Just update BOM usage qty via ECN
Hi, All,
I face a trouble on BOM update via ECN. for example,
in product trial run phase, I created a BOM and set component qty as 1ea, and scarp as 50%. meanwhile, I also know that, after 3 month, (for example: in 1st July) the scarp will be update into 3% because the product will going to mass production, so, I also created a ECN, and just set scarp as 10% at that time.
However, some time later (maybe 2 weeks), customer ask us to change the component qty as 2ea. so, I create a ECN to update the BOM.
in 1st July, the bom was changed and set the component qty as 1ea, scarp as 50% due to my pervious the ECN. I hope the component did not be changed.
Hi, everyone please tell me, can I just set a ECN just update scarp instead of whole BOM item?
Regards
Henry
Dear Henry,
You can create a separate Change number or use the same change number to make any BOM changes,it may be a quantity
change or else scrap % change etc.
In my understanding it does not mean we have to use the change number only to change the component or it's quantity.
Check and revert
Regards
Mangalraj.S
Similar Messages
-
I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up
To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit. -
Just updated to version 4.35 via itunes. My icons are now massive making it almost impossible to do anything, even open up. Can anyone advise me how I can revert to normal font/icon size.
Try to double tap with three fingers on the screen to get back to normal size.
Zoom in or out: Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
page 204 iPod_touch_iOS4_User_Guide
Message was edited by: Ingo2711 -
How to update BOM with diff. ECN
Hi Team
During change in BOM using ECM, I am allowed to change it with same ECN. If we change it with diff. ECN, it keeps the history of previous ECN.
Foe example a BOM has 3 diff. items, which is created with ECN: 001.
Now if we delete 2 items & add 1 item, then system displays all the items with respective change no.
i.e. Total 6 line items are displayed.
Pls suggest solution.
ThanksHi Bhushan,
For your case you need to :
Create a different Change Number through T Code: CC01 and create a new BOM (for the same material as it exists without ECN agaist any components) with this new change number. If you now delete / add some components (after you enter the BOM with this new ECN) ;it will be exclusively be recorded with this ECN.
If you use the same ECN; and do further changes at the components; all chages till date will be recorded as you have mentioned.
Thanks,
Ravi. -
Just updated to 5.3 via CC, having problems
My windows 7 machine has a i7 920 processor with 12 gigs of RAM. My work flow is to import 3 bracketed RAW files into LR. I blend the editted shots to a blended single which opens as a TIFF in Bridge. I open the file in camera RAW from Bridge to make small edits then go into Photoshop CC for crop, vertical straightening etc. Since the upgrade when I try to make adjustments to the original RAW files in LR 5.3, any slider movement causes LR to hang. Doesn't hang for long but it is very frustrating. Also the defringe tool in LR 5.3 causes large areas of grey along edit areas. For example along tree limbs against a blue sky, when I remove small amounts of purple fringeing it wraps the limbs with a gray outline. Even with the amount slider set at 1, I can still see the gray outline. Don't really have time to deal with this now as I am on a deadline. Is it possible to do a system restore to before the update? Any other way to go back to the previous version?
Problems are relative...I use the latest iPhoto without problem. However, I do not know anything about Aperture ( I do not use it).
Barry -
I need this phone working tonight as i just started a new job and ABSOLUTELY need it for business purposes!!
I have also reinstalled itunes and there is the same response when i try to restore my phone
-
Just updated my iPad 2 via iTunes to iOS 7.0.2. So far everything loaded except for sent mail. Is there anyway to recover the sent mail?
You'll get a variety of earlier versions of iTunes here: Old iTunes for Mac
-
I just updated my iPhone 4 to iOS6. In the process, I ran into a problem and had to restore factory settings. After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "Cannot Download. There is not enough available local storage to download these items. You can manage your local device storage usage in Settings."
How can this be the case when I haven't changed any apps from before updrading to iOS6, and I don't have any music yet on the phone? Why is it telling me there is not enough local space?Hi RileyAvaCadenRiver,
If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
Apple: iTunes 11.1.1
http://support.apple.com/kb/DL1614
Regards,
- Brenden -
Hi,
First-timer on this...Just updated my printer which was less than one year old, to one which had Air Print capabilities. This one is the Epson XP605 which has two trays, one being for photos. Each time I tried to Air Print a photo, it printed from the A4 plain paper tray instead of the Photo Tray.Twice...then I came into my study and changed the printer settings to Tray 1 (photo tray) Photo paper, size 5x7 and Photo Best, but still it printed on plain A 4 paper. Would be most grateful for any help, although I did read on one Apple site that AirPrint may not be able to choose trays!!!! "may not"?? ThanksI just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it. -
QUESTIONS: I have an iphone 3gs.just updating to ios5. am at the stage where I chose to restore iphone via itunes. sync seems stuck at step 7 of 7: syncing artwork. Is this necessary and if not how do I get around it?
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
Just updated via the creative cloud app and now lightroom won't even load.
As the title states:
I've just updated via creative cloud app, ran lightroom from the standard shortcut on m desktop and got 5.7. Exited that and tried to run from the new shortcut. No load.
Thought it might be to do with still having 5.7 installed, so uninstalled that via creative cloud app and it still wouldn't load. Noticed that the creative cloud app still showed lightroom as being installed (5.7 had disappeared on first uninstall). Selected uninstall again and this time it went from the installed section of the app to being an option to install.
Installed new version and it won't load.
Could someone please advise how to resolve this as I would like to be able to access my files and the changes I made.
Thankyou in advance,
MattModerator:
Please note. The solution posted to sign out of and back into creative cloud app appears to have worked
I didn't see that before writing this post. -
Just updated to iCloud, but I can't find the 'purchased' list on the iTunes store on my iPhone. There's no button for it on the toolbar or under the 'more' option. Want to play/download my puchased music via iCloud on my iPhone.... Help someone please?!
Hi again Limons,
just got your last reply per mail, re: 'presently only available in the USA.'
Unfortunately, you're right. Just found this article: http://www.digitalmusicnews.com/stories/061011icloud
seem like it's going to be a while before this gets sorted out . . .
Frustrating outcome to my question, but thanks a lot for helping me sort out what the problem was :-)
All the best to you. -
I just updated my iPad 3 but myI just updated my iPad 3 but myiPhone 5 keep giving me a error message. I don't have permission to access the requested resource, from iPhone and via my Apple Mac??????
If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback -
Hello,,just updated to LR CC today via Creative cloud,,but it is still the same LR as before,,what do i have to do?? Chrisitan Wig
Sign out from creative cloud desktop application and sign in back.
-
I have just updated my iPhone4 via iTunes, but the phone took so long to restart the program no longer recognises it. How can I reinstate the iphone with iTunes?
Hello Di57
If you are having issues with your iPhone not showing up in iTunes, then check out the article below to resolve the issue. Also check your iPhone to see if a prompt is asking to trust your computer.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G.
Maybe you are looking for
-
Unable to run project - Illegal Character
Hi, when I try to run the project with Ctrl+Enter, I receive the following alert. I think it has something to do with workspace but I do not know how to solve the problem. Can somebody help me to solve this problem. Thanks a lot.
-
My iphone does not recognize saved contact number while having incoming calls due to country and area code as auto prefix. How do i fix the problem. How do i ensure that the phone recognize calls with and without the country and area code. Please tex
-
Adobe Premiere Elements 10 install disk missing
Adobe Premiere Elements 10 Win bought/register it on July 16, 2012 and now i miss disk 2(64bit install disk ) ,is there a other way of installing it greetz morris langeveld
-
Hi, I have an Application with a JavaFX UI that uses ListView together with a custom cell factory method. The items property of the ListView is bound to an array of data objects. Based on an external (network) event, the list is modified. The modific
-
Hi, I need to speed up a process where we call function module SD_SALESDOCUMENT_CREATE in testmode only to get the pricing (conditions) determined. This is far far to slow. I do not want to replace it with a BAPI - this will be far to slow as well, b