Just update iTunes to 10.6.0.40. Now does not detect my iPhone. Tried restart, different USB port. Now what?

Just updated iTunes to 10.6.0.40. Now it does not detect my iPhone (prompt says reconnect, could not detect). Tried restarting and different USB port. What next asside from system restore with my Windows 7.Cannot Sync or get photos. Have 3Gs with os4.

I removed iTunes completely, then reinstalled. Still not identifying phone. When iPhone connected, prompt says "iPhone detected, could not be identified properly. Unplug and try again." Still not working.
Tried by installing previous version of iTunes (10.5.0.142) which did worked. Would not open iTunes because it had been previously installed with a newer version.
Sucessfully reinstalled ver 10.6.0.40 again. Then tried again by removing iTunes, iCloud and QuickTime. Reinstalled iTunes 10.6.0.40 and same problem, detected iPhone but could not identify properly. What next?

Similar Messages

  • Just updated Itunes to 11.1.4.62 and no longer synchs to iphone

    Just updated Itunes to 11.1.4.62 and no longer synchs to iphone. Did reinstall, removed old itunes, rebooted, rebooted phone, stopped ipod service, started ipod service. Every variation fails to show iphone 4s in new itunes update. Really getting fed up with itunes and updates that cause more drama than benefits. If this continues I will switch to Android Windows 8, not vista as listed below

    SOLVED:
    refer to this forum if in need: https://discussions.apple.com/message/24603547#24603547

  • Hi; I updated my iTunes to the latest version (11.1.4.62), but it does not detect my iPhone 4s any more.

    Hi,
    I updated my iTunes to version 11.1.4.62, but it does not detect my iPhone 4s any more. I have tried the following ways but still did not work:
    Rebooted the computer
    Rebooted the iPhone
    plugged and unplugged the USB cable multiple times and to various USB ports
    Uninstalled and installed the i-Tunes
    Signed out the iTunes and signed in again
    my USB cable and ports are all ok
    my ios version on iPhone is : 7.4.4
    my laptop os is windows 8.1 and my processor is: Intel Core i7-3610QM @ 2.30 GHz
    I appreciate your help.

    I find this on another post and tried it.  It WORKED.  I had to modify to fit my situation but give it a try.  Good luck.
    Go to Windows 8.1 Control Panel.
    Go to Hardware and Sound; Devices and Printers; Device Manager; Portable Devices (look for Apple IPad)
    Right-click, then select properties on the menu list.
    Under the "Driver" tab menu, confirm the update driver button is not greyed out.  If the update driver button is grey and unselectable, you need to select and click "Change Settings" button located near the lower left corner.
    Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button.
    Select "Update Driver".
    Select and click "Browse my computer for driver software".
    For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. 
    Click Next, and let the driver re-install.
    iTunes  11.1.4.62 should open automatically if your iphone is connected already.

  • I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    Hi, M_ghaderi.  
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • My MacBook Pro doesn't recognize my new iPhone in iTunes.  It recognizes it in iPhoto and automatically uploads my photos.  I have restarted the computer, checked for updates, tried a different USB port. Help please :-)

    My iTunes isn't recognizing my new iPhone as a device.  iPhoto recognizes it and uploads my pics.  I've restarted the computer, updated itunes, tried a different USB port.  Help please.

    Does iphoto launch as soon as you connect your device?
    If yes, did you try to disable the camera notification? iPhone and iPod touch: Disabling digital camera notification in Mac OS X

  • ITunes 10 does not detect my iPhone

    i recently upgraded to itunes 10, and i have a 1st gen iphone. after upgrading, i synced my iphone and everything went fine. soon after that, i had a totally unrelated hard disk drive failure. luckily all my data were backed up, apple replaced my hard disk, and i restored all my data. however, when i tried to connect my iphone to itunes to sync, itunes would not detect the iphone. i tried many fixes, the only one that worked was to reinstall itunes 10 (which is a pain, because you have to get rid of lots of files.) last night, after reinstalling itunes 10, i connected my iphone and itunes detected it and synced. i thought the issue was solved for good and maybe was related to the restoring of the backed up data. however, i just tried to sync again, but the problem has re-appeared. my itunes does not detect my iphone.
    the console message i get is as follows:
    9/7/10 3:56:17 PM usbmuxd[30] connect_toport (thread 0x100581000): Could not connect to USB mux port 32498 for device 2: Connection refused
    9/7/10 3:56:17 PM usbmuxd[30] MobileDeviceConnectlocked (thread 0x100581000): Could not connect to lockdown port on device bac8e3086978950d97c077103aa8996ccb56eec1.
    9/7/10 3:56:17 PM usbmuxd[30] _MobileDevicePairWorker (thread 0x100581000): Pair worker (0x0x100581000) could not connect to lockdownd: kAMDMuxConnectError
    i thought that usbmuxd is built for linux, but is it doing in itunes 10? but it must belong to it, because i also got this (i think when booting, but i am not sure):
    9/7/10 3:33:40 PM com.apple.usbmuxd[30] usbmuxd-201 built for iTunesTen on Aug 12 2010 at 17:33:03, running 64 bit
    what is going on? i don't want to reinstall the **** itunes every time i have to sync. any solution? thanks

    Here is the diagnostics test ran within iTunes (under help tap inside iTunes).
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    Dell Computer Corporation Dimension 3000
    iTunes 10.0.0.68
    QuickTime 7.6.7
    FairPlay 1.9.16
    Apple Application Support 1.3.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.2.0.47
    Apple Mobile Device Driver 1.49.0.0
    Bonjour 2.0.3.0
    Gracenote SDK 1.7.1.420
    Gracenote MusicID 1.7.1.78
    Gracenote Submit 1.7.1.106
    iTunes Serial Number BXXXXXXXXXX
    Current user is an administrator.
    The current local date and time is 2010-09-17 01:08:36.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is disabled.
    HDCP is not supported.
    Video Display Information
    Intel(R) 82865G Graphics Controller
    ** External Plug-ins Information **
    No external plug-ins installed.
    iPodService 10.0.0.68 is currently running.
    iTunesHelper 10.0.0.68 is currently running.
    Apple Mobile Device service 3.2.0.0 is currently running.
    ** Device Sync Tests **
    *No iPod, iPhone, or iPad found.*
    Please help!!!!!!

  • TS1363 iTunes does not detect my iPhone, sends error message, please help

    iTunes does not detect my iPhone when I plug into ligthening cable- error message 0xE8000084 appears, please help

    Hello Brian,
    Here is an article that should point you in the direction of a resolution. It has a section about the OXE errors.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Unknown Error containing "0xE" when restoring
    To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
    All the best,
    Sterling

  • After I updated to iOS 5, my computer does not detect my iPhone 4. Not only that, all my backed up data was erased. =/ I cannot even sync my iPhone if it is not detected. What can I do?

    After I updated to iOS 5, my computer does not detect my iPhone 4. Not only that, all my backed up data was erased. =/ I cannot even sync my iPhone if it is not detected. What can I do? The USB ports are working. It is fully charged. I have restarted the phone and computer various times. But nothing works.

    There is no way to consolidate iTunes accounts.
    Setting up an iPhone has never required creation of a new Apple ID.
    You've apparently purchased content with both Apple ID's.  Sign into the device with the correct Apple ID and sync the content.

  • My iphone4s does not turn on,when I connect to power ,it shows the message "connect to itunes" but when I connect to iTunes,my pc does not detect my phone,so iTunes does not detect my iPhone.

    My iphone4s does not turn on,when I connect to power ,it shows the message "connect to itunes" but when I connect to iTunes,my pc does not detect my phone,so iTunes does not detect my iPhone.

    Are you running the most recent version of iTunes for Windows on your PC?  You may be running an older version that is incompatible with the 4s.
    Hope this helps

  • Itunes on my Mac 10.4.11 does not recognize my iphone

    itunes on my Mac 10.4.11 does not recognize my iphone 4S
    also, once I plug in my iphone, it is recognized as a camera, but nothing to do with music.
    if i have to upgrade software, how do i do that?

    You get Mac OS X 10.5 on DVD if you have a PowerPC G4 or G5 Mac, or Mac OS X 10.6 on DVD if you have an Intel Mac. If you're using a G3 Mac, you need a newer computer.
    (66587)

  • Got an (unlocked) iphone 4s from US and tried activating in India but it throws an error saying 'unable to activate bcos the activation server cannot be reached' ..I tried connecting to itunes through my laptop but it does not detect my iphone..pls help

    Got an (unlocked) iphone 4s from US and tried activating in India but it throws an error saying 'unable to activate bcos the activation server cannot be reached' ..I tried connecting to itunes through my laptop but it does not detect my iphone..pls help

    mithaani wrote:
    Got an (unlocked) iphone 4s from US
    As kb1951 states, unless this phone was purchased directly from Apple, it is not officially unlocked. In the US, only Apple sells officially unlocked iPhones. The message you got generally means your phone was hacked to unlock it...jailbroken...Apple's servers have detected such & are preventing your phone from activating...there's nothing wrong with the activation servers.
    You'll need a sim card from the carrier your phone is locked to in order to activate it. If you don't know what carrier, you'll have to call AppleCare in the US to determine this info. Be aware, US carriers will not authorize official unlocking unless you are a customer that used the phone on their network. Thus, there is most likely no way for you to get this phone officially unlocked.
    Good luck.

  • My sony vaio laptop with windows 7 ultimate OS does not detect my iphone thru itunes 11.1.0.126. Any suggestions how to fix this?

    my sony vaio laptop with windows 7 ultimate OS does not detect my iphone thru itunes 11.1.0.126. Any suggestions how to fix this?

    windows 8 has been out long enough to have fixed this issue you would think  Its bad enough my last computer hard drive went out and i lost all on it but now i cant backup my phone so if I lose it or something happens to it Ill be in bad shape  lol   PLEASE fix this issue!!! Too much info to store on Icloud but could be apples way of getting people to use the icloud and buy extra storage on icloud

  • Itunes does not detect my iphone all of a sudden

    all of a sudden my itunes does not detect my iphone. i have switched both machines off and on and still no detection. please any help will be great

    Type "iphone not recognized in itunes" into the search bar at the top of this page by "Support".

  • Itunes 11.1.4.62 does not detect existing iphone or ipad

    Just downloaded the above, and now on plugging in either my existing iphone or my Ipad via wired USB connection, itunes does not detect the device.  Running windows 8.1, Tried updated iphone software to match as well, still no detection.  Am I missing something on the new version in set up or something, or is it an uninstall and reload?
    Thanks

    Have tried different cables as well

  • My itunes does not detect my iphone

    Does anyone have any tips on how to get itunes to detect my iphone 4.  Apple store just recently replaced a troubled iphone 4 that i had and now itunes does not detect the newly replaced one.  I have the latest iTunes update. 

    Refer to the troubleshooting suggestions here: 
      http://support.apple.com/kb/ts159
      http://support.apple.com/kb/TS1538

Maybe you are looking for

  • Problem with saving config on asa 5505

    I have asa 5505 with 512mb , i am trying to save ios on it but i failed many times , I have sandisk 2GB and i formatted with windows on fat but every time i see disk0 failed , any ideas what is the problem ? Thanks                  

  • Oracle9ias R2 RHAS2.1 installation problem

    hi tried to install oracle9ias r2. i follow below docs doc id:215288.1 doc id:191567.1 doc id:200471.1 in the metalink. searched metalink and found a code. "pre-install check for linux system " there s code written for specific platforms. i run it an

  • Migrating Deprecated Code in 9.2

    Hi all, I have begun an attempt at removing as much (if not all) of the code in this legacy project I have been working on that has been deprecated by 9.2 from v8.x. I am currently having two issues: 1) Our code is acting on the type of the Node. In

  • CANNOT CHANGE PLANNING DATE

    HI GURUS, We posted a SD document 180000XXXX Base line date 16.12.2008 and Payt terms C003 (30 days) thE planning date must be 15.01.2009 but the Planning date is 12.01.2008. We intented change the base line date, the Payment terms and the Planning d

  • Bex query in Xcelsius

    Dear Xcelsius Experts, Im having a trouble about displaying bex query data on xcelsius. After adding a new connection i browsed my query then selected insert in area on excel. I can see my kef figures on preview tab.On the usage tab refresh on load a