Just tried to upgrade to SnowLeopard with new software. iLife failed to download and now the computer will not start up--grey screen with lines going round and round in a circle. What can I do to get it to start up?
Just tried to upgrade to SnowLeopard with newly purchased software disc. iLife failed to download and when I tried to restart the computer, it will not do so--just get a grey screen with the lines going around and around. Any ideas about how to get it to start?
Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD
Similar Messages
-
After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?
Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?
-
HT1883 I am trying to run a hardware test. The Computer will not start with the "D" key held?
I am trying to run a hardware test. The Computer will not start with the "D" key held?
If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
Running AHT in Lion
http://support.apple.com/kb/PH4510 -
While searching the internet last night my Macbook pro froze up and would not respond to anything. I restarted the computer and now the computer will not ecen start up. It will go to the gray screen with the apple sign. It is there working for 10 seconds and finally shuts down again. Any ideas how to get the computer to come back to life?
Go step by step and test.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836 -
Hi , My modem got zapped by lightning yesterday. My iMac still was able to power on when I tried it yesterday. Today the modem is replaced and internet is working, but now the computer will not power on. I followed the steps to reset SMC. Nothing. ??
Ouch, not much more you can do, I think you'll have to have it looked at.
-
help
Thanks for your reply, but I've already done that and the Column Browser options are completely grayed out. I've taken a screen shot and hope I can paste it in here. You'll see I have the sidebar open. That's the way I prefer to deal with iTunes.
This happened after I updated to iTunes 11.0.4. Perhaps that changed the setting options. I think I had the Column Browser option prior to that, but I just got a new iPod and I was busy loading stuff, so not completely sure if it worked before the update. But I think I would have noticed, because it bugs me so much not to have the option. -
I just upgraded to relaese to release 11. My PC runs Windows 7. itunes will not start. I have run Norton to fix the registry errors and have rerated my PC twice. No luck. Can anyone provided a suggested solution?
This solved everything, after uninstalling IObit Advanced SystemCare iTunes would open with Bonjour enabled however iTunes wouldn't pick up the iPhone device. I did some more digging and a few of their other applications had been installed including Game Booster. Uninstalling that put everything back to normal.
I have been given a new device by Apple who were really helpful and the guys have neever seen the docking connector disabling before. Coinsidence?
Anyway in case this helps other people these were the symptoms (might help with searches):
- Windows 7 Ultimate 64bit
- iTunes 10 wouldn't open originally, just egg timer then nothing yet processes all started
- Docking connector died on the device, wouldn't even trigger a standard USB connection or light up the device
- Uninstalling iTunes etc didn't change anything
- Disabling Bonjour worked but iTunes extremely unstable, seems frozen when syncing and the sync itself, especially with app transfer, was extremely slow and the other buttons were unresponsive after clicking for two minutes before screen would change
Have sent feedback to IObit about this to see if there isn't something that can be done.
Fantastic assistance and an incredible spot from b noir. If you come to the UK you need to drop me an email as I owe you a night out on the town!
- -
I have downloaded Elements 13 - but when I go to Set-up it initialises the installer, I then say I have purchased and it asks me to sign in. But when I put in my password - I just get four boxes going round in a circle. Can you help ?
Hi Kartikay Sharma,
this happened after I downloaded the PSE13 SW, extracted the zip file and launched the Set-up.exe for the very first time, and on every retry.
It asked for my Adobe Id, and after entering it, those four squares started to circle and never stopped, as described by jeni69.
All I want to accomplish is to convert a photo catalog from album starter edition 3.2 to PSE.
After failing to install PSE13, I downloaded a trial version of PSE12, and installed it successfully. But now I am stuck with a conversion error. (Sorry, don´t have the English version)
Do you happen to know, which version of PSE would be capable of converting an Album Starter Edition Catalog?
Thanks for your help
Cheers, Frank -
I want to start a new iTunes U course for catolog and I don't know what can I do please give me description about this title.
If you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
I purchased a new computer and also Adobe acrobat XI Pro. It has not worked properly. I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number. What can I do?
Hi,
Have you tried the help documents below:
Error "The serial number is not valid for this product" | Creative Suite
Invalid serial number error
In case of any other error message, please specify.
Regards,
Sheena -
I have forgotten my master password and my admin password. What can I do to get the passwords or reset them?
-
Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help
Go here: http://www.iclarified.com/entry/index.php?enid=750 and download iOS 4.2.1 for the iPhone 3G. Perform a restore, but hold down ALT when clicking restore. Restore from this file you just downloaded. You should not get 1015 as you are upgrading, but if you get a different error, report back.
-
My computer will not start up. It powers up, I get the gray screen with the apple, then the loading progress bar starts loading to about 25% the the screen goes black. what can I try to get my computer up and running?
Carolyn Samit wrote:
iMac, Mac OS X (10.7.1)
Use Command + R for Lion Recovery
Try restarting, when you hear the startup tone hold down the Option key. Then choose the Recovery Partition. -
Just yesterday I downloaded the newest update for iTunes, a few days before doing this I purchased music, but after doing the update my songs will not play. It shows a message that says this file cannot be located, what can I do to find the location?
The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
My daughter has an iphone 3gs and it required an update. So i connected the iphone to itunes for the update and the iphone locked up . I had to reset the iphone back to factory settings and now the iphone will not activate , Please advise what i can do to get this working for her ?
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
Maybe you are looking for
-
Editable field in ALV does not accept negative sign values
Hi guys, We have an editable field in ALV but it does not accept negative sign,,, it is causing an error... We need to input a negative value in that editable field... How to handle this? Thanks!
-
"Bill/challan No" field as required entry in MIGO
Hi Experts, I want to make the Bill / Challan No field in MIGO as required entry and not as Mandatory where in which system has to issue a warning message in case the field has not maintained. I used the transactions OMJX and OMJN and selected the Hi
-
User exit for field addition on standard SAP Screen
Hi, I want to add one customer specific field on notification at header level. I have found one enhancement i.e. user exit QQMA0001, which says that this is to be used for adding the extra field on the notification header. Now my question is that 1.
-
Messaging Server 6.3 proxy IMAP to UWash IMAP server
We have a Sun Java Messaging Server 6.3 set up and we'd like to migrate our users a few at a time from an older mail server running UWash IMAP (v2006g) to the new Sun Messaging server. I am told by a Sun Engineer that this is possible by setting the
-
Registering my ipod thru i Tunes
Everytime I connect my ipod it wants me to register it. I have tried for 3 days to register. Everytime I get to the end (where you enter your credit card). I get the message "We are currently experiencing technical difficulties. Please try again late