Just updated to maverick and airport says I am out of range

So I just updated to the new maverick software and I am having trouble connecting to my airport express. It is saying I am out of range but I have not changed my distance from the airport. Is there anyway I can fix this?

Please check on the side of the AirPort Express to locate the model number.
If you happen to see A1084 or A1088, Mavericks will not support these older version of the AirPort Express. You can use a Mac running Leopard or Snow Leopard, or a PC to administer the older Express.
If you see model number A1264 or A1392, then Maveicks will work with this product.....and you may need to reset it as jonvis has suggested above.

Similar Messages

Just updated to Mavericks and can't open spread sheets in numbers

Just updated to Mavericks and can't opean spread sheets, says I must update numbers but numbers is already updated?

Hi REBOS1,
A key point in the article to which YeOldMacFan links is that you now have two versions of Numbers on your Mac, the new version in your main Applications folder and the old version in a subfolder named iWork '09.
Both versions can coexist on your Mac, even run at the same time, but you need to make sure you are opening a particular document with the correct version. The old version can't open documents that have been edited in the new version, and that's probably the reason you are getting the error message.
If you have old documents, it's best to make copies of them and open the copies in the new version, leaving the orginals unchanged.
SG

I just updated to Maverick and now my .mac mail account is not receiving any incoming mail. Please help!

I just updated to Maverick and now my .mac mail account is not receiving any incoming mail. Please help!

Try going to Mail/Preferences/Accounts/iCloud/Advanced and setting Authentication to Apple Token.

I am trying to install update on phone and it says computer timing out, how do I fix that

I am trying to install update on phone and it says computer timing out, how do I fix that

For me it worked when I switched the virus protection off while doing the installation. After you run the installation you then switch the virus protection back on.
Hope it works for you too!

I just updated to Mavericks and now my iPhoto won't open

I just updated my imac to mavericks, now my iphoto wont open. how do I fix this

Ah, thanks for the correction Terence.
I didn't realise the earlier versions still worked. I know that when I upgraded to Mavericks I then had to upgrade from iPhoto 9.4.3 to 9.5 in order for it to work. I guess we need to know which version Ibarber4 is currently having problems with.

I just updated to Mavericks and now I can't get my toshiba external HD to show up. It appears in Disk Utility but not in my finder. In Disk Utility it is grayed out and will not allow me to mount. Ive verified and repaired it. Nothing!

I cant take it anymore. Pleae someone help me. I cannot erase my HD becasue it has all of my pics for my kids and all of my movies school work. I need this fixed please

Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
Karen

Just updated to mavericks and now iphoto wont work. wont let me update as has previous owners appleid in command field and wont let me change

can anyone help? bought my macbook pro second hand and when i try to update iphoto so that it works in Mavericks it has the previous owners appleid locked in the id field and wont let me change so i cant update. i have logged into my account but makes no difference....????

A very good post by Linc Davis.
Linc Davis
Re: I bought a used MacBook Pro (mid 2010). How do I change settings so that I am the owner instead of "tourist"?
Feb 16, 2014 11:56 AM (in response to Dee SeaWarrior)
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter theserial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to thetechnical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the Ckey at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

Just updated to Mavericks and now I can't update iPhoto

When I try to update my iPhoto, it says an error occurred and to try again. I've tried several times now. I've tried rebooting my computer and then trying to update it, but to no avail. Any suggestions?
Thanks
Linda

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Just updated to Mavericks and now I can't update apps using my Apple ID

A few days ago I updated my 2012 Macbook Pro to Mavericks. Today I tried to update my apps but instead of asking for the password of my Apple ID, it asked for my dad's ID. The ID section was greyed out. The apps were all downloaded using my Apple ID. This didn't happen before I updated my Macbook.

To update you must log into the Apple ID that was used to set up the computer - if yu have account issues contact the App store support - link in on the right of the App store window
LN

Just updated to Maverick and now I cannot open any of my applications on my Airbook. It shows the program running but no windows appear on the screen. Help!!!

Any ideas as to why the applications do not open in a window?

Is an external display connected and turned off? If not, open Mission Control. Do you see the window(s) in any other spaces?

I have just updated to Mavericks and my email has gone'strange'. Help???

Everything papers to be archived, which I NEVER use, and when I try and move messages to where they should be, half of them get lost. This is in my shared gmail account for the rugby club.I haven't dared to look at my main sky account, or my own gmail account yet!

This is on my MacBook Pro by the way

Just updated to Mavericks and app store won't work

I can open and close the app store from the dock, but in the app store no mouse clicking works!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I just updated to maverick and cannot synch my iPhone???

the edit under services for my iphone is greyed out, cant even get to it? This was very easy before the upgrade???

Do you have a backup you can restore from?

I just updated my mac and when i went to open iphoto it says it "can not open because of a problem" how do i fix this?

i just updated my mac and when i went to open iphoto it says it "can not open because of a problem" how do i fix this?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon

Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon

See these previous discussions help.
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities

Just updated to maverick and airport says I am out of range

Similar Messages

Maybe you are looking for