Just upgraded to 10.6.3 and now will not recognise old library

When I upgraded to 10.6.3, I got a message asking my to create a new Library. OK I thought Apple knows what it is doing. So I created a new Library - itunes1 and now when opening itunes it is itunes1 and empty of all music, podcasts and playlists.
How do I get them back? I am running windows 7

Actually thanks, have sorted it by deleting itunes and repairing, then whe nasked for itunes library not creating a new one - moron, just pointing it at the old one

Similar Messages

Just upgraded to iOS5 on ipad2 and now have all my old emails to delete. Is there a way to select all like in trash and then delete all?

just upgraded to iOS5 on ipad2 and now have all my old emails to delete. Is there a way to select all like in trash and then delete all?

Thanks for the feedback, the question is that it will syn all the folders that I have checked, and its total up to 6000 photos which was taking me one whole day to syn. I am seeking is there away that what have already in my Iphone will not be delected if I did not checked on the next syn, and only add in the new album that was checked.

Just upgraded to OS X Mavericks and mail will not open

Just upgraded to OS X Mavericks and mail will not open

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Upgraded to 3.6.9 and now will not bookmark, automatically reloaded 3.6.2 twice, now on 3.6.10 same problem with bookmarking, safe mode makes no difference

After upgrading to 3.6.9 firfox will not bookmark some pages, once would not load, has twice atomatically re-installed 3.6.2. Upgraded again to 3.6.10 had have same problem with bookmarking

The answer is in the diagnostic! Go to the Toshiba site (I've been so nice and found the link for you!)
http://www.toshiba-europe.com/storage/Index.asp?page=PFT&nav=ISH_ARC&model=SDR22 12
Try updating your drives firmware. Click 'Firware Updates' on the right hand side of this page, then follow the instructions and download the update, then install. See if that helps. Its worth updating the firmware anyway :P

I just upgraded to LR6 from LR5 and it will not load.

When I start it, the opening screen comes up along with the Library page. The last processed image is there but it's under the LR6 opening image. The small "Loading" dialog box is there, but it's not doing anything. I've rebooted, deleted LR5, rebooted and have let it sit for 15 minutes. I then click on Library and the upper part of the screen goes black and the mouse pointer turns into a circle and just sits. If I click again, the screen becomes a translucent white and that's the end. I get the "Program is not responding" dialog box. I have to close the program. I've done this several times with no change. Any ideas?
David

Well, I tried a couple of suggestions I got from other sites to no avail. Then I deleted LR6 and reloaded it....same result. I guess that means that I will have to contact support via phone. That doesn't make me happy and why? Because they will tell me to do this, that and there fore which should have been written into the software in the first place. I have a "regular" computer; a Win7 64 bit machine on which LR5.7 works just fine.
David

While upgrading Mavericks computer shut down and now will not reboot after pressing power button or in safe mode

MMacBook pro running mavericks. Updating to latest version of Mavericks computer did not restart. Could not boot into safe mode either. Spinning wheel goes on and on

Try a SMC reset:
http://support.apple.com/en-us/HT3964
Ciao.

I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac

I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be seperated. What is going on here?

I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be separated. What is going on here?

I noticed the same problem after upgrading a few iPhones to IOS 8, all use the same Apple ID. However, I now notice when I go into Message and instead of selecting a person from my contact list, I start typing their name which brings up a list of people, some of which are not in my contact list and are on one of the other iPhones. There's a circle/exclamation point next to the name which I click on, and one of the options is to "Remove from Recent". How did these names get from one phone to another and how do I remove all "recents"? They do not appear in my contact list. Anyone see this?

I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this

I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
<Email Edited By Host>

You are only as young as you feel......
This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on only the albums or playlists that you want to sync.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want.

I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?

I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?

There is no fix. It simply means that the software is outdated. Adobe would need to release a newer non-PPC version that supports Lion. They may have done that already, I don't know.

How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents

How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents.
I get this error message every time:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2013-05-28 02:28:42 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.3.4.130416
Crashed Module Name: Microsoft Word
Crashed Module Version: 14.3.4.130416
Crashed Module Offset: 0x00938638
Blame Module Name: Microsoft Word
Blame Module Version: 14.3.4.130416
Blame Module Offset: 0x00938638
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
I tried to remove the plist files, but it hasn't worked! Please help!

What version of Microsoft Office for Mac do you have?
Pete

I just upgraded to 10.7.3 and now I can't install any applications.

I just upgraded to 10.7.3 and now I can't install any applications. Everything else in the OS and in applications seems to work OK. After the installers ask for the system password, they do nothing. I doesn't hang; it just won't proceed any further in the install process. I can press the back button and it seems to do that just fine. I repaired the disk permissions, but to no avail.
After I installed 10.7.3, I tried to install an updater that was listed as being recommended for Time Machine users. That was the first time I tried to launch an installer of any sort and it did the same as above. I've gathered since then that the update wasn't necessary and was already included in the 10.7.3 I loaded today.
Any hints?

I'm having a similar problem after installing 10.7.3 and the Messages beta. I've unistalled Mesages with little bit of trouble.. Linc, I followed the step given in your final post any help would be appreciated.
A screenshot of my actual error. I get this error not just for Flash, but also Handbrake. I receieve th error even when I try using a programs automatic update. However, not suprisingly I do not get the message when using Apple's software update.
Step 1 results
com.symantec.kext.internetSecurity (1.3.2f5)
com.symantec.kext.ips (3.2f8)
com.cisco.nke.ipsec (2.0.1)
com.symantec.kext.SymAPComm (11.1.2f17)
Step 2 results
org.macosforge.xquartz.privileged_startx
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon
com.symantec.sharedsettings
com.symantec.Sched501-2.plist
com.symantec.Sched501-1.plist
com.symantec.navapdaemonsl
com.symantec.navapd
com.symantec.MissedTasks.plist
com.symantec.diskMountNotify.plist
com.symantec.avscandaemon
com.micromat.TechToolProDaemon
com.google.keystone.daemon
com.bombich.ccc
Step 3 result
org.macosforge.xquartz.startx
com.symantec.uiagent.application
com.prosofteng.DGMonitor
com.micromat.TechToolProAgent
com.google.keystone.root.agent
com.google.Chrome.framework.service_process/Users/damian/Library/Application_Sup port/Google/Chrome
com.ecamm.printopia
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
Step 4 result
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
Frameworks
NyxAudioAnalysis.framework
PluginManager.framework
R.framework
TSLicense.framework
cisco-vpnclient.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
.DS_Store
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
Unused
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.google.keystone.agent.plist
com.micromat.TechToolProAgent.plist
com.prosofteng.DGMonitor.plist
com.symantec.uiagent.application.plist
org.macosforge.xquartz.startx.plist
/Library/LaunchDaemons:
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.google.keystone.daemon.plist
com.micromat.TechToolProDaemon.plist
com.symantec.MissedTasks.plist
com.symantec.Sched501-1.plist
com.symantec.Sched501-2.plist
com.symantec.avscandaemon.plist
com.symantec.diskMountNotify.plist
com.symantec.navapd.plist
com.symantec.navapdaemonsl.plist
com.symantec.sharedsettings.plist
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon.plist
org.macosforge.xquartz.privileged_startx.plist
/Library/PreferencePanes:
Flash Player.prefPane
Flip4Mac WMV.prefPane
SymantecQuickMenu.prefPane
TechTool Protection.prefPane
/Library/PrivateFrameworks:
SymAVScan.framework
SymAppKitAdditions.framework
SymBase.framework
SymDaemon.framework
SymIPS.framework
SymIR.framework
SymInternetSecurity.framework
SymScheduler.framework
SymSharedSettings.framework
SymSubmission.framework
SymUIAgent.framework
SymUIAgentUI.framework
/Library/PrivilegedHelperTools:
com.bombich.ccc
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Google Earth Web Plug-in.plugin
WebEx.plugin
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.E9E876AD-F4B4-43BE-A4F2-EC7 33492E799.plist
com.ecamm.printopia.plist
com.google.Chrome.framework.plist
Library/PreferencePanes:
Printopia.prefPane
Step 5 result
AdobeResourceSynchronizer, iTunesHelper, Air Video Server

Just upgraded to iTunes 10.6 and now it says it does not support Quicktime

Just upgraded to iTunes 10.6 and now it says it does not support Quicktime. Not much more to add. It's a MacPro running Lion.

warren.b.paul wrote:
So, I have managed to fix the problem.
I found that the upgrade had replaced my library files with empty ones.
So I restored the backup I made of them before the upgrade and
now all my media is back.
Great..
For those who run across this therad and haven't taken the effort to make a backup here is another approach that should work.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

I just upgraded to mountain lion osx and now my applications are crossed out and out of date. they will not run. how do i fix this?

I just upgraded to mountain lion osx and now my applications are crossed out and out of date. they will not run. how do i fix this?

Here is a recent post I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions if they are available, or find alternative software that will open, modify and save your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on images to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

Just upgraded to 10.6.3 and now will not recognise old library

Similar Messages

Maybe you are looking for