn it down there, but that does not control the volume of the system's own sounds (The "Ding"-download-is-done-sound for instance).
Is there a way to turn the volume down in the system (like, 0.5 'block' would be ideal) without using headphones with a built-in volume control? (for one, I don't own one of them, and secondly, they usually destroy sound quality)
Right now, I kinda feel like Huey Lewis in Back to the Future. "It's just too **** loud".Sorry but I don't understand which "block" you are talking about. Volume adjustment is continuous rather than discrete. If you do it in System preferences->sound, the volume bar is nice and long so it shouldn't be hard to find a good level.
Message was edited by: V.K.
Ah! I think, you mean the volume button on the keyboard. Just do it in system preferences or using the volume bar in the menu. -
Suddenly Firefox is crashing just as I hit send on an email...losing everything I've written! I hate IE, too. So what's the best browser?
You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the Report ID of recent crash reports on the "Help > Troubleshooting Information" page (about:support).
*Click the "All Crash Reports" button on this page to open the <b>about:crashes</b> page and see all crash reports.
If necessary then you can open <b>about:</b> pages via the location/address bar.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter -
I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!
I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards -
I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.
Exactlly which model iMac do you have?
see > How to identify iMac models
Unfortunately that is not all that uncommon for the Early Intel iMac's given there age and the fact that the air intakes are probably choked with dust. Then add the extra heat caused by running a more intense OS X which is causing it to run a little warmer than normal and putting extra stress on the graphic and display components.
My 6½ year old 17" Early 2006 Core Duo w/2GB of RAM is also running 10.6.8 and is also starting to get a single line that (knock on wood) goes away after a few minutes, while many others started getting permanent ones after 2 or 3 years. One thing that I think has helped, is that about every 3 or 4 months I shutdown and vigorously vacuum out the bottom grill work and small vent under the stand to keep it running cool.
On that note: unfortunately I can only suggest that you clean your intake vents and hope that no permanent or irreversible damage has been done. -
Hey so I have been dealing with random reboots and computer freezes since upgrading my RAM. I also reinstalled my 10.8.2 at the same time I upgraded my RAM. I have a Mac Mini Mid 2011 with the OWC Data Doubler Kit and a Crucial M4 128GB Boot drive. My computer reboots every 30 minutes or so and sometimes completely freezes up. I am trying to figure out if the new RAM is the issue as I can send them back. I have ran several Rember RAM tests but the computer freezes mid test so I can not see the issue. All other times it completeles the RAM test with no issues.
Any help is greatly appreciated!
Here is my last crash report:
Thu Mar 7 15:34:36 2013
panic(cpu 0 caller 0xffffff8009ab7b95): Kernel trap at 0xffffff8009a76c4e, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffffa00cffad88, CR3: 0x000000000582b00c, CR4: 0x00000000000606e0
RAX: 0x0000000000000000, RBX: 0xffffff800d17f488, RCX: 0x0000000000000000, RDX: 0xffffff800a0bd430
RSP: 0xffffff80fa013d10, RBP: 0xffffff80fa013d60, RSI: 0x0000000000000000, RDI: 0xffffff800d17f488
R8: 0xfffffffffffff000, R9: 0xffffff801b50b5d0, R10: 0x000000010ccc3000, R11: 0x0000000000000200
R12: 0xffffffa00cffad78, R13: 0x000000000000007d, R14: 0x0000000000000000, R15: 0x0000000000000000
RFL: 0x0000000000010293, RIP: 0xffffff8009a76c4e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffffa00cffad88, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80fa0139b0 : 0xffffff8009a1d5f6
0xffffff80fa013a20 : 0xffffff8009ab7b95
0xffffff80fa013bf0 : 0xffffff8009ace4ad
0xffffff80fa013c10 : 0xffffff8009a76c4e
0xffffff80fa013d60 : 0xffffff8009a7be07
0xffffff80fa013d90 : 0xffffff8009a75cf4
0xffffff80fa013dc0 : 0xffffff8009a75150
0xffffff80fa013e00 : 0xffffff8009a66b2c
0xffffff80fa013ef0 : 0xffffff8009a6a890
0xffffff80fa013f20 : 0xffffff8009db8d66
0xffffff80fa013f50 : 0xffffff8009de17da
0xffffff80fa013fb0 : 0xffffff8009acecf3
BSD process name corresponding to current thread: syslogd
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x0000000009800000
Kernel text base: 0xffffff8009a00000
System model name: Macmini5,1 (Mac-8ED6AF5B48C039E1)
System uptime in nanoseconds: 151583130298
last loaded kext at 11211562865: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f8b414000, size 28672)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.0f2
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.ApplePlatformEnabler 2.0.5d4
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyDriver 2.3.0f2
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f8
com.apple.driver.AppleHDA 2.3.0f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleMuxControl 3.2.6
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.AirPort.Brcm4331 600.15.20
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBUHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 86.0.2
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.AppleSMC 3.1.3d11
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0Reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts on the memory modules when handling them. If necessary, clean them with a mild solvent such as rubbing alcohol.
The Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test. -
MSI Big Bang-XPower II More MB RAM than the CPU can handle...
I understand reading in a few forum post :" By making more memory available to the system more data can be cached in RAM, so there will be less hard drive activity, and less swapping to memory so your system will perform better." But what happen when motherboard for a desktop that supports( and had install) more RAM than the processor can handle?(aka:processor Max Memory Size).
Please comment in this configuration.as I 'm looking for a MB than offer me the more SATA6 connection i found a few available using LGA2011 socket (MSI Big Bang-XPower II LGA 2011 Intel X79 SATA 6GB/s USB 3.0 XL ATX Intel Motherboard with UEFI BIOS) than support 128GB. As I understand the processor Intel® Core™ i7-3930K Processor only work with 64GB.
Is there any advantage to have a MB that hold a bigger RAM capacity than the CPU? If so, how can this be translate using in a program like Adobe After Effects, RAM preview? thankMore Memory doe's not make it faster as its Volatile Memory (more RAM but it has to be run at much slower speeds) that is very short term and is just a buffer for active Programs and files it Caches there while its active but in no way improves system speed (as it has to be clocked slower to allow the IMC on the CPU to cope with it)! more memory just allows more Active Large programs and files open at the same time and huge amount of ram will only really be of benefit for things like Video Editing, photo editing and 3D rendering as those take alot of ram to allow all the computations that the CPU does to be held for quick access but only when they are active!
having more RAM then your CPU can Handel is a VERY BAD IDEA as it will just refuse to even post or in very rare cases damage the CPU's IMC leading to a dead CPU!
why MSI have done that is for possible later 2011 CPU's that may allow the 128GB of RAM limit to be used but currently they do not exist currently as X79 is a more professional grade Platform that will probably be around for years to come (may be used for many upgrade cycles and may eventually have a cpu that can use 128GB or ram) and who knows what will happen with Intel CPU's in that time frame! (more of a possible forward compatibility thing as its a very high end platform)
as for after effects it uses RAM for holding Render Files so in theory more ram will just allow it to render Larger files that are more complex without hitting the Available Ram ceiling that your computer has but it will not render any faster as a result it just gives it more headroom to work in!
so overall more ram = more Active space available & no increase in speed (actually maybe a drop in speed as it needs to run slower causing LAG/Latency) so it all depends what is important to you here to whether more ram is of any benefit or just a hindrance but that is down to your own use case scenario! -
Is there a facility to put a GPS aerial on the N95...
I got the N95 really in order to have a neat GPS/OS map system for hill walking and a phone in one and have just been trying my N95 with some OS 1:25000 and 1:50000 maps from Viewranger (excellent mapping product, excellent service). Walking about with the phone open in your hand to maintain GPS reception is a pain - I wonder if there is the facility to have a simple wire GPS aerial like a headphone wire for FM reception so the phone could be in your pocket (except when you wanted to check the map) and the wire outside? Bluetooth would drain the battery too much, especially if GPS was running. One other option would be a case like an IPOD case that runners use, strapped to your arm to leave your hands free - perhaps those are available - anyone know the answer to these two questions?
Idea for Nokia - how about making the maps downloadable by country - for example Europe is a whopping 1.4GB and took me more than an hour to download, fortunately to my PC. To be able to download just single or multiple countries would be great.25-Aug-200707:12 AM
ivor_bigun wrote:
I use the Holux see below for details
GPS Bluetooth Receiver - HOLOX BT-321 - Complete - VGC this is an Ebay Item number: 220141858376
shop round I paid about £15 its about the same size and weight as a standard box of mathes
It works really well looks on fast works "indoors" in the car back jeands pocket sirf 111 tech and has auto power shut down too.
I use mine all the time The battery outlasts the N95 battery and can charge via a USB cable mains 250v ac or 12 v dc all supplied with mine
and it lets 2 devices to connect IE have have the N95 connect to carkit via bluetooth but it also connects to Holux so I get navigation on the car ice
Does this GPS receiver work with Nokia Maps? If it does, how do you get the phone to use it instead of its internal GPS receiver?
T-mobile please give us v.20 N95 software.
Maybe you are looking for
-
Where is coding guideline for SharePoint 2013 available?
Can any one suggest where is coding guidelines and best practices for SP 2013 development is available?
-
Multiple slashes additional question
I use the filebrowser to select my links. However Dreamweaver generates the ../../ (one folder back I was told) and can I change the dreamweaversettings so that it don't?? Love&peace from Mark Cedermark.
-
Home Directory and different volume failed generates log in failure
I'm running OS X server 10.5.2. The set up is still used for test and learning purposes but I'm nearly finishing and knowing what I can and want to do. However, there remains a large issue unresolved. I have several volumes available on me server 1.
-
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPT
Hi there, I am trying to publish a file from SAP as web service using XI and SOAP Adapter. I am using ABAP proxy to get the data into XI. Designing and Configuration in XI has no problems because when i use File adapter the data is trasmitted to FTP
-
Help upgrading from itunes 7 to 8
when installing itunes 8, i get the message: The features you are trying to use is on a network resource that is unavailable. And am unable to install it. When i go to add/remove programs, there is no uninstall button. thanks.