Just updated my Samsung S5 and now I have no service
This is absolutely ridiculous. along with this, my phone continuously restarts every 5 minutes
First try doing a System cache clear and the other would be the factory data reset. In some cases the system cache clear will work and at other times not. Even the FDR will not solve all issues in all cases. Your issue is a known 5.0 problem on this forum. We can only wait for an update but at this time their is no word of or any official release date for one. I would urge you to contact both Samsung and Verizon at the Corp management level.
Similar Messages
-
HT202157 Just updated to 5.1 and now I have no audio. Any suggestions?
Just updated to 5.1 and now I have no audio. Any suggestions?
hold down home and on button until the slider show then slide it to turn the device
off when it's off you press on button to restart it from scratch -
Verizon message to update my Samsung S5 - so I did and not my email is broken. Get message - unfortunately email has stopped. How do I fix this? I've shut down, restarted - nothing ... help!
A complete pain but this solution appears to have worked. Thank you for your help
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.
Hi again, when you clicked on Mountain Lion and Lion in the App Store you are telling the laptop to reinstall them both.
You may have allowed simutanious downloads checked at the bottom of the window, I don't know, but I expect Mountain Lion is downloading, so Lion is waiting for it to finish, so if you have Mountain Lion installed cancel both download's.
Cancell both downloads anyway.
Go to the apple logo , top left, click on it, then click on about this mac, a window will open telling you what's installed, Mountain Lion is OX 10 version 10.8.2 click on more info, to find out more, Lion will be OX10 version 10.7.4.
Only update were it say's check for updates, not download now. -
Just updated itunes 10.5 and now it won't open at all please help me
Just updated itunes 10.5 and now it won't open at all please help me
Already a thread about this problem. Check to see if any of the given solutons here work for you.
https://discussions.apple.com/thread/3381033?start=0&tstart=0 -
I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod? -
I just updated my macbook pro and now every time i go to youtube it tells me I have to download the new version of adobe flash player so i do and it still wont let me play it ..
Assuming Allan's advice is not correct, and you do run the installer, I think I've heard of that problem and it involves removing the old Flash plug-ins, then install the new version. I don't use it so I don't know what they are called, but will be the /Library/Internet Plug-ins folder.
You can go here and enable HTML5 in YouTube so you don't have to use Flash: http://www.youtube.com/html5
Most(?) of the content is HTML5, but you may run into videos where you still need Flash. -
i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???
capriz wrote:
i have just updated my old 3GS ...
To what... iOS 7 is Not supported on the 3 GS -
Just updated to 7.1 and now open some apps and cannot see the entire screen because the iPad, time n battery icons are covering top of screen.
I tried what you said but it still didn't help.
It only affects some of my apps other apps are fine.
For some reason in some of my apps the iPad, time and battery icons get bigger on the top of my screen so I can't see the top of the app page which effects some of the games and applications.
Is there any way to turn these icons off on the top of the screen? -
I just updated my 3g phone and now my apps are gone how do i get them back
I just updated my 3g phone and now my apps are gone how do i get them back
Aren't they in your iTunes library? If so, sync them back to your phone. If not, redownload them (http://support.apple.com/kb/HT2519).
-
I just updated photos on Yosemite and now iPhoto is gone. How can I get it back?
I just updated photos on Yosemite and now iPhoto is gone. How can I get it back?
What were you running before you updated? 10.10.2, or an earlier version of OS X (10.9 or earlier)?
If 10.10.2, then iPhoto should still be on your machine. If not, then go to the App Store, purchased tab, and look for iPhoto, and download it (you'll need iPhoto 9.6.1 to run on Yosemite).
If you never installed iPhoto from the Mac App Store, then you should contact AppleCare, who can probably help you out. That's the only option in this case; upgrading from 10.9 or earlier straight to 10.10.3 is a bad incidence of timing. -
I have just updated my Iphone 4 and now I can't get into it as it is asking for a passcode which I don't have. Can anyone help?
Did you get this device 2nd hand?
-
I just updated my IOS software and now I cannot update or purchase Apps. A message appears that I have to change my App Store from Nicaragua to the US. How do I do this?
Change to Canadian App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again. -
I just updated to Mountain Lion and now I notice on the side bar under "shared" an icon of a computer. It states that it is a memory card. What is this? I can't seem to open it. FYI: my wifi router is password protected. Thank you!
Do you have a printer that has a memory card slot on it?
-
I just updated to Itunes 10 and now when I drag a podcast to play on my 3rd Generation Ipod Shuffle, the podcasts won't play as as part of the music list. I know you must add the podcasts manually by dragging them and dropping. I did do that. I know that you can only use the Ipod in order not random. So, it must be a problem with the new software?
Thanks.Do you have any better luck with that if you update to iTunes 10.6.1.7?
From the notes for the release:
iTunes 10.6.1 provides a number of improvements, including:
• Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
• Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
• Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
• Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
http://www.apple.com/itunes/download/
Maybe you are looking for
-
Music files missing/hidden in folder on network hdd
Hi all, I have setup my home net work with a iMac (mountain Lion) backed up by a TimeCapsule and at the back of the TimeCapsule I have a 2TB networked external HDD. My iTunes library is located on this HDD, I take care not to start up iTunes before t
-
All of the inserts in audio tracks have stopped working
I do get audio input, but the inserts do not work. Does anyone know the fix for this? Thanks, Murray
-
Problem with the program Wine.
Well, I'm trying to install this program called Wine, a program that allows you to run Windows programs on a Mac legally, and currently I followed these steps: 1. Download Mac Ports and install it. 2. Enter: echo export PATH=\$PATH:/opt/local/bin:/op
-
UME connected to Active Directory. How to change what fields are available
I have successfully changed my UME to point to Active Directory. I'll describe process further on in post. My issue now is how to modify what AD fields will be available in UME and what UME fields they'll be 'mapped' to. I'll try to describe the proc
-
Putline using newline only instead of cr/lf
we're moving from HPUX 10.2 to HPUX 11.0. Our code that uses put_line used to put a cr/lf at the end of every record on HPUX 10.2 but now it is only using lf on 11.0. HELP!