Just upgraded my iMac to Yosemite. It is now crawling. I'm planning to reformat the hard drive and installing fresh Yosemite and reloading the hard drive. Do I deactivate my CS 6 Suite and Lightroom and then reinstall. Is anyone else experiencing a sl
I just upgraded My iMac (2009) to Yosemite. It is now crawling. I planning to do a fresh install of the operating system. This requires me to format the hard drive. I have already backed up my data. With regards CS 6 suite and Lightroom is the proper process to deactive the program and then reinstall it from my Adobe account? Any other input would be appreciated.
yes, deactivate before uninstalling.
to reinstall, you only need your serial numbers and the installation files.
the installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
Similar Messages
-
How do I uninstall and then reinstall itunes if my itunes wont even stay open since i accidentally removed bonjour?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes (similar to those above) and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if iTunes or one of the components won't install normally.
tt2 -
When connected to my new Ford Mondeo, my ipod nano can be controlled through user interface in car. This worksd most of the time, but after a while if I try to change the music or search, it comes up with message 'Loading Data'. I then have to pull out USB and reinseert, at which point it works again. Has anyone esle expereinced this/have a solution?
Does not matter if anyone else has this issue. You need to contact the Ford dealership. It's their product you are having problems with.
If you really want to know if anyone else has this issue, post on Ford's Mondeo message boards. It's where the Ford car owners hang out. -
OSX 10.6.4 and onwards...anyone else experiencing this stuff?
I just want to know if anyone else has been having these issues too, because all they seem to do is pile up with every update. Let's go back to 10.6.4...
First, I got it, and as soon as I did, my sleep light stops working and the computer takes forever to go to sleep.
Then I get OSX 10.6.5. Start up begins to take forever. The sleep issue wasn't fixed. iTunes began slowing down, giving me the rainbow disk as I searched for a song or tried to load it. Logic Pro also takes about a minute now to prep the hard disk to record instead of like one second.
Then TODAY I just got 10.6.6. neither of the previous issues were fixed. I did a HD scan to see if there were issues, and there was one error that was repaired with the disk, but it fixed nothing.
Has anyone else had these surmounting problems too?No, because the problems are associated with your system installation and/or hardware.
The sleep light may be hardware. The other problems would likely be solved by doing a backup of your drive, then erasing it and reinstalling Snow Leopard from scratch then downloading the 10.6.6 Combo Updater to update (support.apple.com/downloads/.)
In addition verify you have installed any released firmware updates for your particular model, try resetting the PRAM How to Rest the PRAM and the SMCHow to Reset the SMC. -
Os 5.0.1 startup problems. iPad 2 hangs on startup since upgrading fom os4.
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
Everything worked fine prior to the installation. I am aware of bug issues that people are reporting with regard to no applications working and strange error messages. My MacBook Air is fine; my wife's MacBook is fine. It's my iMac 12,1 that isn't.
It is an enormous crash report error rather than a short message. Both Address Book and Mail crash. I restored my iMac to pre-10.7.3 and everything worked fine once more. I downloaded and installed 10.7.3 as a combo a short while ago and the crash report for Address Book and Mail once more returned.
I've just copied the start of the crash report:
Process: Address Book [378]
Path: /Applications/Address Book.app/Contents/MacOS/Address Book
Identifier: com.apple.AddressBook
Version: 6.1 (1083)
Build Info: AddressBook-1083000000000000~1
Code Type: X86-64 (Native)
Parent Process: launchd [185]
Date/Time: 2012-02-19 18:03:40.950 +0000
OS Version: Mac OS X 10.7.3 (11D50b)
Report Version: 9
Interval Since Last Report: 2340 sec
Crashes Since Last Report: 6
Per-App Interval Since Last Report: 13 sec
Per-App Crashes Since Last Report: 3
Anonymous UUID: DFA67AE4-98E4-49AD-937D-95CCC1A37F54
Crashed Thread: 3 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
objc[378]: garbage collection is OFF
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFString objectForKey:]: unrecognized selector sent to instance 0x7f898a69b5e0'
*** First throw call stack: -
Just as I was posting this question, my entire iPad crashed, giving me the symbol indicating it was revving back up it I had to plug it in & press the main power button to get it to come back.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
Also the animation of the bell with a sound bar underneath is not working properly. Sometimes it pops up with the bar under the bell and sometimes the bar is missing and just the square with the bell is all you see. The side sound buttons are still functioning, just an animation glitch. When head phones are plugged in there is no change in the strange sounds going in and out. Videos are the worst and not only do they not play sound but thy also pause themselves??? The typing has intermittent sound. I have hard reset and rebooted my phone about 8 or 10 times with only temporary relief. I connected to iTunes and toatlly reset everything once, still no change??
Are you connected to wifi?
If you can't do it on the phone, you can most certainly do it via itunes. -
So incredibly annoyed, it's unbelievable! My ipod won't sync or even connect to itunes. It used to sync fine before i downloaded the new version.
I read this from one of the blogs>
There are 3 step to repair 0xe800000a error
My friend had the same problem with you. I am sure your computer has registry problems.It is very easy to repair 0xe800000a error. you just need 3 steps:
1: Download a registry cleaner and install it.
2: Open the registry cleaner and scan you computer for free.
3: Click fix button and you done.
Download the top 0xe800000a error repair tool here:http://www.FixErrorTips.com/ttfix-0xe800…
Source(s):
http://www.FixErrorTips.com/ttfix-0xe800…
iPhone 3G, iPhone 4, iPad2, Motorola DEFY (At&t,T-Mobile and SmartFree Quattro) iSip from InTouch SmartCards -
Is there any way to get a person to help with an app problem. I have a ton of music in "Pages" on my Ipad which I use for gigs. I cannot get to my fake book sheets with pages locked up after an upgrade
Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
HTC one M8 keeps getting hot and quickly draining battery, anyone else experienced this?
every couple of days my HTC one M8 gets hot to the touch and I noticed the batter display may show as high as 90% but it will die with in 5 minutes, one time i restarted it and it showed 30% battery left. i'm thinking the battery is already going bad even though the phone is only a few months old, any other ideas? I did check and nothing is running in the back ground. I stopped playing any games after it did it once and it's done it several time since so don't think its a game / app issue. thanks!
Hello xonnia!
I'm so sorry to learn of these issues with your device. Let's take a closer look into this OK? How long has this been going on? When the device gets hot, is it being used or is it in standby mode? If this is happening when the device is not being used, to be on the safe side, please take the device to the nearest corporate store location. You can find one here: http://vz.to/1fbwemQ
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport -
I have just upgraded my imac to osxyosemite but now cannot upload my photos from camera to iphotos
I HAVE JUST UPGRADED MY IMAC TO YOSEMITE AND CAN NO LONGER UPLOAD PHOTOS FROM MY SONY CAMERA TO IPHOTOS
To do this your device should be firstly connected to computer and iTunes is open. Put your device into dfu mode: 1.turn off your device 2.press and hold power and home button simultaneously for 10 seconds and release power and keep holding home until iTunes says a device in recovery mode. now should be able to restore.
-
Is it possible to wipe out iMac with ML upgrade and THEN reinstall SL from disk, back up with TM?
Iv'e been going round and round with my iMac ever since Genius bar employees "upgraded" me to ML while replacing Seagate HD per the recall. THis is a late 2009 27-inch iMac that came with SL.
What I think might solve this once and for all is to completely wipe out the hard drive and THEN reinstall SL from the disk that was shipped to me by Apple.
Here's what has happened thus far:
1. iMac was working fine, but per emails from Apple, replacing the Seagate HD that came with the computer was advised. Made appt, took it in after backing up to external hard drive.
2. Picked up the iMac first week of August. Found that they had upgraded me to ML.
3. Proceeded to put back contents of backup from July 27 (before the hard drive was replaced, all saved in SL).
4. Immediately after back up was reinstalled, realized that iPhoto contents (ALL of my saved files/photos, movies, etc, both work and personal) are inaccessible. Also, fan will not stop running (and this is true even when there is no user signed in, ie, no CPU-intensive programs running). Programs that worked in SL no longer work with ML (iWeb, etc).
5. Have been in contact with Apple numerous times, and finally got a senior tech to work with me via phone. I had a SL disk borrowed from a friend (the 27-inch was a replacement for original iMac that was defective and never received any install disks with new iMac Jan 2010). Per instructions from Apple tech, backed up iMac, then tried to reinstall with SL disk. When the progress wheel only kept spinning, he said that the disk I was using must be incompatible and I waited for a replacement SL install disk to be mailed to me.
6. Called back when I got the new SL disk, and then we tried it again. When the progress did the same thing, ie just spinning, Apple tech said that I must have a hardware problem and he instructed me to make another appoitment with the Genius bar. I did that and am supposed to take it in tonight.
7. Apple tech said it must be a hardware problem, that the super drive would not read the install disk, BUT, the super drive (actually both of them, one inside the machine, one external super drive purchased separately) has no problems reading audio CDs. It is ONLY the SL reinstall disk.
That, along with the continually running fans that have also been deemed by Apple tech to be bad hardware (which were both fine before the upgrade to ML) make me think that it is the ML software that does not work properly with this late 2009 iMac. It was designed for SL, not ML.
I suspect that if the hard drive on the iMac is completely wiped clean and SL then reinstalled with the disk that was mailed to me, this would put my machine back in order with SL as the OS.
I'd like to try that BEFORE I take this iMac back to the Apple Store. I have the back up from July (before ML was put on as the OS) and that's what I'd like to put back on. I can more easily save jpegs that were savde after ML was put on as the OS than I can save everything (one by one) that was on this iMac from Jan 2010 till July 2013.
Is there anyone who can give me a yes or no, whether this would work or not? Wipe it all out, start fresh with a new SL installation and back up from that July 2013 backup?Yes it is. That is why you got a set of reinstal disc with your Mac. For just this purpose.
But if you have a 2009 model it might of come with Leopard. But you should still be able to use that reinstall disc or the retain Snow Leopard DVD you used to upgrade to SL to restore your Mac from a Time Machine backup.
First you need to boot the system from either the original reinstall DVD or the retail SL DVD and use Disk Utility to Repartition the drive as One Partition. you MUST do that to get rid of the Mt Lion Recovery HD partition. Once that is done there should be an option to Restaore your Mac from a TM backup. Have the backup drive connected before you start the system from the Reinstall DVD, either of them whichever you chose. -
I tried to launch photoshop CS 5.1 design premium suite. It did not launch.( Have not had a problem before this) Received a message which said that I had to uninstall it and then reinstall....but first had to download Java se6. I installed Java...
it gave me Java OX 2014-001.Message: that version supercedes all previous versions of Java.
Went back to PS suite icon and uninstalled all. I have been unable to figure out how to
reinstall this program. The only thing that I could find was a very grey icon with an arrow that said "finder".
Went to the finder icon, searched with NO SUCCESS. Please help. I have read several blogs and many people seem to be having
this problem. Note. I recently upgraded to Yosemite. jude obscure. Thank youThanks for reply. Will search for the answer on forum . Just found the forum website about 2 days ago.
Adobe help contacted me. Offered an $1,800. upgrade to PS 6. Not a good choice. Was very happy
with PS 5 design suite. Will try to figure out how to download PS updates and manually apply them.
Adobe person walked me thru a download process for PS 5....last night.
After 2:30 am I installed PS 5 design suite. I now have a PS 5 D.S. icon with a red disc on desktop..
but am unable to install it. Will continue to search for way to apply it. thanks again. -
The new firefox twitter app (mini tab on left of page) is great - except it disappears every time I shut down the computer and I have to remove and then reinstall it every day!?? It won't appear on the page until I do. I am working on an iMac - if that is causing the problem ...? Thanks.
Eustace, thank you so much for writing back. I will try what you suggested!!
thx for your reply - apparently when I went to the Apple store a long time ago, they restore maybe photos and itunes etc from my external hard drive (passport). I guess at that time they reinstalled an earlier operating system than my macbook came with and that somehow corrupted FileVault. apparently there was no sparse bundle (whatever that is) for my old admin account and they said that ever since the install of the older OS that it was actually NEVER backing up anything in my admin account.
Then, I bought Time Capsule and starting backing up to that instead. I started having problems with it being slow etc and then StartUp Disk full errors and didn't know what to do, so I "Restored" from Time Capsule and that's when I lost everything in my Admin account and was locked out when I tried to log in - it said File Vault error ..."
anyway - that's THAT sad story. I was told to create a new admin account and I've basically been trying to start over - even though I have a partial save of my computer in Crash Plan and I DO see a sparse bundle listed in there, but I just don't know enough about computers to know if it's something I can get back or if I am just totally doomed.
I'm afraid to reinstall anything because if there is even a remote shot that the other files are still floating around in my computer, I feel like that chance will be shot forever. I need to hire McGee from NCIS, I just KNOW he could get those files back for me!!!
Maybe you are looking for
-
Vid card for TV to HD Display yet?????/
Aloha All, I am wondering where to find a vid card that allows cable hookup to see tv on my 30" HD display. I am not looking for a unit to record TV. I am looking for a card to fit into the pci express slot and be able to do both computer and TV func
-
Hi All, We are trying to create a datasource based on a table available in MS SQL system. The current BW system(database is oracle) and the MS SQL system are connected using DB Connect. But if the MS SQL table contains any field of type time() , the
-
Xcelsius Enterprise 2008 Installation need in BO server?
Hi All, We have got Xcelsius Enterprise 2008 license. Our goal is to create dashboard by Xcelsius Enterprise 2008 and view through BO Infoview. Do we need to install Xcelsius Enterprise 2008 in Business Objects Server? I think Xcelsius Enterprise 200
-
How to Cancel Delivery which is created in VL04
The user has created the Delivery in VL04. Plz guide me on How to Cancel Delivery which is created in VL04 ? I followed VL09 & VL02 process, but at VL09 it states that PU Withdrawn Qty. exceeded. At VL02 it only shows the Display Mode.
-
Hi Friends, I am tryignt o open SAP IDE (NWDS) , Its not responding. when I see the log :- java.version=1.4.2_12 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US Command-line arguments: -os win32 -ws win3