Just updated iphone to 3.0.1 and now i cant connect to internet
i just accidently updated my partners iphone to version 3.0.1 now every time it tried to connect it flashes up the message 'could not activate cellular data network: You are not subscribed to a cellular data service'. I have tried resetting all settings, and the o2 signal bar is at full strength. any suggestions?
i have had the same problem, souonds like a version issue, anyone know how to fix this issue?
Similar Messages
-
I just updated my iphone4 to iOS5.1 and now I cant use my 3g, everything on my cellular data's right but I cant activate my 3g anymore, can you help me please? thank you! i really need it
Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data doing a reset.
If this does not work, set it up again as new device, without using the latest backup afterwards.
How to back up your data and set up as a new device -
i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network
i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network
-
I just updated my software to iOS 6 and now can't connect to the internet
I just updated my Ipad 2 to iOS6 and now can't connect to the internet. Is anyone else having similar problems?
Swipe up or drag up on the app window to close the app.
-
I'm having problems connecting my iphone to itunes. I have the Itunes on my computer but it wont register my phone is connected... Can anyone help please? xx
If your music was purchased within iTunes, then you should be able to get your purchases restored. If it was music you imported, then you must re-import the CD's. So sorry that you lost it all. Most people never back up their data.... even when they talk the talk but never walk the walk. 3 copies, and rotate them. son, father, and grandfather (Old school stuff but if you have a bad disc, the other saves may be your rescue!)
Good luck... -
Unable to connect to the internet after upgrading software on my iphone 4S to IOS 7.0.2
try a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
You can also try - settings - general - reset - reset network settings. -
I just updated my Iphone 4 to the IOS 6 update and now i cant connect my iphone to Itunes because apparently my itunes is out of date? and then when i try and update itunes it says i need a new OS completely is there anything i can do???
Are you running Leopard on your Mac, Laurie?
If so, try instead updating to iTunes 10.6.3.25. (That supports earlier models of iPhones running iOS 6, even though it can't run the new iPhone 5s.)
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3 -
I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?
Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help. -
I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
I just updated iTunes to the latest version and now I can't play more than half of my songs. When I click on a song it comes back and states that it can't find it and prompts me to try and locate it. I don't know where to look. Help!!!!
Hi ldhong,
There are a few ideas in this article on how and where to look for missing iTunes media:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Hope this helps!
- Ari -
I just updated my iTunes to 10.5 and now when I plug in my iPod touch and iPad it won't sync or even recognize them? Help!
having the same problem, my wifes is just fin and mine is invisible
-
Just updated my iPad 2 to ios7 and now my screen resolution is terrible...
I tried rebooting several times, but it didn't help. Everything else seems to be working fine. Any suggestions?
Diavonex
This helped meRe: Just updated my iPad 2 to ios7 and now my screen resolution is terrible... Jan 4, 2014 10:50 PM (in response to Batsy2000)
Try restore iPad
http://support.apple.com/kb/ht1414
Backup before you do it.
Just tried this...did not work. Resolution is still horrible. This is not an issue of it just not looking smooth or sharp. It's so much worse than that. It was actually fine right after the update. The next morning when I turned it on it was messed up. -
I updated iphone 4s to 7.02 and now cannot access icloud server.
I updated iphone 4s to 7.02 and now cannot access icloud server.
One of these:
Restart:
1. Press and hold the Sleep/Wake button until the red "slide to power off" slider appears, and then slide the slider.
2. Press and hold the Sleep/Wake button until the Apple logo appears.
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414 -
Just updated my iPad it shut off and now say connect to iTunes and when I connect it it says restore ipad hit that button and says that it can't restore
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
I just updated to OS 10.9.1 and now my e-mail messages (I use gmail) only sit in my outbox. Has anyone solved this problem?
Yes closing Mail and reopening it does then allow the message to go out but I can clearly see that is going to be rather difficult with sending abut 20-30 emails a day! One observation is that it seems to happen more often with attachments.
Maybe you are looking for
-
when I used the following function module for user defined file path selection parameters: p_file like rlgrap-filename. AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE. CALL FUNCTION 'F4_FILENAME' EXPORTING PROGRAM_NAME = SYST-CPROG DYNPRO_NUMBER =
-
Transfering iTunes from small Portable HDD to 1TB HDD - Losing ratings etc.
I have a 40gb portable HDD, this ran out of space so I purchased a 1TB portable HDD as I do a lot of design work and Music is outgrowing the 40gb HDD. After transfering it all over, little explaination marks flag up every time you click on a song. I
-
06528. 00000 - "Error executing PL/SQL profiler"
HI. i am getting an error - ORA-06528: Error executing PL/SQL profiler ORA-06512: at "SYS.DBMS_PROFILER", line 258 ORA-06512: at line 3 06528. 00000 - "Error executing PL/SQL profiler" *Cause: An error occurred in during execution of a PL/SQL prof
-
New entries created for RPTQTA00 with the same data
Hi, Whenever I run RPTQTA00, it creates a new record in IT2006. If i run the report again, another record is created with the same data. How can i prevent this? It should only update the existing record. thanks, Steph
-
Item 000090 Delivery Split due to conflicting header data (FKAIV - IV)
Hello, I am getting the above message. I would like to know where can I find the Inter Co Bill type (FKAIV) for the materials, so that I can see where it is different. P.S. I am an ABAPer.