Just updated to newest version ios now can't force my apps to close. everything I open stays open. Updated all the apps still no help.
Headline says it all. Other than this problem everything working pretty well. Thanks
Double tap the Home button, then swipe upwards on the App Preview (not the App Icon). Tap the Home button again to return to normal screen.
Similar Messages
-
I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4. I am currently connected to a perfectly running WiFI connection. This just started happening today (2/19/14)! Why am I not able to connect anything? I've tried ALL the fixes suggested. HELP!!!!!!!!! BTW, I know my Wi-Fi connection is good because I'm using it on my desktop and other people in my office are also connected on their iPhones and desktops. Again, HELP!!!!
You may not really be connected to your WiFi network.
Your router may not have given your iPhone a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?
If you're on windows try the following:
This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
1. Quit itunes
2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
4. press ENTER
5. Reboot your machine
6. Restart itunes & connect device to sync
7. Good luck -
i have just updated to the newest version of ipod softare, the ipod intalled new software but now all the music and videos on it will not play, how do i fix this
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and videos and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Hey, I just updated to the IOS 7.1 It has made various boxes that used to be clear/blurred photo to now grey for example the box at the bottom of the screen, Can i change it back? thanks!
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Just updated to the newest version of iTunes, when connecting it prompts me to update my iPhone to the newest version of IOS; however, when I hit download it says I have purchases that need to sync but where and how do I do this on the newest version? It isn't doing it automatically and I am unable to find the sync button that was available on previous versions of iTunes. I would hate to think that I'm going to lose the many purchases that I've made, someone please help!
File>Transfer Purchases
-
Have just updated to the latest version of ios6 on my iPhone 4Sand now I can't see the apps that need updating. Is showing 8 but just left with blank screen- how do I fix this?
Look for the little Flag button in the lower left corner.
-
Question
I just updated to the latest version of Firefox and now I can no longer download facebook videos with realplayer as I formerly could. How can I downgrade to my previous version of Firefox?Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
I have windows XP, just updated to the newest version and not none of my themes work. It's just all white for my tabs and tool bar. Very hard to see. I've reinstalled the themes and nothing works.
Any ideas?You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration -
just updated to the new beta 3 version, now I can't get on the internet at all, I am using my girlfriends computer to send this to you. Just gives me a blank tab and WILL NOT DO ANYTGHING!!!
Try to create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
Just updated to the latest version of iTunes. Now my CD drive is can't read CDs.
Just updated to the most recent version of iTunes. Now my CD reader won't recognize any CDs or games I put in.
There is no error message, I hear the reader booting up but I get no box asking my to import files,play ect.
CDs don't appear on the drive in 'My Computer'
Tested the same CDs on another computer and they were recognized
CDs are commercial and from the libraryTry HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install (Formerly TS2308).
tt2 -
I now have the newest version of iTunes. My iPad is up-to-date as well. When I plug in the USB to my computer, it makes the proper sound, but I do not see the device identified in iTunes and therefore cannot sync it. Instead, it opens to the file location for my iPad. How do I connect iTunes to my iPad? It was working perfectly before I updated iTunes.
See the tt2 user tips for help:Troubleshooting issues with iTunes for Windows updates
-
I just updated to the latest version of iTunes and now it will not sync with my iPhone 5
I just updated to the latest version of iTunes and now it wont detect my iPhone 5 to sync. Can anyone help? I am running on Windows 8.
I have already gone into control panel and repaired the program. Nothing is working!See the tt2 user tips for help:Troubleshooting issues with iTunes for Windows updates
-
i just updated to the icloud n new ios update and all my email folders are gone how can i fix this
IOS is the operating system for an iPhone, or an iPad, I assume you mean OSX as this is a Mac forum.
What version did you update from, and to. -
Hi,
i just updated to the latest aperture, i have projects previously saved on a drive (in the old version) that now won't load... how do i update them?But, unless I missed something, you are doing the repair with Aperture 3.5 so if 3.5 can't open an earlier library before doing the upgrade then unless I'm missing something the library will be upgraded before the repair is run, no?
OT:
You got me there, Frank - I wondered about the same thing, but Aperture is behaving differently, when upgrading a library, depending on if you are launching into the First Aid Tools or not.
I repeated my experiments, to explore this difference:
I restored an Aperture 3.4.3 library and launched the First Aid Tools:
Apertur went directly into First Aid Mode without first asking to upgrade.
Then "Repair" asked to be allowed to upgrade the library as you predicted.
During the upgrade "Aperture"showed "Rebuilding", not "Repairing" or "upgrading".
Second experiment: When I only double-click the 3.4.3 library instead of repairing, the upgrade alert is very different:
It takes a shorter time and does not show "rebuilding".
I am quite certain, that Aperture will use a different upgrade prodecure, when launched into the First Aid panel for repairing or rebuilding.
Maybe you are looking for
-
How to make my iTunes Library use the music which is already on my NAS?
Hi there, I know there have already been some posts around the forum about having the iTunes library on external harddrives or NAS's. Though my question is different to that question and the solution for those can't seem to cater for my issue. In the
-
How to fetch XML file thru Sender File adapter
Dear friends, I am having a scenario of fetching an xml file through sender file adapter. When i am testing my mapping in Test mode of message mapping it is working fine but when i fetch the real source xml file which is not having the XML namespace
-
I tried dragging from the site onto the toolbar, and even though that works on my Mac, doesn't on Win. 7. I saved Facebook to my bookmark toolbar in the bookmarks folder, but can't get it out of the folder.
-
Unable to reset document with ***. Translation Adj. accounts using FBRA
Hi, When i tried to reset a document which has with ***. Translation Adj. accounts using FBRA , i got a message saying "Exchange rate differences were posted" "Clearing document will be reversed". "Do you want to continue" Yes,No. When i click "NO",
-
Direct link to file in workflow notification email
Hi everyone, I know that I can set up a workflow for each of my forms where an email is automatically sent to specific people. If I have a file upload field on my form, is it possible for there to be a link to the file that was inserted in the CRM vi