Just upgraded Tiger to Leopard. Clarisworks not supported. I can successfully convert CW4.0 doc's to AW6.0 doc's using MacLink Plus Deluxe but the problem is I than cannot print them or convert to PDF, either.
Just upgraded Tiger to Leopard. Clarisworks not supported. I can successfully convert CW4.0 doc's to AW6.0 doc's using MacLink Plus Deluxe and then work on them but the problem is that I cannot print them. Neither can I convert to PDF.
If I was trying to get someone else to do my work,
I wouldn't be posting this saying what I have said
would I? I'm not unwilling to do the work myself.From what was stated in your OP, it seemed that you
were.I'm sorry if it seemed that way. I don't want something for nothing. I've spent MANY hours, which I don't have, trying to work this out. I have hit a point where I don't think my expertise is going to solve the problem. That's why I've turned to some experts who might say something along the lines of, "Hey, I know what that is...you're compiling against... and on the Unix box, it's compiling against..." I was NOT looking for something like, "See the code below that fixes your problem."
The only problem is that I don't have direct access
to the sun unix machines I'm running the app on,
so I can't run a profiler on it. Ah, okay. So the only knowledge you have of how it
performs on those machines is from your instructor
running it and then telling you how long it took?No. I can SSH into the servers and run the program from a command line. But I wouldn't be able to install any profiler programs.
You could ask your prof to run it with -Xprof or
-Xhprof or whatever. Or you could put in a bunch of
timing statements to get a rough idea of which parts
are making it take that extra 39 minute or whatever.is -Xprof a java command line option? If so, I will look into doing that. Maybe it's available on the machines at school. Thanks for that input.
Similar Messages
-
Just upgraded to snow leopard, downloader apple support drivers for canon mp620. Why won't a printer list display in add printer window?
Assuming the MP620 is connected to your wireless network, then there are two components to this device - the printer and the scanner. The printer uses Canon proprietary software while the scanner is supported by Apple's Bonjour service. So in many cases, you will at least see the scanner, shown as Bonjour Scanner in the Kind column, while the printer can take longer to appear and is shown as canonijnetwork in the Kind column. If you cannot see either then you have a network issue. Try turning off the MP620 for a minute and then turning back on. Then see if the scanner / printer component appears in the Add Printer window. If you still don't see either, then confirm the MP and the Mac are using the same network. If you know the MP's IP address you can use Network Utility to Ping the address. You can also enable Bonjour Bookmarks in Safari preferences and when selected, the MP620 should appear.
-
i just upgraded from snow leopard v10.6.8 to os x mountain lion and my scroll bar has disappeared on all my applications on the internet. does anyone know a patch to get the scroll bar to work.
Open General preferences in System Preferences. You can set the desired scrollbar behavior there.
-
I have just upgraded to snow leopard and ical now wont open. says it is not compatible and is ical 3.0.2 which seems strange as i have a osx10.6.3 . have looked for update but cant find one, what do i do?
Greetings,
It sounds like you have moved iCal from it's normal location and are opening a second copy which is the older version.
The current version of OS X 10.6 is 10.6.8. As you are running 10.6.3 you need the updates. Go to the Apple Menu > Software update and keep doing this until it says all updates have been installed.
Click anywhere on your desktop (the background).
Go to the top of the computer screen and click on "Go" > "Applications"
In this list look for "iCal".
Double-click iCal in this location (which is the proper home for iCal) and see what version it says.
If it reports the correct version you can drag the iCal from the Applications folder to the dock on your screen to add an button for it (if you already have one in the dock, remove it before you drag this one there). Be sure to leave iCal in the Applications folder.
Hope that helps. -
Safari is non-responsive after intitial start up. Before it can load the homepage (google), it will hang and give a perpetual pinwheel until I force quit the program. Safari works in temporary user account but not in my primary user account. I have reinstalled osx via the command-r upon start up and the problem still persists. Any suggestions on how to reinstall or repair safari?
Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
So the mystery continues, but these additional facts will help with the diagnosis, I hope.
Thanks again for your suggestion.
Gordon -
The backups mentioned above only back up NEW photos I took and put them on my cloud. My PC wouldn't recognize my phone without updating to IOS 7. I did some chores and came back to my phone and I have an error message on my iPhone screen. When I log into iTunes, it asks me to restore my phone, but I know that will wipe out the photos for good. Is there any way to get these old pics off my phone before restoring? Very special pics of my little boy on here.
Read this... import photos to your computer...
http://support.apple.com/kb/HT4083 -
How much is it to upgrade form Snow Leopard to Mountain Lion and can it be done in one hit?
How much is it to upgrade form Snow Leopard to Mountain Lion and can it be done in one hit?
Run Software Update to download and install the latest updates for Snow Leopard.
You should now see the App Store icon, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/ -
if you are to update your iphone and after it says the simcard inside is not supported, what can yo do?
That means your phone was hacked to unlock it.
ONLY the carrier it is locked to can authorize unlocking it.
It may no longer be possible to process a legitimate unlock on a phone that was hacked/jailbroken. The hack can do permanent damage.
You can find out who it was locked to and find out if they offer unlocking and if you qualify.
Don't be surprised if you are never able to use it again. It may be permanently bricked. -
I just upgraded to snow leopard and now my intellipoint mouse doesn't work, I tried downloading a new driver and it installs successfully except an extension but it still doesn't work, is this typical of the OS higher than 10.4? Is there any way I can get around this problem?
You need to check with the mouse's developer and see if it's supported or not. That information wouldn't be known by users on this forum.
-
Upgraded to Snow Leopard & am not able to launch PS CS3 extended. Says I need Java SE 6 runtime.
I just upgraded to Snow Leopard (OS 10.8.2) from Lopard and am now not able to launch Photoshop CS3 extended. I get a warning that says: To open “Adobe Photoshop CS3,” you need to install a Java SE 6 runtime. Would you like to check for and install one? But when I click on "Install" I'm told it is currently unavailable. I need PS to work! What can I do!?
Manually download and install it from Oracle.
M;ylenium -
HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard). However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore. HELP!!
Can you tell us about one or more of the video files - what are they? QuickTime? MP4? Something else? How did you create the video files in the first place?
I do a lot of video and when I upgraded to Snow Leopard I discovered that many of the QT videos that I had created previously (via iMovie & Final Cut) would not play correctly in QuickTime X - the bizarre behavior was that QT X acted as if my video files were only audio files! I reported this to Apple at the time but never heard anything back, and there hasn't been any change in later updates to QT X.
The solution was to (re)install QuickTime 7. But first look in your Applications > Utilities folder. When you upgrade from Leopard to Snow Leopard, the installer normally moves the old QT 7 program to your Utilities folder. If it's there, try using QT 7 to play one of your video files. If QT 7 is not there, you can download and install it from here Make sure you are running at least OS X 10.6.3 before you install QT 7. It's even better if you make sure you are running 10.6.8 which was the last release of Snow Leopard. -
Just upgraded machine, Dreamweaver and Flash not working
I've been using Dreamweaver MX and Flash MX on my old Power Mac G5 for the last 5 years and just upgraded to a new Mac Pro Quad Core Intel Xeon processor. It is a 64 bit system using Mac OS10.6.4.
They do not run on this new machine. Is there any way to get them to run on it?
If not, do I have to pay full price for new software or is there an upgrade available?
Thanks,
Glenn NevillIf you want the new version you would have to pay the full price. The Adobe policy is upgrade once every 3 versions. MX was version 6, CS5 is version 11. I would recommend purchasing the new suite if you can. Otherwise, if it ran under Leopard, you may (I am not positive) be able to run Parallels with 10.5 and run MX in a virtual environment.
-
After a long time, I have just upgraded to Snow Leopard. My computer is seemingly running so much faster, could this be because of the upgrade? The reason it took me so long in the first place is I could not find the location to delete all the used memory. I happened to luck upon a place just the other day that said "all media". From there I was able to go through and get rid of approximately 15GB worth of memory. My computer has been saving multiple copies of all my images. I do not know how to make this stop happening. Has anyone had this experience?
10.6 is faster than 10.5 because of updated video drivers, however the machine will slow down if you upgrade OS X past 10.6.8 as 10.7 and 10.8 are more hardware demanding operating system verisons.
Also 10.7 and 10.8 will not run your PPC based software or older Intel software, requiring all new purchases.
From there I was able to go through and get rid of approximately 15GB worth of memory
What you did was free up 15GB of storage space on your boot drive which if a boot hard drive is getting near full will slow down the comptuers performance. Ideally it's best to stay under 50% filled, but never more than about 80%.
Your "memory" actually refers to the RAM which the processor uses as temporary storage space while it works on things.
Why is my computer slow?
My computer has been saving multiple copies of all my images. I do not know how to make this stop happening. Has anyone had this experience?
Sometimes the duplicates are actually thumbnails, or tiny versions for rapid display in programs like iPhoto with the smaller images to preview before you click the larger version, so they will always be recreated.
Hopefully you didn't delete the original larger files by accident.
The "All Images" is particularly dangerous if not used wisely.
Also it might have been you forget and duplicated the images at one time or another.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
I just upgraded to snow leopard and some of my printers disappeared and I am unable to get them back any ideas
Hello DaveDue
Start your troubleshooting with the article below, you may need to download the printer drivers directly from the manufactures website.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Regards,
-Norm G. -
I have just upgraded to snow leopard and lost my epson printer software. I have checked Epson Aus web site for printer software but they haven't upgraded it for snow leopard. Am i able to download software for a lesser operating system then snow leopard or do i have to purchase a new printer? The model is stylus photo R310.
Have you tried the R300 or R320 software? Typically the software covers a broad spectrum of printers, often providinbg overlap to cover "relatives" of a series.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 47541&prodoid=47915738&infoType=Downloads&platform=Macintosh
Maybe you are looking for
-
BAdI Implementation for Customer/Vendor Basic Data
My requirement is, In vendor and Customer Invoices I need to include a Employee Data [z table] which is a item data and this employee data will be in a table control in the BAdI - BADI_FDCB_SUBBAS01. For doing this, I need a program specifications an
-
I would like to transfer all of my old computer's iTunes library to my new computer's iTunes library which of course is a blank slate. I have the entire library on my iPod nano and tried to deauthorize my old computer, however I found out that would
-
Why does ipad dim after turning off auto dim
my ipad continues to dim slightly back and forth despite the fact i turned off auto dim, why?
-
Energy cut not installing 3000 g series 2049 55q on winxp
when i tried to install the energy cut in my newly bought laptop, it fails saying following error Feature transfer error Feature: HotKey Component: HotKey File: "C:\ Error: The filename, directory name, or volume label syntax is incorrect. OK
-
How to have the Chat history without the Exchange server?
How to have the Chat history without the Exchange server?