Just updated to LR5.4 on my mac and the Detail Panel in the Develop module is missing. How to fix?
How do you fix the missing Detail panel in the Develop module? I just updated on the Mac to LR 5.4.
Right-click on any RH panel header in Develop and put a check mark next to the Detail panel
Similar Messages
-
I have just connected my Ipad to my mac and went to upload all the pics from my mac onto my ipad but doing so it has overwrote everything on my ipad and therefore the pics on my ipad have gone!!!
Help - I have tried the restore but it didn't put back my photos it just started to sync the ones that had overwrote my old ones!!!I took the orginal photos on my iphone over the past couple of years and bit by bit i uploaded them onto my sony lap top in albums... Nothing to do with itunes...
A few months ago as my laptop didn't seem as reliable so i uploaded all the pics onto my ipad from my laptop, it was today where i thought i will upload more from my phone onto the mac then onto my ipad but insted it overwrote all the pics on my ipad.
I had tried to do the back up and it didnt work the photos were lost.
Then my ipad later today was driving me insane and wouldnt delete any of the pics so i just restrored it back to factory settings.
My laptop has had issues so i have in restored all that to.
I will now in the future just upload from my phone straight to my mac and not mess about wanting pics on my ipad.
I appricate your help but i am pretty sure i have lost all of my photos... My kids 1st day at school the lot... -
My computer was dropped yesterday and it will not turn on past this gray screen that tells me to reboot it, but everytime I reboot it, it just goes back to that same screen and tells me to do it again. Anyone know how to fix this?
When you jar or drop a hard drive when it's operating the heads strike the platters and ruin sectors and the data on them.
Your getting the spinning wheel because the OS has been damaged and/or quite possibly the drive.
You'll first have to determine if it's a hardware issue
Do #3 Hardware Test and #5 Disk Utlity Repair Disk/Permissions here (check the SMART status)
Step by Step to fix your Mac
If the drive is fine and you don't have a recent copy of your data off the machine then also do this
Create a data recovery/undelete external boot drive
Then proceed with fixing the damaged software, likley by #8 your problem will be fixed.
Step by Step to fix your Mac -
I just updated my iTunes on my Mac and now I cannot get any of my iTune files back on my phone?
So I did some automatic updates on my iTunes on my Mac today. When I synched my phone the new updates were there but my content in no longer on my phone, just my desktop. My content contains a lot of bought materials, but my own CD library as well. How do I get my iTunes content back on my phone???
Go into the control panel, add/remove programs. Uninstall iTUnes, Apple mobile device service, apple application support. Then redownload and reinstall iTunes.
There seems to be a glitch with the update where it doesn't seem to get everything updated so you need to get rid of it all and start fresh. This is just the programs, it won't affect your data. (as in when I did it it didn't touch my iTunes library) -
I just updated my iphone 4 to ios6 and I can't keep the wifi connection when the phone goes to sleep. I need to keep entering my wifi password when I wake up the phone. How do I keep the wifi on each time I walk into my house without reentering my password?
What? Do you work for Apple?
I have been on the phone for Apple since 5:30 Eastern Time today. We are still on the phone with them. It is 10:14 PM. We are going to get a new phone because the ios6 has major problems! The wifi connectivity is a serious problem. Apple is aware of it. More people need to do something about it. I am willing to start a class action suit against them. I have means to an attorney pro bono. If you are having problems using your iphone 4 or 4s with wifi and ios6...I suggest you spend time calling a senior advisor and get a new phone sent to you. They know they messed up but they can't fix it. -
I updated Adobe Flash on my Mac and now my solitaire app won't open. No error message, just -600.
I updated Adobe Flash on my Mac and now my solitaire app won't open. Message just says 'unable to open' -600. I tried to reinstall Full Deck Solitaire, but the app store says it is already installed, so I can't do it that way. What should I do? There's nothing in Help that helps.
Please restart the computer and try again. If it won't restart in the usual way, force a shutdown by pressing and holding the power button for a few seconds. Then press it again briefly to restart.
-
Just updated my iPhone 5s from ios 8.1 to 8.3. After the install it asked for Apple ID and password and to allow it to sync to Mac and iTunes. After following the steps my phone kept restarting - turning on and off and goes blank. How do I fix this??
I have had about 9 iOS devices at work do this.
The fix and it will wipe out anything on your iphone is to connect it to your computer and have the latest version on iTunes open. Hold the Power/Sleep and Home button till it blanks out. Keep holding the home button untill it says recovery mode on the screen of the computer and do a restore. -
I have just update my iphone 4 to iOS5 and it did all the usual restore stuff. The next time I connected to my Mac instead of syncing it started to restore again, thus locking my handset, any ideas?
This indicates corrupt files. A restore should resolve.
You might want to try a simple sync first -
I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?
* [/questions/777886]
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
browser.gesture.pinch.latched -> <b>false</b>
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
You can use the Filter bar at to top of the about:config page to locate a pref more easily. -
I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?
I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie -
I use Lightroom on my Mac and Apple laptop. I have upgraded to LR5 on my Mac and would now like to upgrade to 5 on the Laptop. How do I do this?
Hi Gus,
Kindly try the below mentioned steps if you already have Lightroom 5 installed on your laptop.
Launch lightroom.
Click on help.
Click on Check for update.
If you wish to install lightroom 5 here is the link: Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7 : Thank You
If you have Lightroom with Creatibe Cloud: Creative Cloud Help | Download, install, update, or uninstall apps
Thanks,
Atul Saini -
I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data? How can I fix the problem? Thanks
Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear. -
I have just updated to LR5. I also have a new Camera. Nikon D800. Trying to import directly (from camera) into LR. But unsuccessful. Getting the following message. "The files are from a camera which is not recognised by the raw format support in Lightroom." How can I import please?
Hi,
I assume you mean the Nikon D810 because D800/800E support has been there since Lightroom 4.1
Currently, because it is a new camera (D810) the only support is in a RC of ACR 8.6 for Photoshop CS6 and CC, as the RC runs out on 31 August it is expected support will be there in the next dot release of Lightroom.
Current limitations are that only full sized NEF is supported.
If you wish to import to Lightroom 5.5. you will need to download the DNG Converter v8.6RC and convert the NEF files (full size RAW ony) to DNG then import into Lightroom 5.5 -
I just upgraded to OSXYosemite on my Mac and then tried to use my Photo Shop. It said to download JavaForOSX2014-001-dmg...so I did. Then I attempted to open PS again and an error message came up which said, "an unexpected and unrecoverable problem has occurred. Photoshop will now exit. What should I do?
Which version of photoshop?
You'll probably need to reinstall photoshop and then apply any needed updates.
more info
Photoshop CS5: “An unexpected and unrecoverable problem has occurred. Photoshop will now exit“ after updating to Yosemit… -
I just updated my iphone to ios 7 and updated itunes to 11.1. Yesterday I noticed I couldn't move music from my library to my iphone. Today I noticed that most of the music on my iphone is gone. What do I do?
I don't see how the AAC Version thing really applies here - the issue seems to be with
the time it takes for "Preparing to Update" to run when adding new songs and
the fact that a bunch of songs can get temporarily deleted from your phone, then need to be recopied over.
I should also add that I'm using iTunes for Mac (OS 10.6).
And Linda0410, if you view your phone's library in iTunes on your computer while it's copying, you should be able to see a bunch of grayed out songs, and there will be a little indicator on the left hand side of each song that's currently being copied.
Maybe you are looking for
-
I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut do
-
How to Print the Value of a variable inside a PL/SQL package
Hi Friends, Here is my Scenario I have a PL/SQL Package. Let us call it Baseline Package. This Package includes a dynamically built merge Statement. Execute Immediate v_merge_query. I have a procedure which replaces which few Keywords from the Packag
-
I began having problems with my iphone 5 after I updated to ios7. It began having several issues e.g. freezing, turning on and off by itself and the home button was not responding. It is a long story because I had to talk to apple reps etc. to make a
-
Having serious problems with apps on iphone 5 ios7 (have read other posts)
Hello, My daughter has an iphone 5 with ios 7.02. Ever since she updated to ios7 she has not been able to update her apps. When she tries they grey out and are stuck on waiting. We have tried everything and I think I have read every post on the subje
-
Cursor postion with scripting in Adobe LiveCycle ES
Hi, I have a textfield that populates editable text when we click pdf preview. when I tab the cursor moves to the end of the pharagraph. we are using some screen readers that reads the text. Our requirement is to bring the cursor at the begining of t