Just updated my iMac OS X 10.9.5 but my pages is screwed up cannot get some documents
I am having issues with my iMac it automatically updated September 24 and NOW I CANNOT get some documents in Pages they are LIGHTER in color. Please help it says update to another software because my cloud is not compatible ???
Did you install iOS 8 on a mobile device and upgrade to "iCloud Drive?" If so, your "Documents in the Cloud" are no longer accessible from the iWork applications, and won't be until you upgrade to Yosemite, which will be released sometime during the fall. You can still access them by signing on to icloud.com and using the web version of iWork, which is not much worse than the actual applications.
Similar Messages
-
just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Just updated my iMac to OS X Yosemite and my Photoshop will no longer open. Pop up message informing, Some of the application components are missing from the Application directory, Please reinstall the application. I have the pay monthly package and don't know where to start.
Do as it says: Reinstall the program. Run the cleaner tool and let CC app do the magic.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
Just updated to 8 & now I can not open any web pages as well as firefox will not close out, it still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.com/kb/Firefox+hangs
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click and hold shift key and be able to get to it. Anyone figured this out?
The "legacy" metadata editors, for which there was a "back door" in iTunes 12.0, have gone from 12.1. However, the revised editors in 12.1 provide access to (almost) all the metadata elements that were available in iTunes 11, albeit in a different layout and with some additional constraints based on media kind. Some users have / will have an issue with the statement that "Get Info has been completely redesigned in iTunes 12 to focus your attention only on what’s necessary for the selected item" since that removes some metadata elements that people may have been using in creative ways. iTunes 12.1 basically gives you access to the fields that Apple think are necessary ... . Some of the things that have been excluded by this rule:
track and disc number fields for video media kinds
show and episode fields for music
description tab for audiobooks made up of more than one file
Obviously the first two examples can be regarded as "overloading" the metadata elements - i.e., using them in ways that the designers didn't intend - but given that some users do find valid cases for this it's a shame that they've been deprecated in the new UI. There are couple of workarounds:
in songs view (or any of the other columnar views), you can still select any fields to display, independent of media kind, and these can be edited (though only one at a time) by double-clicking in the relevant "cell"
you can (temporarily) change the media kind of an item (or group of items) to get access to metadata elements that would otherwise be inaccessible.
It may be worth submitting an issue via https://www.apple.com/feedback/itunesapp.html - I can't see it as a huge development task to have a user preference to switch between "show all fields" and "filter fields based on media kind".
One other oddity/irritation is that some of the tabs don't, by default, show all the available fields - you need to scroll up/down to access them or to expand the window by dragging on one of its corners. Fortunately, the latter seems to be persistent - once you've done this to make all the fields visible the editor will open at the same (larger) size when opened again. -
I have just updated to 10.7.3 and safari always reloads previous pages I have been on every time on open it, my home page is set to google yet it always reloads from the history, how do I stop this
There is a setting in the System Preferences for this as well that may be causing it. Go to System Preferences>General>Restore windows when quitting and reopening apps - at the bottom of the window under Number of Recent items. Remove the checkmark from that setting.
Also - if you close all of your windows when you are done with Safari - it should open to your home page. -
Hello,,just updated to LR CC today via Creative cloud,,but it is still the same LR as before,,what do i have to do?? Chrisitan Wig
Sign out from creative cloud desktop application and sign in back.
-
so i just updated my iPhone 4 to the iOS 7 but now the screen on my phone is saying "Could Not Activate Phone" So what should I do i need this fixed now
Can someone please tell me what to do. I need for something in 30 minutes
-
HT1414 just updated ipad to latest software version. finding wifi but will not connect
Just updated ipad to 6.1. Finding wifi but not connecting.
1. Turn router off for 30 seconds and on again, this will refresh the IP address of the iPad.
2. Settings>General>Reset>Reset Network Settings
3. Try changing router security e.g. WEP/WPA/WPA2
4. Have you updated router firmware? -
I have just updated my iphone 4 to OS 6.0, but since then I can't access my emails as when trying to open a particular email I am presented with a blank screen. Other apps such as facebook and ebay take an absolute age to open.
Is anyone else having problems? what can I do to put it right?I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems. -
Adobe Cloud is installed on my desktop and one laptop computer. Upon noticing updates were available yesterday, I successfully installed them on my laptop. Today, I cannot get Abobe Cloud to open on my desktop.
We don't know what Apple plans on doing to change this (and it may not be just Apple but more likely the publishers, since Apple would, of course, do whatever it could to maximize sales/profits). Right now you can only read Apple books on mobile devices. Sure, buy them from Amazon if you want to read them on the computer. We don't work for Apple so we're pretty impartial on this kind of advice.
You might also see what your library can offer. My wife can browse the county library from her iPhone, borrow e-versions, and read books on it too. Free! -
I just purchase an IPhone5C to upgrade from my IPhone4, but I do not know how to get all of my photos that were on ICloud on my Photo Stream (875 photos), on to my new phone. I thought that since my 5C can see Icloud that all photos would be there... Can someone help me get the pics from my Iphone4 to the 5C?
Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device. -
App store tried to update iBooks app. I can only see Newstand app on my screen and cannot get to bookstore. How can I delete and download the iBooks app again. iBook still appears in the settings menu as version 2.1
Tx
iPad 2, iOS 5.0.1, iBooks 2.1Hi,
the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1). -
I have just update my mac mini server to OX Yosemite, but now the iTunes is not working at all.
I have just updated my Mac Mini Server (Mid 2011) to OS Yosemite ver 10.10, after the update, iTunes is not working, and i have tried to reinstall iTunes over and over again but it was not successful , please advise if you have a solution or share similar problems. Thank you.
You have to upgrade to 10.6.8 to be able to download iTunes 10.7 or 11. The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard.
The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion.
The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion. -
I have just updated my new iPad to Iso 6, and when the iPad came back on, I cannot find the Utube icon?
Is it still on my iPad?
If so where will it be, or how can I get it back on?
Thanks.Apple removed the YouTube connection. Google has an app you can use but it needs some work.
Maybe you are looking for
-
How can I plug my iphone into an MP3 inlet? Is there an adaptor I can buy?
I have a scooter that has a sterio with MP3 and speakers, can I use my iphone somehow to listen to the music??
-
S2S VPN only works in one direction
I'm very new to cisco devices but we recently acquired a catalyst 2911 device for our co-lo cabinet and I am trying to get a site-to-site vpn connection working between the facility and my offices network as well as a remote access VPN for me to use
-
Issue with Shared Services 11.1.1
Hi all, I have an issue with the shared services in version 11.1.1. When i am trying to click on the Application Groups on the left pane in the console, an error message has been displayed as " A communication error has occured while loading the view
-
Hi , I have a Nokia C3, wherein the in-built chat application does not open up and gives error after checking for new Chat updates as follows: "Could not connect to the network. Check your phone's connection settings and try again" !! I use a relian
-
Hi I am getting tns error below .we noticed that queries are disconnecting in between execution with ora-3113 error.I am getting error in sqlnet.log in server side VERSION INFORMATION: TNS for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Produ