Just upgraded to ISO8 and now my iphone 4s won't connect to home wifi - keeps telling me that the password is incorrect when it's not - help please.......

Please help me - I've just upgraded my Iphone 4s to ISO8 and now I can't connect to wifi - was at my friends yesterday - always use his wifi and even though the password was correct, it wouldn't accept it. Came home and had the same problem. I can't use my data plan as it wouldn't be enough so now it's chewing through it.........The only thing I did different was upgrade......... I'm not computer savy so please leave me step by step instruction on how to fix if you can. I've tried rebooting etc and turning everything off - no luck.......

Have you tried resetting the network settings? Sometimes starting from scratch solves the issue and it is the simplest way I can think of that may solve your problem.
1. Go to Settings > General > Reset
2. Then select Reset Network Settings
3. Enter your password when it requests it
After the phone finishes the reset try adding your Wi-Fi again and see if that works. If not, I would back-up your phone to your computer, then reset the whole phone by following the same instructions above, but choosing Reset All Content and Settings at step two. Make sure you backup your phone first though! Otherwise you will lose all the stuff on your phone when you make this selection.
Good luck!

Similar Messages

TS3899 why does my iphone 5S keep telling me that my password is incorrect when I know it is correct?

I have a new iphone 5S (I have and used iPhones for years) and am having trouble with my email. I am told that my passwords for several accounts are incorrect. I have checked the passwords and written them in to the mail accounts. I see the check marks appear telling me thst they have been verified, then a few monents later I get the passwork error mnessage again about passwords.
What is going on and how do I rectify it?
Ray

I'm having exactly the same problem. Email accounts have worked on all previous iPhones. Just recently I'm getting error messages telling me the passwords are incorrect and would I like to re-enter them. I re-enter them and as always get all green checkmarks as if everything is fine. Next day, same error.
Anyone have an explanation?

My i massage docent want to work!! And it keeps telling me that the password is wrong when is not?? Help plz

My i massage docent work!! When i try to sing in to i massage it tells me that my password is wrong when is not?? Help plz

http://www.apple.com/support/icloud/systemstatus/

Icloud keeps telling me that my password is wrong when I try to back up my Iphone. It is definitely correct and works everywhere else.

Why does Icloud keep telling me that my password is wrong when it works everywhere else, eg. the App Store and etc.?

http://www.apple.com/support/icloud/systemstatus/

IPhone 6 won't connect to home WiFi - Password Incorrect!

So, I got my brand new iPhone 6 yesterday.. Everything seems to work fine, except for internet connection..
Every time I attempt to connect, it rejects me, and tells me that the password is incorrect.
I also, can't really reach the the network by walking only 10 meters away.. I really have to stand right next to the router to get a chance.
I've tried reseting my phone completely, and it still doesn't work.
I can easily connect at school, that why I really can't decide if it's a hardware issue, or if it's my home network.
I just don't get it... Because we're a lot of users at home, we got tons of devices connected to the specific network. And its working impeccable.
So my question is.... Does this have something to do with iOS 8 and it's wellknown bugs, or do I have to get my iPhone replaced?

I just tried this and it worked, hopefully it works for you too, I have spent the last 3 hours trying to figure this out and nothing worked, I tried rebooting both my phone and the router, turning the airplane mode, etc etc I even took the password requirement off my router and still it would say "unable to join network"
All along it was my router and not my phone.
The routers have a list of allowed devices, called MAC filtering addresses, I had to manually add my phone's address and that fixed the "incorrect password issue"
I went to General > About > Wi-Fi address (copy that long number/letters thing) then log into your router and access the MAC filtering allowed devices list and enter that address in there and save it, that indicates to your router that your phone is allowed to access the network.
As soon as my husband added that address I tried entering the network password on my phone and finally it connected
Good luck!

TS1398 my ipad and now my iphone will no longer connect to my wifi. I have done everything I have read to do. help

I have had my ipad for about one year. Recently it started dropping the wifi. I would have to go to settings and choose my network. Then it would not connect at all. I went online looking for solutions. I tried everything. Nothing helped. I also have an iphone4S that I just got about 2 months ago. It has now also lost connection to my wifi. I need help. Thanks, Lorie

Power cycle the Wi-Fi router/access point.

My iphone got stolen and the find my iphone App doesnt work for me. It keeps telling me that the iphone is off....!!what to do?? please

" action will take afect when this iphone conects to the internet... " BUT whats now??

Report the theft to the police.
Change your passwords as soon as possible.
And alert your carrier about the theft.
Léonie

I just upgraded to premium and now I can't hear my music

I just upgraded to premium and now I can't hear my music. And add to join premium keeps popping up when I try to listen but I'd already joined. Very frustrating. How do I get in touch with someone?

Hello: Is this happening on an iPhone or a Windows PC as both posts have different systems posted about?

TS4062 I've just 'upgraded' my ipod and now my G5 can no longer talk to my ipod.

I've just 'upgraded' my ipod and now my G5 can no longer talk to my ipod.
Why can I not just transfer my ipod (music, movies etc) info to my other macbooks? This service stinks.

Are you running Leopard? If so, try updating to iTunes 10.6.3.25.
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3

I just upgraded to yellowstone and now my apple tv is telling me it is not compatible with HDCP. What can I do to resolve the problem?

I just upgraded to yellowstone and now my apple tv is telling me it is not compatible with HDCP. What can I do to resolve the problem?

Hi billzundel17,
If you are having an issue with your Apple TV telling you it can not play HDCP content, I would suggest that you troubleshoot using the steps in this article -
Apple TV (2nd and 3rd generation): About Apple TV and HDCP - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???

I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPHardwareDataType | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | grep -v 'ag$' | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`find -L {/,}L*/Lau* -type f -exec sh -c 'file -b "$1" | grep -qw XML' {} {} \; -print | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`find -L /{S*/,}L*/Star* -type f -exec sh -c 'file -b "$1" | egrep -q "XML|bin|exec"' {} {} \; -print`; Pm "StartupItems"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HELP!!!! Just upgrade to Tiger and now nothing works

Please help me iv just upgraded to tiger and now none of my programs will open they crash on start-up, and also when i restart i get a little box with a blue globe inside it. then it goes to the unhappy face in a folder icon, then eventually it starts up. Please help me im buggerd without the mac.

Hi Andy!
What size is the Hard Drive, and how much space is avaialble?
How much RAM is installed, and is it original or added?
Did you use a Full Retail Version, of the Tiger Install DVD, to upgrade?
Did you do an Archive & Install, preserving User settings & preferences, installation, and if so, is the Previous System folder still on the HD?
ali b

I have just upgraded to Maverick and now I cannot find certain files. These JPG's are there on my hard drives however . I rely heavily on the search facility and this is slowing me down.

I have just upgraded to Maverick and now I cannot find certain JPG 's . These files do exist however I can find them manually . I rely on the search facility and this is slowing me down, I am having to trawl through stuff to find the file I want , before I would put in part of the title and the machine would find it.

In addition to what Allen says, you may find these search tools helpful:
http://apps.tempel.org/FindAnyFile/
http://www.devontechnologies.com/products/freeware/ - EasyFind
http://www.osxbytes.com/ - iFileX (note the MacUpdate link provided on osxbytes page has a Malware advertisement forMacKeeper, do not download).
Note: you posted to the Classic operating system forum. That refers to Mac operating systems from 2005 and earlier in Classic mode, and Mac operating systems as boot systems on certain 2003 and earlier Macs. Mavericks forum questions normally get answered here:
OS X Mavericks

I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?

I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?

Hey there MattSK123,
Thank you for your question. It sounds like you are unable to see either of your devices in the sidebar of iTunes after a recent update. A number of issues could cause this type of behaviour, and would recommend starting with the troubleshooting from the article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If the issue is not resolved, I would next re install iTunes from either of the following articles depending on the version of Windows you have:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Or
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
Thank you for using Apple Support Communities.
Take care,
Sterling

I updated iTunes to 11.1.4 and now my iPhone 4S won't show up in iTunes.

I updated iTunes on my laptop to 11.1.4 and now my iPhone 4S won't show up in iTunes. I have WIndows 8. My iPhone shows up there, just not in iTUnes as a device.

https://discussions.apple.com/message/24636376#24636376
gck55
Jan 25, 2014 6:00 AM (in response to rcpalladino)
Windows 8.1, 64bit
It appears that the 64bit install messed up the device drivers for the Apple mobilie devices connecting as USB.
I tried many things, I may have missed a step below. But the following is what I believe was the fix - since it worked on a 2nd PC.
Make sure you are using an administrator account. Any of them on your machine will do for the following
a) Get Windows to restart the drivers:
    - disconnect your USB device and close ITunes
    - connect your USB device
    - if ITunes loads, close it.
b) File explorer:
Open File explorer and browse to
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
In that folder there should be a set of files named "usbaapl64...."
right click on the one ending in "INF"
Select Install. It's very quick.
remove the USB device
c) Restart the computer.
When you login again, load ITunes before you attach your USB device.

Just upgraded to ISO8 and now my iphone 4s won't connect to home wifi - keeps telling me that the password is incorrect when it's not - help please.......

Similar Messages

Maybe you are looking for