Just updated, now Muse says it's not connected to web
Updated to V 7.3 Build 5 CL782274 Muse CC. Now when I open Muse it says I must log on to the internet, then says internet is not connected. Obviously I am because I can contact Support. What's going on here?
Please refer to this thread :
http://forums.adobe.com/message/5696986#5696986
Thanks,
Sanjit
Similar Messages
-
once again I am trying to download the new update 8.1.3 and it says I am not connected to the Internet which I am. Any suggestions ?
Have you tried restarting or resetting your iPad or your router?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Even though you are connected to the Internet, sometimes resetting your router can help. It's very easy to do. Just unplug it for about 30 seconds, plug it back in and let it start up. -
I am trying to install the latest software update, but a message flashes up to say I am not connected to the Internet, when I actually am! Any ideas please? Thanks
Have you tried restarting or resetting your iPad or your router?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Even though you are connected to the Internet, sometimes resetting your router can help. It's very easy to do. Just unplug it for about 30 seconds, plug it back in and let it start up. -
How do I download an update when my computer says I am not connected and I am?
Where are you trying to connect from? Your profile shows IOS 6.0.1. If you are using an IOS device, you'd have a better chance of getting a good response if you posted on that forum.
If you aren't using an IOS device, more information would be helpful. -
Won't install updates...says i'm not connected to the internet
I'm trying to install software updates. After about half hour or so, it says that not all items could be installed and I'm not connected to the internet?
Ok, so I went through System Preferences to do the update versus the apple menu. There we're a total of 7 updates - one of them being for Safari, which it said it was already downloaded. I unchecked the update for Safari and BOOM!!! Updates loaded If anyone can tell me why, that would be great. Thanks!
-
HT4623 It won't let me update cause it says I'm not connected to the Internet when I am
What do I do???
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Double tap your Home button & at the bottom of the screen you will see the icons of all open apps. You may have many open which can possibly cause the slowdown and possibly the loss of wifi. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I downloaded Pandora to my iPOD and then my wifi quit and i had to restart it and now Pandora says it is not connected to the internet. How do I get it reconnected?
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Power off and then back on the router
- Reset Network Settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
HT1222 Can not do this update. Says I am not connected to Internet but I am.
Can not get security update. Keeps saying I am not connected to Internet but I am
Check your router settings and see if you have Wireless QoS (WMM) enabled? If so, diable it. This fixed my problems, and had the benefit of speeding up my wifi in the process.
-
My printer is saying that its not connected to the internet How do i fix this
My printer is actting funny...Yesterday i printed my son a picture off the apps on the printer but now its saying that its not connected to the internet but it was just working fine yesterday i have a hp officejet 6500A Any help would be greatly appriciated
hello javy,
first i would like to ask does this happen with all apps on the printer or just the one apps you used previously ?
Also i would suggest Resetting the router that the printer is connected to and Also Power cycle the printer,
In order you would go to the Printer and turn it off, and then turn the power of the router off,, wait about 15-20 seconds and then turn the Router back on, Wait for all the lights to come back on and then what you would want to do is turn the printer back on,, basically what this does is refresh the connection from the printer to the router itself
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__ -
MY IPhone will not let me back up my phone or download the IOS 7 update because it says i do not have enough storage space. But I deleted all of my apps and pictures just to update it and it still wont let me do it. What should I do?
Contact iTunes to re-enable your account at expresslane.apple.com
You can reach them by chat or email. -
I updated my Mac Book Pro to Yosemite, now it says it's not compatible with my Cannon copier. Any ideas how to fix this problem so I can use my Cannon copier again? Thanks for any help!
If MF4150 is correct...
http://www.usa.canon.com/cusa/home
search MF4150
click >Drivers & Software
Verify or choose Yosemite 10.10 - then click the [+]
Again verify Yosemite > click agree > click [DOWNLOAD]
The rest should be self-explanatory
ÇÇÇ -
Itunes updates now it says MSVCR80.dll was not found? I have tried to reinstall itunes and keep getting this message?
Hello emeraldhopes,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
Just upgraded to iTunes 10.6 and now it says it does not support Quicktime
Just upgraded to iTunes 10.6 and now it says it does not support Quicktime. Not much more to add. It's a MacPro running Lion.
warren.b.paul wrote:
So, I have managed to fix the problem.
I found that the upgrade had replaced my library files with empty ones.
So I restored the backup I made of them before the upgrade and
now all my media is back.
Great..
For those who run across this therad and haven't taken the effort to make a backup here is another approach that should work.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.
Hello, terrygav.
I would recommend processing a reinstall of Mavericks.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason H. -
I have just done the iso update now its saying connect to i tunes buot i dont have a laptop how can i get around this?
You can't get around it. It must be restore using iTunes on a computer. If you don't have access to one, make an appointment at the genius bar of your local Apple Store.
Maybe you are looking for
-
How to restrict vendor line items to be picked to 6 in f110 payment run?
Hai how we can allow F110 programme to generate a clearing document for every 6 line items.Means if a vendor has 15 open items which are due for payment at the time of Automatic Payment Run . The System should generate 3 clearing documents. Means the
-
Execution time difference between SELECT & UPDATE statement in JDBC Sender.
Hi Experts, In my scenario, I have used the JDBC Sender Adapter with the SELECT and UPDATE statement. Now the problem is in between the execution of Select and update statement, few more entries are coming in the same DB Table. So result of this is u
-
Getting the file type from a placed file
Hi I am trying to get the file type from items placed on a page. I know the types available has one of the three interfaces "IImageAttributes", "IEPSAttributes" or "IPDFAttributes", but how can i test whether the placed image is a TIF, JPG ... Of cou
-
Photo stream won't load as screen saver
I cant get any photo streams to load as slide shows or screen savers on my apple tv. I tried it on my buddies apple tv with there own seperate photo stream and thy had the same issue. This used to work for me no problem. What's up apple? Obviousl
-
Adobe Reader for Low End PCs.
Hello, I'm an air ambulance pilot and I'm donating several desktop pcs to a rural school in a mountainous province in the Philippines. I bought them by bulk in Hong Kong and some of them are low end. I was wondering what version of adobe reader works