Just upgraded my ipad2.  can I switch off tabs in Safari?

just upgraded my ipad2 to ios5.  don't want tabs on inSafari, can I switch them off?

You may also want to look at other browsers in the App Store. One of them might be more to your liking. iCab Mobile has both tabs and an interface similar to the older version of Safari. Ironically, I switched to it months again because it offered tabbed browsing when Safari didn't.

Similar Messages

  • Just upgraded to Lion, can't open any pdf file downloaded from internet that was fine with Leopard. How can I overcome this obstacle ?

    Just upgraded to Lion, can't open any pdf file downloaded from the internet that was fine with Leopard before. I just got a black screen when I clicked on a pdf icon on a given internet site, and same happened with several sites that I visited. How can I overcome this obstacle ?

    Try two things with Safari not running:
    1) Launch Adobe Reader, open its preferences, select the Internet category, and check the values under "Display PDF in browser using".  If it's checked, try unchecking it.
    2) Look in /Library/Internet Plug-Ins (at the top-level of your boot volume) for something names AdobePDFViewer.plugin.  If you see such a file, try moving it to a folder named "Disabled Plug-Ins" (if such a folder exists) or onto the Desktop.
    Then see how things work.

  • My MBP 15 inch can't switch off (freeze at blue screen with spinning wheel)

    Whenever i try to "shut down" my MBP, it will freeze at the blue screen with the spinning wheel (that keeps spinning like 'eternally')! Any idea how to solve the problem?
    I tried booting from the installation disk and repairing disk with "disk utility" but to no avail. Have also tried repairing disk permissions... Any idea how else should i tackle this problem?
    Currently i can only switch off my MBP by holding the power button (forcing it to shut down)...
    Please help Thanks!

    Launch the Console application by entering the first few letters of its name into a Spotlight search, and select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the times of the log messages referring to boot times. Now clear the search box and scroll back in the log to the time of the most recent boot when you had the problem. Look for error messages in the minutes before that time, and post them here -- the text, please, not a screenshot. Edit out excessive repeats, if any. Do the same with kernel.log.
    If the logs don't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2 and /private/var/log/kernel.log.0.bz2. Search those archived logs, and if necessary the older ones below them, for the same information.
    Also in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please do not post shutdownStall or hang logs -- they're very long and not helpful.

  • My iPhone is stucked.. Now I can't unlock, Can't switch off.. Plzzzz help me

    My iPhone is stucked.. Now I can't unlock, Can't switch off.. Plzzzz help me

    Reset, hold both home and power buttons for about 10 seconds until the iPhone begins to restart itself.

  • I have just upgraded my Ipad2 to the latest operating system and on restarting it is some foreign language and is asking for the sim card number when I don't have a sim card. What do I do?

    I have just upgraded my Ipad2 to the latest operating system and on restarting it is some foreign language and is asking for the sim card number when I don't have a sim card. What do I do?

    i have to apologize up front for the cheeky response. but i just couldnt resist. if your ipad is speaking in tongues. i would call a priest and perform an exorcism on it first.

  • Just upgraded my ipad2 and iPhone 4S to ios7 and neither are showing the airdrop or airplay icons on the control centre screen. Any ideas?

    Just upgraded my ipad2 and iPhone 4S to ios7 and neither are showing the airdrop or airplay icons on the control centre screen. Any ideas?

    Airdrop is only for iPhone 5 and higher and ipad 4 and up...

  • Hi. I have downloaded the new iOS 6.0 software update but now I can't switch off the shuffle function when playing music. Help please. Stuart

    Hi. I have downloaded the new iOS 6.0 software update but now I can't switch off the shuffle function when playing music. Help please. Stuart

    I have the same problem and haven't been able to figure it out either

  • How can I disable the tabs in safari on the ipad2

    How can I disable the tabs on safari on my ipad2. I hate the tabs!!!

    You can't, Safari on iOS 5 on the iPad uses tabbed browsing. You can try leaving feedback for Apple and maybe in a future update we'll get the choice of tabs or thumbnail/paged browsing : http://www.apple.com/feedback/ipad.html
    In the meantime I think that the (free) Opera browser and the iCab Mobile browser in the app store offer thumbnail browsing to some degree.

  • Just upgraded and now can't access Yahoo IM. What an I do?

    I just upgraded to the newest version of Mozilla and now I can't access Yahoo IM from my Yahoo mail page. I can open and close IM, but when I click on a contact to chat, nothing happens. I get no messenger window to type in and when people send me an IM, I have no window to reply. Help!

    Hi icsailor,
    This sounds like a known issue reported here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=713014
    There was a workaround posted, but I've not tested it myself. Here are the steps.
    # Go into Yahoo Messenger Options - Change the Window in the dropdown to Tab and press OK.
    # Then go back and switch it to small window and press OK.
    Once the bug is officially resolved, you could try running a Nightly or Aurora build to use the fix early.
    Hopefully this helps!

  • CS6: Can't switch off color management in the printerdriver when photoshop manages colors

    So this is weird: I'm using CS6 Extended and Lightroom 5 on a Windows 7 Pro machine, printing to an old Canon Pixma Ip5200R. When i print from Lightroom, i am using a special printer profile for the pixma and my photopaper, so color management is switched off in the printer driver. The photos print fine.
    Now when i print the same photo from CS6, it has a magenta color cast, so clearly something is wrong with the color management. Even though i am using the same printer, the same paper, the same printer profile and  - of course! - had set photoshop to manage the colors, and switched color managent off in the printer driver. The magenta cast could be an indication that the photo is double colormanaged.
    It took my quite a while to find out what happens, and this is really weird: When i re-checked the printer driver settings, i noticed that the color management settings did not stick. The canon printer driver offers the options "driver matching" "windows ICM" "none", e.g. having color management done by the printer driver or windows, or switch color management  off. So when i go to the PS print settings and set it to "photoshop manages colors", add the correct printer profile, i have to check the settings in the printer driver and make sure that color management is set to "none". I set it to "none" and click OK. Now everything should be configured correctly. But it's not - because when i re-check the print driver settings, i see color management is set to "diver matching". I can go to the print driver settings again and agian, but whenever i check, color management is set to "driver matching". This setting simply does not stick. No wonder i get a mangenta cast on my prints, the colors are doublemanaged by photoshop AND my printer driver.
    Now, this is getting weirder: Only the color management settings don't stick. I can change other settings like print quality and the stick.
    But - how do i get rid of this? The culprit seems to be photoshop, not the printer driver. If i print from lightroom, i can change the color management settings in the (very same) printer driver and they stick. When i set the photoshop print dialogue to "printer manages colors" i can change the color management settings in the (very same) printer driver - and they stick! So this looks as if photoshop stops me intentionally from using the correct printer driver settings, that is from switching off the printer drivers color management if it is set to manage colors.
    I have already resetted my personal photoshop preferences, but this changed nothing. What am i missing? What is going wrong? Your help is very appreciated.
    Tobias

    Hi all, Just to let you know that I finally solved my problem myself.
    Essentially what had occurred was that I had updated my Epson driver for my printer , but it hadn't installed, despite informing me that it had! To cut a long story short when I checked in System preferences the older driver for Leopard O/S was still the current driver. I proceeded to ask Epson support for assistance, bu despite their efforts I could not immediately resolve the problem. They were directing me to my Utilities program to remove all traces of my current driver from Printer Utility which did not exist. When I queried this they stated it was not always visible and I should proceed to the next step then install the new driver. Problem was they required me to access this invisible utility in order to complete this process, and yes before you ask I had informed them I was using an Intel Mac with Snow Leopard 10.6.2 O/S. Finally I ignored their advice and took the following steps:
    1. I opened System Preferences and double clicked the Printer & Fax icon.
    2. I highlighted my Epson R2400 Pinter and removed it by clicking the minus sign at the bottom of the Printers window.
    3. Next I did a search and deleted any old drivers for my R2400 that were on my system with the exception of the new Driver.
    4. I restarted my Mac Pro.
    5. I reinstalled my new printer driver which I had previously downloaded from Epson Support.
    6. I restarted my Mac Pro and found that the new driver had installed correctly and full functionality had been returned to the Print Features Dialogue box i.e I could now turn of color management and access advanced features to set the quality of printing using the full spec of the R2400.
    Hope this post will be helpful to others if they have a similar problem
    Regards Denis
    Message was edited by: Denisimo
    Message was edited by: Denisimo

  • Just upgraded and now can't burn... error 4280

    can someone help me please!!!
    i just upgraded to the new iTunes and now i can't burn any CD's...
    i keep getting the error 4280 message...
    a friend built my comp, so don't know all the info about the machine... but this is what i get when i run the CD diagnostics...
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    ECS K7S5A
    iTunes 6.0.1.3
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)\GeForce2 MX/MX 400
    Found aspi32 running.

    Hi icsailor,
    This sounds like a known issue reported here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=713014
    There was a workaround posted, but I've not tested it myself. Here are the steps.
    # Go into Yahoo Messenger Options - Change the Window in the dropdown to Tab and press OK.
    # Then go back and switch it to small window and press OK.
    Once the bug is officially resolved, you could try running a Nightly or Aurora build to use the fix early.
    Hopefully this helps!

  • Can i switch off my tc everyday when i don't use it? can this create troubleshot?

    i want to switch off my time capsule every night (when i don't use my mac). Can this create troubleshot??

    Opinions vary on this.
    One camp reasons that if Apple designed the product to be switched off regularly, they would have included an "Off" switch on the device, or at least a means to turn it off from your computer. None of these options exist.
    The same camp believes that it is better for an electronic component to be left on rather than powered off and powered back up constantly, which places more stress on the electronic components. 
    It's just like the engine in your car, they reason. It gets the most stress when it starts up. Reducing the stress prolongs the life of the device, but it uses more gasoline.
    The other camp believes that it makes no difference whether you power up and power down on a regular basis, and they argue that this saves gasoline (electricity) as well.
    But, this same group has trouble explaining why, if the device should be powered on and off regularly, that there is no "On" or "Off" switch on the device.
    It is a fact that turning off the Time Capsule will force it to lose its connection to the network. Then, it has to re-establish that connection again when it powers up. Usually, it does but the chances of connection issues increase when you do this.
    It is pretty clear what Apple wants you to do. But, it's up to you to decide what you want to do. If you also power down the modem every night, then you might try powering down the Time Capsule as well. This will save some electricity.
    If you start to see that the Time Capsule is losing its network connection fairly often, then maybe you only turn off the Time Capsule when you will be away for longer periods of time.

  • How do I restore when I can't switch off find iphone?

    I have just upgraded to the iphone 6 plus, wanting to restore my old iphone 5 so I can sell it but because the sim is no longer active I can't turn off find my iphone to allow it to restore, any ideas to get around this please?

    Log into your iCloud account on your computer and remove it from "Find my iPhone".
    Follow this article: iCloud: Remove your device from Find My iPhone

  • URGENT-can we switch off the address validation of BOBJ dqm for CRM

    Hi All,
    Is it possible to switch off the address validation of BOBJ dqm for CRM, because we want to use just data cleanisng and de-duplication part of it?
    Thanks

    Hi,
    You can go to SPRO
    Activate/Deactivate ADDRESS_CHECK

  • Can I switch off my computer while my nano is saying "Do not disconnect"?

    Please help me. This morning I couldn't switch my nano off - only on the docking speakers so I looked at the online help, tried resetting and then decided to try the update and or restore. When I plugged the iPod in, iTunes asked me if I wanted to update the software so I said yes, updated it and then the computer said it needed to be switched off. I said I would switch off later (as my nano was plugged in and I didn't want to ruin it). Then I used the software to update the iPod - but afterwarsd it says do not diconnect all the time and iTunes says that the files are being used by another application. I have also tried restoring the iPod twice. Still the same. Now I am stuck with the iPod in the computer saying don't disconnect - WHAT CAN I DO PLEASE!
    nano   Windows XP  

    is it in disc mode? go to the bottom right of your start bar and find the little gray box looking thing with the green arrow pointing left, right click this and hit remove hardware, a dialog box will come up, click stop on usb storage device or whatever it says and it should say it is now safe to remove your hardware and your ipod screen should go to the main menu or the charging screen.

Maybe you are looking for

  • How to customize the data selection on a standard 2LIS_08TRTLP

    Hi All, on the datasource '2LIS_08TRTLP Shipment delivery per stage', I would need to filter on  '0DEL_TYPE delivery type' but it is not part of the standard 'data selection' for this datasource. I have some initial loading issue if I cannot filter d

  • Updating existing PO with new line item

    Hi We are in ECS scenarion. I want to add a new line item to the already existing Po which was transferred to the R/3 system successfylly. I have user pd_po_update and pd_po_save . In pd_po_update I am getting changes = "X"  but in es_guid it seems i

  • SAP HR Structural Authorizations

    Hi Experts, I need a help regarding SAP HR Structural Authorizations. Currently our HR System is set with structural authorizations were in users will be accessing HR Org structure with different pd-profile and HR relationships (with Org units ex: as

  • Which java package conform to xpath&xslt 2.0 specification?

    Or any conforming packages is close to release? thanks..

  • Problems with JCWDE in Win98 (Please help)

    Dear all, I am using the Win98, Sun's JDK 1.3.0, I have also "installed" the JC development KIT 2.1.2, and the CommAPI (from which I can run the BlackBox Examples Properly). The problems are the following and I hope that you might be able to help: 1)