Just updated and now iTunes wont start

I have just updated iMac as I havn't used it for a while.
iTunes wont start.
Any ideas?

My iMac just came back from the shop with a new logic board. It had been out of commission for a few months so I just did the the general software update.
Tried clicking from the apps folder but this didnt work either.
But....
Got a tip from another online blog and just downloaded itunes from the apple site and reinstalled it. This fixed the problem. Had to do the same with Quiktime as well as it wouldn't open all movie types.
Thanks for your help

Similar Messages

  • Just installed the update and now iTunes wont open! Help!!!

    Just installed the update and now iTunes wont open! Help!!!

    See also Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Mac book pro downloaded software update and now it wont start. Ideas?

    macbook pro downloaded iOS6 and then when I rebooted i get a blank screen with apple logo and 3 beeps. What to do?

    Three beeps on startup usually indicates bad RAM. Have you replaced your RAM modules recently? One or both modules may have just failed. The best thing you can do is take your machine to your local Apple Store or AASP and have them run diagnostics. I don't think it would have anything to do with an iOS download.
    Clinton

  • My itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens

    my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.

    My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Download new itunes update and now it wont let me sync

    Download new itunes update and now it wont let me sync. Keeps saying I need 26gb of free space which it didn't say before I downloaded the update. It doesn't make sense. It keeps saying:
    The iPod cannot be synced because there is not enough free space to hold all of the items in the iTunes library. (additional 26gb required)
    This makes no sense because before the new itunes update there was no problem with me not having enough space. I have 5gb of free space now and I had 5gb of free space before I downloaded the itunes update. Nothing should've changed. And I should not need an extra 26gb of space. How do i fix this problem so I can my ipod normally again.

    Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
    Come back with the results.
    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    and as necessary:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I downloaded the update and now it wont work.

    I downloaded the update and now it wont work. It just shows me a screen with a lightning chord going to the Itunes icon. Am I supposed to plug it into my mac or something?

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • I downloaded the IOS6 update and now it wont connect to my home wifi HELP PLEASE!

    I downloaded the new update and now it wont conect me to my home Wifi PLEASE HELP! when i click to connect with my wifi it brings up this apple page saying" try another search the page i searched for cannot be found" idk what to do!

    Have you tried starting FF in safe mode and then disabling all add-ons and extensions?
    Then restart the browser enabling each add-on one by one. I did this and found that Stumbleupon toolbar was the problem for me as my browser was freezing as soon as I started it and going into not responding but with this currently disabled the browser works fine. Just hope there is an update for Stumble soon.

  • Satellite U400-14B shuts itself off and now it wont start up

    Hi
    just got a new Satellite U400 this week.
    Was working perfectly the first few days, then last night, it just shuts itself off and now it wont start up.
    I press the on button and the row of lights next to it light up, but nothing happens I dont even get as far as the Toshiba screen.
    I have tried many things. I left it plugged in overnight, tried taking the battery out and no result as of now.
    The little led lights on the bottom indicate that there its plugged in, the battery is white not orange, when pressed they all light up again only for a split second.
    The only thing I can liken this too is when a car wont start and you keep turning and turning the key, well in this case pushing a button, and nothing happens, the fans dont whir or anything...
    help please...

    Has extra Memory (RAM) been installed? Try removing one Memory Module and try a different Memory Slot.
    If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.

  • I took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer. how do i get it to finish updating or turn on?

    i took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer and it just has the apple icon on the screen. how do i get it to finish updating or turn on?

    Why would you do that when your phone is updating?
    Your phone is in recovery mode If you can't update or restore your iOS device

  • TS3212 i down loaded the update and now it wont open says im missing this file msvcr80 dll

    i down loaded the update and now it wont open says im missing this file msvcr80 dll

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99685)

  • HT1369 Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed and mobile programs associated with my non apple cellpho

    Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.

    I had this problem too and my roommate solved it!
    Go to 'Settings'
    'Music'
    Scroll to the bottom and enter your password to log onto your home sharing
    Then connect to iTunes and sync!

  • I thought I was installing an update and now iTunes will not open? HELP!!!!!, I thought I was installing an update and now iTunes will not open? HELP!!!!!

    I thought I was installing an update and now iTunes will not open on my computer... HELP!!!!

    Others are more likely to help if you stop needlessly repeating yourself and provide some details.
    What operating system? Windows (XP, Vista, 7) Mac
    Any errors?
    Also, try doing a search either here or via Google, you are more likely to get a faster resolution as there is no need to wait on others to respond.    

  • My iphone crashed during the update and now it wont recover.

    My iphone crashed during the update and now it wont recover. I keep getting a message say " an iphone has been found thats in recovery mode, please restore it and update."
    Every time that i try to restore it, is stops with a couple of minutes left and gives me the same message.
    can anyone help?

    How many times have you tried...?
    Some Users have reported that as many as 8 or 9 attempts were necessary before success.
    See Here  >  http://support.apple.com/kb/HT1808
    Be sure to Follow ALL the Steps...

  • I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?

    I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?

    Hey Todd Rubenson,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows unexpectedly quitting. The following resource may provide a solution:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

Maybe you are looking for

  • How to replace a component in the JPanel?

    Hi, I want to replace a component in the JPanel. My panel has GridBagLayout. Thanks in advance.

  • Error in saving file. this is an usual error.

    "error in saving file. this is an unusual error. perhaps some computer maintenace is required" This notice keeps coming up whenever i try and save an audio file, which i have generated with "final vinyl". I have no idea what to do next. If anyone has

  • Exceptions

    Hi everybody in the fourm, anyone knows which exception would thorw this? MAny thanks in advance: try {              amount  = Float.valueOf(text.getText());         } catch(????){              JOptionPane.showMessageDialog(frame,                    

  • I want to launch multiple scripts written in Java from command line

    Hi, I have created a Master script file (script.java) which call functions available in other class files. (created through Java code). Now, let's say I have 10 functions(scripts) on master script file but I want random selection for executing these

  • Email on creation/change of  bid invitation and auction

    Hello, I have configured SRM 550 release , unable to send bid invitation mails to bidders on document( like bid invitation/auction) cretaion/Change . But able to send mails on additional Output Requested via email ,this is after selecting bidder and