Just upgraded from a 3gs to a 4s. Now I have problems getting on the internet with the 4s.

Just upgraded from a 3gs to a 4s and now have problems getting on the internet.

If your backup is encrypted and you don't know the password anymore, you'll have to start from the beginning and set up the phone without the backup. An encrypted backup can't be used anymore without the correct password.

Similar Messages

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

I just "upgraded" from iPad4 to an iPad Air, now my videos wont play

I just "upgraded" from iPad4 to an iPad Air, now my videos wont play!
I Tested it on 2 iPad air's and my old iPad 4
they play perfectly on the iPad 4 from the native photos app
i tested it with old videos and shot some new footage but nothing plays on either ipad airs

I have the same problem, except it's iTunes that won't sync with my iPad. The thing is, iTunes isn't in the iCloud on/ off syncing list on both my iPad and my MacBook air for some reason.

IMovie wii no longer share with iDVD. I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly. Any thoughts?

iMovie wii no longer share with iDVD. I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly. Any thoughts? This is what comes up.....

iDVD does work with Yosemite although, as Kappy pointed out unsupported for 2 years, so try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/Preferences folder.
2 - delete the contents of IDVD'S cache folder: User/Home/Library/Caches/com.apple.iDVD.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
If iDVD crashes again post the first 50 lines of the crash report. Don't post a screenshot but copy and paste the actual text.
To get a movie from iMovie to iDVD it should be exported out of iMovie as 480p and added manually to iDVD.

Just upgraded from OS 10.3.9 to 10.4: Safari problems

I just upgraded from Mac OS 10.3.9 to Tiger 10.4; everything is working fine, except as follows:
1. Software Update does not work. It seems that it tries to connect to the Apple servers (I can see the router and modem lights blinking), but a connection does not take place (the lights blink a couple of times every few seconds).
2. Safari connects without any problems to this and other Apple Support forums, but not to any of the bookmarks in the Bookmarks menu.
Also, I believe that I may have caused the problem, and will give the details hoping that my problems with Safari may help others solve theirs. I may have made a mistake right after "upgrading" to OS 10.4, specifically after the required restart.
When my iMac G5 restarted, a registration form showed on the screen. The form was the data on my account. My account is not an Administrator account, but a "User" account instead. There was an option to change the account's "User's name," so I went ahead and slightly changed it by adding a "dot" to my first name initial (I don't use my first name, just my initial).
-The old account name was as follows: R
-So I changed the account name by adding a "dot" (.) right after the initial, to look as follows: R.
Right after making the change, I had the option to immediately connect to Apple and REGISTER, however, a connection could not be established or the computer was not responding, so I clicked on "Register Later" and quit.
Mail works fine, and so the DSL modem and router. I can access this forum, but Safari tries but can't to connect to other forums.
Do you think that by changing the User Account's name I may have screwed things up? I have tried MS's Explorer, but it too shows the same problems.
Any ideas on what to do at this point?

Steven: I know that the problems I had with Safari is not similar to yours, but I ended erasing the hard drive and reinstalling Tiger four times (I have posted the full story in a couple of Apple forums).
On the pre-final try i removed the router from the computer and only used the DSL modem. However, I decided to use Safari between Software updates, and again Safari stopped working, as well as Software Update. I had removed every USB and Firewire cable, set-up the network to stay active without interruptions, set the computer to stay awake forever, the screen to stay awake for over three hours, and the hard drive to stay awake.
Then on the final erasing/installing, I made sure that I didn't use Safari until every little update was finished all the way to a complete Mac OS 10.4.2. Once that was accomplished I used Safari, and I have been using it since.
A friend of mine is upgrading the router's firmware, just in case that was par t of the problem, but I don't think it was, since the router was out of the picture on the pre-final session.
I believe that for some reason OS 10.4 screwed the Network panel functions. If you just look at the settings they seem to be OK, but not really. The problem may be related to the G5 CPU and how Mac OS 10.4 works with it. While I was having a myriad of network problems, I could connect to the Internet, retrieve my mail, etc. using my son's Mini, as well as an old Mac 7300. Both of these worked just fine connected to the network (router and DSL). Only my iMac G5 would not work.

Just upgraded my 2014 iMac to yosemite. Now my Bose sound link won't work. The bluetooth is connected and it beeps as normal, just no sound comes from the speaker. This is very frustrating (along with the now flat rather than 3D icons on the desktop)

I have just upgraded my 2014 iMac to YOSEMITE. Now my Bose Soundlink bluetooth speaker connects, beeps as normal, but produces no sound from the Bose speaker whatsoever. HELP PLEASE

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

I just upgraded from a 3Gs to the new 4s and I noticed that my Bluetooth in my car no longer works well with Siri. Everytime I use a voice command to dial a number it starts the search, finds the number and then says call ended!

Is anyone else having this problem? I never had a problem with the 3Gs!!

Almost there...
I'm replying to myself, as I have found the answer.
1. Started iTunes, connected iPhone 4S, turned on Airplane mode.
2. In iTunes, hovered mouse over my iPhone 4S name in left column, in popup box clicked on "Restore from Backup..."
3. From menu clicked on name of my old iPhone 3GS backup.
4. Backup appeared to be finished in about 8 minutes, but I new that could not be correct...iPhone had rebooted, so I entered password. I could see that most apps were "waiting" and grayed out, also in iTunes top status box indicated that apps were being sync'd. Also noted that my iPhone 4S now had the same name as my "old" iPhone 3GS.
5. After some time (a couple of hours, perhaps, not sure because I went to sleep), everything appeared sync'd on new iPhone, and iTunes stated that sync was OK.
6. Manually renamed my new iPhone 4S to its correct name, then backed up to computer.
I decided to hold off on iCloud for now - two majore issues: 1) have heard some reports of data dissappearing, and 2) I will have to talk to Apple about MobileMe instructions for moving to iCloud, which state that move will not transfer my mobileme email, and also that I cannot install iCloud management software (nor sync to Outlook) on my Windows XP computer - I intend to upgrade to a new Win7 in January 2010, and I have heard it is not so simple to change iTunes/device syncing to another computer. Sounds like a good project for the Christmas-NewYear holidays...

Hi I've just upgraded from Snow Leopard to Mountain Lion now Quarkxpress 6.5, Adobe creative suite CS2, Adobe Acrobat 7.0 professional and Microsoft Office 2004 will nolonger open. Can anyone please advise me what I can do to get these programs running.

Hi I've just upgraded my MacBook Pro from Snow Leopard to Mountain Lion. Now my installed programs:- Quarkxpress 6.5 - Adobe creative suite CS2 - Adobe Acrobat 7.0 professional and Microsoft Office 2004 will not open - I get a banner saying not supported by power mac. Can anyone please help me I really need these programs for my work. Thank you!

hi tuggerose
i think it is bad new for you. if it's any consilation i went through the same thing when i loaded mountain lion when it first came out. i think the problem is that mountain lion is a pure 64bit operating system and the software you have is 32bit. earlier os's were able to emulate 32bit but the new system does not. the answer is new software. i did it and it cost me a load of money and much angst so your not alone.

I just upgraded from vista to windows 7 and now when i try to type in a url address in the navigation bar nothing but gibberish appears

whatever letter i type into the navigation bar, some other letter or number appears. i do not have this problem on chrome or internet explorer.

go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check and tell if its working. If this doesn't work then try this
Update all Firefox Plug-ins -> https://www.mozilla.com/en-US/plugincheck/
If Updating Plug-ins doesn't work then follow these links.
Cannot connect after upgrading Firefox
https://support.mozilla.com/en-US/kb/Cannot connect after upgrading Firefox#w_the-cause
Error loading web sites
https://support.mozilla.com/en-US/kb/Error%20loading%20web%20sites#w_connection-errors
Firefox crashes when loading certain pages
https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20loading%20certain%20pages#w_update-firefox
Is my Firefox problem a result of Malware
https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it#Getting_your_crash_report
Check and tell which solution worked.

I just upgraded from IPhoto7 to 9.5. Now I can't open iPhoto without a downloaded tool to bridge the gap bewteen versions. I downloaded the tool and I still get the message "To prepare the library, use the iPhoto Library Upgrader available from Apple."

I had to upgrade to Mavericks to send off the iCanendars I made in iPhoto. Then I had to upgrade my IPhoto from 7 to 9.5. Now when I go to open iPhoto I get the message "To prepare the library, use the iPhoto Library Upgrader available from Apple." Well, I installed the Upgrader, but I still get the message and can't open iPhoto. I have tried restarting the computer, but that didn't help. How do I get the computer to recognize the Upgrader?

You may get more replies in the iPhoto forum.
https://discussions.apple.com/community/ilife/iphoto

I tried to upgrade from FF7 beta to FF7 and now I have no Firefox at all

I was using the FF7 beta. When I saw that FF7 had been released, I downloaded and tried to install it, without uninstalling the beta first. That may have been a mistake. It got partway through the install process and then asked me to reboot the computer. After the reboot, my FF shortcut no longer worked ("Searching for firefox.exe"). I used another browser to download the installer again and ran it, only to be told that I needed to reboot my computer in order for a previous install to complete. I rebooted; no change. Attempting to remove the existing installation in Add/Remove Programs has not helped, though Mozilla Firefox is no longer listed there.
I'm using Windows XP and my standard user account doesn't have admin privileges. This hasn't been a problem for Firefox until, perhaps, now. I've tried running the installer from an admin account as well, with the same result.
Is there anything I can remove manually to fix this?

OK... I found a Mozilla Support article - https://support.mozilla.com/en-US/kb/The%20program%20must%20close%20to%20allow%20a%20previous%20installation%20attempt%20to%20complete - which says deleting xpicleanup.dat will solve the problem; but I guess that's out of date (or the presence of that file isn't the only cause of the bug), because there's no xpicleanup.* on my machine. However, elsewhere in this forum - https://support.mozilla.com/en-US/questions/786890 - I found a suggestion to install the new version somewhere other than the default folder. I did that, and it worked; and it even preserved my bookmarks, add-ons and previously-opened tabs. (If anyone finds this while trying to solve their own upgrade/install failure: choose Custom rather than Standard install, and just change the suggested folder name.)
The only remaining sign of the problem is the icon in my Quick Launch area: if I try to use it to launch Firefox, I still get the error "Windows cannot open this file: firefox.exe.moz.delete". Having recorded that here for posterity, I'll be replacing the icon.

Just upgraded to snow leopard and my intellipoint mouse doesn't work, does it not work with the later versions of the OS

I just upgraded to snow leopard and now my intellipoint mouse doesn't work, I tried downloading a new driver and it installs successfully except an extension but it still doesn't work, is this typical of the OS higher than 10.4? Is there any way I can get around this problem?

You need to check with the mouse's developer and see if it's supported or not. That information wouldn't be known by users on this forum.

On a MS Vista platform I just "upgraded" to Firefox 10.0.2 and now cannot connect. My wireless devices go throught the same DSL line and work. fine. 9.0.1 (previous version) worked fine. Suggestions?

I just "upgradd" to Firefox 10.0.2 and now cannot access the internet. This is an MS Vista platform. Wireless devices, through the same DSL line, are still fine, suggestions?

Did you try to view this article? [https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Problems connecting after Firefox Update]
You should also try using Firefox in [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode]
Thanks,
Borian

Just upgraded from iPhone 3GS to iPhone 4S and MacBook won't recognize new iPhone when plugged into USB, any tips so as i can sync contacts from old phone and transfer my playlists/photos/apps etc?

Can you remove the old phone from itunes and authorise the new one?

See Here for Transferring from Old Phone to New Phone
http://support.apple.com/kb/HT2109

I just upgraded from Acrobat X Pro to Acrobat XI Pro. Acrobat X Pro was part of the CS 6 Creative Suite.

I thought I had a legitimate copy of X Pro. Everything moved along nicely until I tried to start XI Pro. It asked for a valid serial number. I entered the Serial Number for CS 6 and it is not valid. Now what?
Adobe doesn't let me upgrade?
John

Guess what? I have two copies of CS 6 - one for a Mac and one for Windows. It would not accept my Mac Serial number, but it DID accept for the Windows version. Even though this is a Mac... Ha! So problem solved.

Just upgraded from a 3gs to a 4s. Now I have problems getting on the internet with the 4s.

Similar Messages

Maybe you are looking for