Just Upgraded and now NO AUDIO AT ALL

I just upgraded my Apple TV to the new update that came out today. It took forever to restart, seems like it restarted/installed at least 3 cycles. Finally it started up and looked beautiful.
But no audio. Nothing. I have spent over an hour now, resetting, changing settings, restarting, unpluging, new cable to between Apple TV and TV, changing settings more, changing all settings, NOTHING.
No Audio on the Music, no audio on the Videos, No audio on the YouTube, no audio on the system level functions, NO AUDIO ANYWHERE. NO AUDIO ANYWHERE. Don't even ask "what about...?" NO audio there either.
Oh and duh, yeah my Apple remote works and I have tried turning the volume up up up up, from every area of the interface, more more more more from the Apple remote.
Yes, the audio works fine on the TV, the Cable Box, the DVD player, and up until the moment I upgraded the Apple TV, my audio was awesome on the Apple TV.
I think this release has bugs, and its not pretty.
Contact me somebody. I tried to file a support issue but Apple's website does not let me submit my serial number tonight. Ewww. How sad is that?
Carl
Message was edited by: MonumentCarl

Yes! This is what I see too.
To sum up:
This audio path:
AppleTV --HDMI--> TV -- Coax(digital)--> Receiver
only works with 5.1 audio after the Take 2 update.
The menu blips and beeps work (apparently 5.1), the parent poster's Die Hard rental with 5.1 worked, and a DTS CD (also 5.1) that I have ripped into iTunes plays through the AppleTV. Everything else, i.e. all 2-channel (PCM?) audio does not work.
As shagless said, the TV itself can play the sound, but it refuses to pass the audio through on the digital output. This definitely should work... it works with my XBox360, and it used to work with the AppleTV. *_There is something bad in the digital audio stream in this new version._*
The best I can do for non-5.1 audio through to the receiver is by changing inputs on my TV, then changing back. That gets me about 2-5 seconds of audio, but then it cuts out.
I have followed all these procedures:
http://docs.info.apple.com/article.html?artnum=305211
I have also done a full restore (back to the pre-Take2 version), and verified that everything was working fine. I then reapplied the new update and it's back to not working.
I have a Philips 42" plasma with upgraded firmware.

Similar Messages

Just upgraded and now a keyboard is appearing on an app and I don't want it

Just upgraded and now a keyboard is appearing on an app and I don't want it

If the keyboard isn't supposed to show in the app then it's possible that the developers need to make a change for iOS 8.
You could try closing the app via the iPad's taskbar and see if that makes any difference.
If not then you could try deleting the app and redownloading it and see if that fixes it - though if you've made in-app purchases within it you may want to check if they are re-downloadable.

Does acrobat pro 9 work with microsoft office 2013? Just upgraded and now Acrobat does not seem to "see" my documents

does acrobat pro 9 work with microsoft office 2013? Just upgraded and now Acrobat does not seem to "see" my documents

uninstall.
run the cleaner, http://labs.adobe.com/downloads/acrobatcleaner.html
restart your computer.
right click the setup file and click "run as administrator".

Just upgraded and now can't burn... error 4280

can someone help me please!!!
i just upgraded to the new iTunes and now i can't burn any CD's...
i keep getting the error 4280 message...
a friend built my comp, so don't know all the info about the machine... but this is what i get when i run the CD diagnostics...
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
ECS K7S5A
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)\GeForce2 MX/MX 400
Found aspi32 running.

Hi icsailor,
This sounds like a known issue reported here:
https://bugzilla.mozilla.org/show_bug.cgi?id=713014
There was a workaround posted, but I've not tested it myself. Here are the steps.
# Go into Yahoo Messenger Options - Change the Window in the dropdown to Tab and press OK.
# Then go back and switch it to small window and press OK.
Once the bug is officially resolved, you could try running a Nightly or Aurora build to use the fix early.
Hopefully this helps!

Just upgraded and now can't access Yahoo IM. What an I do?

I just upgraded to the newest version of Mozilla and now I can't access Yahoo IM from my Yahoo mail page. I can open and close IM, but when I click on a contact to chat, nothing happens. I get no messenger window to type in and when people send me an IM, I have no window to reply. Help!

Hi icsailor,
This sounds like a known issue reported here:
https://bugzilla.mozilla.org/show_bug.cgi?id=713014
There was a workaround posted, but I've not tested it myself. Here are the steps.
# Go into Yahoo Messenger Options - Change the Window in the dropdown to Tab and press OK.
# Then go back and switch it to small window and press OK.
Once the bug is officially resolved, you could try running a Nightly or Aurora build to use the fix early.
Hopefully this helps!

Just upgraded and now phone is DEAD. Won't turn back on even holding down both start and sleep for 15 seconds! Was perfect before...help!

Upgraded my iphone4 2 days ago and now it won't power on at all. It is completly dead. Have tried plugging it in wall and computer. Have tried holding down the power and sleep buttons for 15 seconds... nothing. Please help!

You have done everything correctly so far. Try charging again with the wall charger for at least 30 minutes. Maybe the iPhone will turn on itself. If not then try the Reset again, hold both Home and Power buttons until the iPhone restarts, keep holding for at least 30 seconds if necessary. If still nothing, make appointment with Apple Genius and have them fix or replace your iPhone under Warranty coverage.

Just upgraded and now can not update contacts

I upgraded to the new iPhone software last night and now can not edit contacts. Help!

Hi icsailor,
This sounds like a known issue reported here:
https://bugzilla.mozilla.org/show_bug.cgi?id=713014
There was a workaround posted, but I've not tested it myself. Here are the steps.
# Go into Yahoo Messenger Options - Change the Window in the dropdown to Tab and press OK.
# Then go back and switch it to small window and press OK.
Once the bug is officially resolved, you could try running a Nightly or Aurora build to use the fix early.
Hopefully this helps!

Just upgraded and now no Microsoft Office suite?

We decided to upgrade to OS X Mountain Lion last night and have now found we cannot access any of our Microsoft office applications..
What can we do to get this back and working again?
Do we have to purchse a new office to mac package?
Cheers
Scott

Jitanjafora wrote:
Niel is right. Older versions of MS Office are not compatible with Mountain Lion --one of the many unwelcome features of a truly unfriendly, misguided OS.
If you have more than one Mac, and ANY of them is compatible with Snow Leopard, downgrade it. In fact, there is no reason to upgrade to Mountain Lion unless we absolutely MUST. I was VERY happy with Apple from 10.3 through 10.6, so I jumped the gun and upgraded the computer I use for email to Lion as soon as it became available --a decision I have come to regret.
If I were you, I would avoid the expense AND the trouble of buying another MS Office suite by simply downgrading back to the previous OS. If downgrading is not an option, LibreOffice is a great piece of software, fully compatible with MS Office, and free.
Poor advice. Please avoid passing your personal disattisfaction, most likely caused by your own Computer habits, onto others. Many, many million of users are running Mountain Lion without an issue.
Pete

I just upgraded and now Firefox will not even open!!

Can I go back to a previous version

What happens when you try to start Firefox?
Some things that might be relevant depending on the answer...
Sometimes Firefox will "hang" during startup. The process is in memory but stops working. In that case, you may need to use the Windows Task Manager to "kill" the process.
* You can launch the Windows task manager by pressing Ctrl+Shift+Esc.
* First check the Applications tab, then check the Processes tab (look for firefox.exe).
* You can select the stalled item and use the End Task or End Process button. Note that if Firefox actually were in use, this could cause data loss, but since it's not yet displayed, this should be okay.
Sometimes a program-control firewall will block an upgraded Firefox as possibly being modified by malware. In these cases, it may help to clear any references to Firefox from the firewall and have it redetect the application when you try to start it.

I just upgraded and now can't cancel a print job.

The icon to delete is not there anymore. It was so easy to cancel. I'm trying to print a photo and it wanted to print on paper. That mistake will waste a lot of ink, so I want to cancel the job, but can't. Of course, I could unplug my printer, but obviously I don't want to have to do that every time I want to cancel a job. Help!

No it's not, that's the reason you should click the x if you want to cancel a print job. If is has already started, pausing it will pause a partially finished job. Subsequently canceling it may cause corrupted print output or a communications error the printer ought to handle.
If there is nothing in the print queue then the job has already been sent to the printer and your Mac is finished with it. In that case, use the printer's front panel control to cancel the job.

I just upgraded my iPad to iOS 7.1.1 and now my music is all staticky. How do I fix it?

I just upgraded my iPad to iOS 7.1.1 and now my music is all staticky. I want to listen to the music but it is hard to understand. What should I do?

Will I lose anything if I reset all the settings? Apps? Data? Etc....

HT5654 i updated my ipad 3 to latest version of system upgrade and now it is not working at all. it just shows an itunes logo. I have tried restarting.

i updated my ipad 3 to latest version of system upgrade and now it is not working. All black screen with Itunes logo. I tried restarting

Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

Hi, just upgraded my iphone 4s to ios6. all of my playlists are gone and if i create a new one, i does not appear on my phone. itunes match is activated. can someone help me?

Hi, just upgraded my iphone 4s to ios6. all of my playlists are gone and if i create a new one, i does not appear on my phone. itunes match is activated. can someone help me?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

Just upgraded and iPhoto said it has to upgrade library but keeps freezing. Have tried it too many times now and I need those photos ASAP HELP!!

Just upgraded and iPhoto said it has to upgrade library but keeps freezing. Have tried it too many times now and I need those photos ASAP HELP!!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?

I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?

You are seeing the message because the new AirPort Extreme has some specific System Requirements:
http://www.apple.com/airport-extreme/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme.

Just Upgraded and now NO AUDIO AT ALL

Similar Messages

Maybe you are looking for