Just upgraded to FF 12 from FF 3.6 and most of my favicons are now dotted line squares. Any way to get the favicons associated with each web site to load?

Just upgraded to FF 12 from FF 3.6 and most of my favicons are now dotted line squares. Any way to get the favicons associated with each web site to load? I've seen some suggested code to add but I'm not web code savvy. Thanx!

The CheckPlaces extension can restore favicons. It is also great for checking bookmarks to ensure that they are still valid.
* https://addons.mozilla.org/en-US/firefox/addon/checkplaces/

Similar Messages

  • I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

    I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

    Niel...
    I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
    thank you for your time and help,
    Dennis

  • Recently "lost" a purchased song, (Plus the accompanying artwork) from my i-tunes library, after upgrading my O.S. from windows XP to windows 7.  Is there any way to get the original song back, or, at least, re-purchase it?... I tried t

    recently "lost" a purchased song, (Plus the accompanying artwork) from my i-tunes library, after upgrading my O.S. from windows XP to windows 7.
    Is there any way to get the original song back, or, at least, re-purchase it?... I tried to do the latter, (It's still available in the itunes store) but, when I clicked on the buy link, I was informed that I had already bought it and was only given the option to, either, copy the link or send it to Facebook/Twitter
    I also, inadvertently, deleted a couple of default playlists (Notably recently added) while attempting to get the song back.
    Can someone out there, please, help me out. with the solution(s). (preferably step by step if possible, as I'm a bit of a Homer Simpson when it comes to this sort of thing) .. Doh!! :-(

    Hello, MrKite549. 
    Here is an article that will walk you through download any past purchases that are missing from your iTunes library. 
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    Cheers,
    Jason H. 

  • I just updated my iPhone 4 to iOS6 and now my calendar, contacts, etc. are gone.  Is there any way to get this info back?

    I just updated my iPhone 4 to iOS6 and now my calendar, contacts, notes, etc. are gone.  Is there any way to get that information back?  I thought those things were automatically backed up in the first step of the update process.

    The only restore I can find is from 2010.

  • Is there any way to get the files from other computer ?

    Hai all,
    I have 2 computers connected. I know the IP address of other computer. Is there any way to get the files from other computer. (for e.g. I want to get the files from specific folder. In Java netwroking is it possible? (Any programs)
    regards,
    Namanc

    Bro Take it easy.
    Think you need to send a Image file named ("abc.gif")
    now develop a server using ServerSocket and connect it in local IP and any PORT
    For example i think ur server is connected in "localhost" and 9000 port.
    Now make ur server educated using some commands.
    For example:
    FileName: <File Name String>
    [Means new file is sending by connected client]
    FileSize: <File size long or int value>
    [ So that ur server can determind about the total length of sender file]
    DataModeOpen
    [Now your client will send its image data, this command means your client software is sending data]
    fjadlkfjaofaijojfwoeiurfodkjflsajlfksa
    l23j4lj23lkjlasjfoq23j4rokjelfkjasldkf
    2o3j4lk2j3ljslakdjf2l3j4 l23kjlk23k4j
    DataModeClose
    [Means file sending finished]
    Close
    [Means your client connection is closed]
    Now develop a client supporting this command.
    For example(Server):
    String getFileName=null;
    long getFileSize=0;
    public handleCommand(String getCmd) {
        if(getCmd.startsWith("FileName")) {
                String[] splitData=getCmd.split(":");
                this.getFileName=   splitData[1];
                outPutStream.writeBytes("+OK");
        } else if(getCmd.startsWith("FileSize")) {
                String[] splitData=getCmd.split(":");
                this.getFileSize=Long.parseLong(splitData[1]);
                outPutStream.writeBytes("+OK");
        } else if(getCmd.startsWith("DataModeOpen")) {
               //data mode open so receive data
              receiveData();
              outPutStream.writeBytes("+OK");
        } else if(getCmd.startsWith("DataModeClose")) {
              //close client socket
             getClientSocket.close();
    }For client:
    DataInputStream dataIn=null;
    BufferedOutputStream bout=null;
    public sendFile(bytes[] getBytes) {
            //if ok found then do other or show error message
        if(sendCmd("FileName:"+getFileName)) {
            if(sendCmd("FileSize:"+getFileSize)) {
                if(sendCmd("DataModeOpen")) {
                   bout.write(getBytes);
                } else {
                   showError(3);
            } else {
                   showError(2);
       } else {
            showError(1);
    }i think it will help u

  • I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book

    I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book back as i have already paid for it once and i would not like to pay for it twice.

    If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Is there any way to get the query used in discoverer from backend??

    Hi All,
    I am new to dicoverer.
    Is there any way to get the query used in discoverer from backend??
    Thanks,
    Sachin

    Hi,
    you can view the SQL from within the discoverer menu:
    in desktop: View-> SQL Inspector
    in Plus: Tools-> Show SQL
    The SQL in the DB tables is encrypted so it's a problem getting it from there.
    You can export the workbook into SQL but it is not working for every worksheet (subquery, inline pivot tables...)
    you can create a batch file to export them all using the output of this script:
    select null,null,'echo off'
    from dual
    union all
    select distinct
    qs.qs_doc_name Workbook_name,
    qs.qs_doc_details Worksheet_Name,
    'start /wait <path>\dis51usr.exe /connect '||'&p_user_name'||'/'||'&p_password'||'@'||'&p_env'||' /apps_user /apps_responsibility "&responsibility" /opendb '||
    chr(34)||qs.qs_doc_name||chr(34)||' /sheet "'||qs.qs_doc_details||'"'||' /export SQL "C:\Export Discoverer SQL\'||qs.qs_doc_name||'-'||qs.qs_doc_details||'.sql" /batch'
    from eul_us.eul5_qpp_stats qs
    where qs.qs_doc_name is not null
    --order by 1,2
    union all
    select null,null,'echo off'
    from dual
    union all
    select null,null,'exit'
    from dual

  • Is there any way to get the file for your site from Creative Cloud?

    I lost the file for my Muse site and was wondering if there was any way to get the file from the server or from somewhere in Creative Cloud.
    Thanks.

    Are you Mac or Windows?

  • Is there any way to get the apple stock photos as wallpaper? From the iPhone features page?

    I want this picture.
    http://www.apple.com/iphone/features/
    The picture on the black phone next to the 4 inch retina display section. Is there any way to get it? Is it a default photo or wallpaper of iPhone 5?

    It has always been very basic to always maintain a backup copy of your computer/files/docs/pics/music/etc, for just such an occasion.
    Use your backup copy to put everything back.
    If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod:  File>Transfer Purchases
    Once the music is in itunes on your computer, then you can sync to your iphone.

  • Is there any way to get the music from my iPod on to my iPhone. My iTunes was deleted off my computer . Anyway to recover the music?

    Ok wy iTunes got deletes off my computer and I had an iPod 3 now I have an iPhone 4 And I Reyes to buy some music using the same iTunes account but it says purchased and I'm just wonderin if there is anyway I can get the music I had on my iPod to my iPhone?

    It has always been very basic to always maintain a backup copy of your computer/files/docs/pics/music/etc, for just such an occasion.
    Use your backup copy to put everything back.
    If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod:  File>Transfer Purchases
    Once the music is in itunes on your computer, then you can sync to your iphone.

  • HT1296 i had to have my computers hard drive reformated so of course lost all the music in itunes. Is there any way to get the music from my ipod back on my computer and add new music to ipod?

    After reformating my computer isit possible to get the music from my ipod back on the computer and to add new music that I have downloaded?

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • What is the simplest way to invoke the command associated with an existing menu item from a plugin?

    Hey there,
    My specific task is to bring forward the "Swatches" window.  I want to initiate this from my plugin code (C++).  However, I may want to execute other menu items in the future, so understanding the simplest, most straightforward general mechanism would be great.
    I've pieced together a sequence that could work using the Menu and Interface suites, but it seems more complicated than it should be and requires knowledge of the localized name of the menu item (incomplete and uncompiled sample code below).  Is there a better way to do this?
    // Get the menu item handle by walking all items to find the swatches item
    long numMenuItems = 0;
    sAIMenu->CountMenuItems( &numMenuItems );
    AIMenuItemHandle menuItemHandle;
    ai::UnicodeString localizedItemName;
    for ( long menuItemIndex = 0; menuItemIndex < numMenuItems; ++menuItemIndex )
        sAIMenu->GetNthMenuItem( menuItemIndex, &menuItemHandle );
        sAIMenu->GetItemText( menuItemHandle, localizedItemName );
        if ( localizedItemName == “Swatches” )
            break;
    AIBoolean bchecked =false;
    sAIMenu->IsItemChecked( menuItemHandle,
                            &bchecked );
    if ( !bchecked )
       // Find the plugin responsible for adding and responding to the menu item
        SPPluginRef swatchPlugin;
        sAIMenu->GetMenuItemPlugin( menuItemHandle, &swatchPlugin );
       // Construct and send a message to the plugin instructing it to execute as if the menu item were invoke by the user
        AIMenuMessage message;
        sSPInterface->SetupMessageData( swatchPlugin, &message.d );
        message.menuItem = menuItemHandle;
        SPErr result;
        sSPInterface->SendMessage( swatchPlugin, kAIMenuCaller, kSelectorAIGoMenuItem, &message, &result );
        sSPInterface->EmptyMessageData( swatchPlugin, &message.d );
    Glen.

    That's a clever solution to a problem I'd never considered (but can see how others might need it) I can't think of a better way to invoke it though than what you're doing except maybe with some minor improvements. If you know the menu group, you can use AIMenuSuite::GetMenuGroupRange() to jump to that group in the overall list. Also, since menuitems seem extremely unlikely to change, you can probably cache the handle.
    Beyond that, the usual suggestion I'd make it is to at least explore actions. Try recording an action and see if it even picks up when you display the Swatches panel. I'm guessing it doesn't record stuff like that, but who knows?

  • Is there any way to get the phone from taking over...

    Whenever I start my Avalon, the phone says that it is "Starting Driving Mode for You", and then starts playing music.  It changes whatever channel I have on, and will even start up Audio if I have it shut off.
    This is really a pain.  Is there any way, short of killing the bluetooth pairing, to tell the phone to leave my radio alone?
    Thanks.

    Hi Jay___S,
    Welcome to the forum! 
    For which specific phone model is this? If this is for a Lumia WP8, are you using the built-in 'driving mode' app under Settings, or a downloaded car mode app from the Store? Has the phone been paired with other Bluetooth devices aside from your Avalon carkit, like car speakers or stereos? Is your phone's software updated when checked under Settings > Phone update? 
    We'll wait for your response. 

  • I have just upgraded my 2 apple computers to OX Lion and my macbook pro is having ip address issues. I have manually changed the ip address, renewed lease which works but everytime I switch on it does not connect to wi fi until I edit the ip address.

    I recently upgraded to OX Lion and have an ipod, ipad, iphone and other apple mac computer on the network besides my macbook pro.
    Since the upgrade I am having issues with my ip address. I have edited this number under renew lease, taken it to a manual edit and on any of these occassions found an address which allows the computer to go on wi fi.
    However everytime I use my computer it starts off without wi fi and I have to manually go back to ip address and either adjust to manual or renew lease.
    Any ideas?

    While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer.  https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • HT4623 i just had to restore my phone - lost everything and now when i tried to restore my settings and memory ALL my daughters stuff came up - is there any way to get my stuff back to my phone

    I had to restore my settings - my phone shut down - so when i put it in computer ALL my daughters memory came to my phone - how do I get my stuff back on my phone

    Did you backup your iPhone to iTunes?
    You can restore your iPhone from a backup.
    If there are multiple backup devices, look for your backup and restore yoyr iPhone from that backup.

Maybe you are looking for

  • Interactive booklets no longer play in iTunes

    All my interactive booklets from albums I bought at the iTunes Store no longer play! I am running Leopard with all the latest updates to my software. Thanks for any suggestions.

  • Indexing multiple documents in one BLOB?

    Hello, I need to index a bundle of documents (PDF, DOC, PPT...) as a unit with one index and probably a key identifying the bundle. So that not every document must match the searchstring to be found by the user, but the whole bundle is searched for c

  • What is the best site for Safari release schedules

    My group has the responsibility for performing browser compatibility testing.  I am looking for the best site for tracking Safari release schedules, so we might be able to plan our testing cycles using the latest Safari versions for Windows and Mac. 

  • Analyser for Excel and Microsoft Visual J# Framework ???

    Hi In BIP, I open the report sample "Employee Salary Report" with "Advanced Page Totals" template and then I click "Analyzer for Excel" After activate the macro and the report be opened in Excel, I choose the option "Oracle BI Publisher -> Connection

  • S5 back to IPhone 5

    Hello I switched to an S5 Active from IPhone 5 about a year ago and would like to switch back to IPhone without having to pay off my next contract and paying for a new phone. Can I just go to my local AT&T store and have the activate my sim card in t