Just upgraded to iTunes 10.6 and now it says it does not support Quicktime

Just upgraded to iTunes 10.6 and now it says it does not support Quicktime.  Not much more to add.  It's a MacPro running Lion.

warren.b.paul wrote:
So, I have managed to fix the problem.
I found that the upgrade had replaced my library files with empty ones.
So I restored the backup I made of them before the upgrade and
now all my media is back.
Great..
For those who run across this therad and haven't taken the effort to make a backup here is another approach that should work.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Similar Messages

  • Just upgraded to 10.8.2 and now RUSE via Steam does not work

    Now that I have upgraded to 10.8.2, the video game RUSE (opened via Steam) crashes (everytime, always).  It ran fine from 10.6.8.  Any plans to fix this problem?  Ubisoft blames Apple on their support sites....
    Put another way, did I just pay money and spend all day upgrading my system only to lose accessibility to a bunch of programs?

    Mt. Lion will not run any PPC or 32 bit applications.  If you RUSE fits into one of those categories, you might consider a partition or external HDD with Snow Leopard OS on it so that you can play your game.
    Ciao.

  • I've just upgraded to "Lion" from "Snow Leopard" which to my surprise does not support "Appleworks" I've used Appleworks for a number of years for all correspondence etc. and need to continue using this software. Do I need to go back to Snow Leopard?   d

    I've just upgraded to Lion from Snow Leopard and to my surprise it does not support my 'Appleworks' application software. Ihave used Appleworks for all correspondence for six years and need to refer to the files (letters etc.) from time to time. Is my only option to revert back to Snow Leopard?

    The reason appleworks no longer runs is because it is a powerpc based application.  Since it's end-of-life in 2007, it was never converted to intel architecture, since it was dropped as a supported product.  It continued to run on intel machines via rosetta, but OS X Lion formally discontinues all support for powerpc based programs.  Powerpc based applications can only be run on OS X 10.6.8 or earlier releases (ones that still support rosetta).
    So, it does sound like your best option is to move to iWorks' Pages now - otherwise you will be stuck with an increasingly more outdated operating system.  And if you should buy a new machine, it would not run the older versions of OS X anyway, so at some point you have to leave appleworks behind and move on.  Seems best to do it now, before Pages perhaps also moves forward to a point where it too may no longer support ancient file formats.
    http://www.apple.com/support/appleworks/faq/

  • I just got a ipo 4th generation and it keeps saying charging is not supported witht this accessory

    it keeps saying charging is not supporte by this accessory

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Upgraded iphone 4 firmware from 4.3.3 to 5.01 and now it says sim card not supported now

    i just upgraded my iphone 4 firmeware from 4.3.3 to 5.0.1 and after it restarted it says that the sim card doese not appear to be supported.  i already went to the att store and they inserted a new card and tried to activate it and it says the same thing.  my phone work great before the upgrade to the firmware and i read that lots of other people have had the same problem and brought there pnones into an apple store and had them replaced due to the faulty upgrade. what can you do for me

    This is a user to user help forum only, so no one here can do anything for you except provide recommendations.
    Have you tried restoring your iPhone with iTunes?
    If so with no change, make an appointment at an Apple store if there is one nearby.

  • Just upgraded to iTunes 10.4 and now I can no longer...

    1. Drag a playlist that was created in iTunes to either of my iPods.
    2. Rearrange songs within a play list by just dragging them to where I want them.
    Did Apple really kill these features or is there a just a different way of doing it now?

    Ok, I've been researching this for quite some time today and found a thread in which there was a similar issue and it looks like its related to the use of a Wacom tablet. I plugged in a normal mouse and I can now move songs around freely within my playlists again. Hopefully Apple fixes this annoying little bug soon.

  • I just upgraded to iTunes 7.2 and now I can't open it... what should I do?

    Now, whenever I try to open iTunes, it says "iTunes cannot run because it has detected a problem with your audio configuration." I've tried everything: I looked at my audio settings (but I had no idea what I was doing), I tried to repair the file, and I even resorted to deleting it and reinstalling it, BUT NOTHING WILL WORK.
      Windows XP  

    That one is typically caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.) The following document may be of some assistance:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • I just upgraded my eMac to Leopard and now my Mail application will not work.

    It will start to load, but I never get a mail window and it won't accept a new account and will not "Quit" unless I "Force Quit" it.

    It may be helpful to also ask in the Leopard "Mail and Address Book" sub-forum here:
    Mail and Address book (22,773)

  • We just added Maverick to our Mac and now the magic mouse will not scroll with finger tips!!

    We just upgraded our system to Maverick. Now our majic mouse does not respond to the finger swipe at all.
    Also the volume contro;s stopped working on the wireless keyboard.

    Hi davidgraham193,
    Thanks for visiting Apple Support Communities.
    If your Magic Mouse is not scrolling, first go to the Mouse section of System Preferences and try toggling the "Scroll direction: natural" checkbox to see if it has an effect.
    Scroll direction: natural:
    Select this option to move the contents of a window the same direction as your fingers.
    From:
    OS X Mavericks: Change the way your trackpad works
    http://support.apple.com/kb/PH13804
    If the issue persists, see this link for additional troubleshooting steps:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    Best,
    Jeremy

  • I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be seperated. What is going on here?

    I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be separated. What is going on here?

    I noticed the same problem after upgrading a few iPhones to IOS 8, all use the same Apple ID.  However, I now notice when I go into Message and instead of selecting a person from my contact list, I start typing their name which brings up a list of people, some of which are not in my contact list and are on one of the other iPhones. There's a circle/exclamation point next to the name which I click on, and one of the options is to "Remove from Recent". How did these names get from one phone to another and how do I remove all "recents"? They do not appear in my contact list. Anyone see this?

  • I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this

    I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
    <Email Edited By Host>

    You are only as young as you feel......
    This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on only the albums or playlists that you want to sync.
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want.

  • Hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing play

    hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • Help! Have just upgraded my iphone5 to iOS7 and now I can't open my Spreadsheet.

    Help: I have just upgraded my iphone5 to iOS7 and now I can't open my Spreadsheets........

    That one is typically caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.) The following document may be of some assistance:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore.  If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

    I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore.  If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

    I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac

  • I upgraded to iTunes 10.5 and now I can't back up iTunes library to disc.  In previous versions it was in file library backup to disc.  In iTunes 10.5 that is gone!

    I upgraded to iTunes 10.5 and now I can't back up iTunes library to disc.  In previous versions it was in file>library>backup to disc.  In iTunes 10.5 that is gone!

    Some of us have our enture itunes library backed up on CD/DVD - what a waste of time and effort as now presumably you can't use these discs to restore itunes on a new computer! WHY NOT APPLE?
    Very unimpressed with itunes 10.5/ios5 - wifi tracking apps have been removed from the store (and won't function in ios5), it's impossible to sync photos (I have spent a whole day trying to sync my iphone 3GS with itines 10.5) to no avail and now, no CD backup facility.
    I have never had problems with apple before - I was thinking of upgrading my whole system from PC to Mac but now I am doubtful - if this is typical of apple software, I will stay with windows!

Maybe you are looking for

  • How to retieve media files ?

    Dear all, I just updated my Ipad into version 7.0.2 but I lost all photos and other media files after updating, my ipad was stuck in recovery mode (tried to out of recovery mode but didnt work untill I update it) how to retrieve them back, tried some

  • Cannot connect to db using toad

    hi , I get the following error while I try to connect my db using toad and windows sql ========================================================= Fatal OSN connect error 12203, connecting to: (DESCRIPTION=(CONNECT_DATA=(SID=INS)(CID=(PROGRAM=TOAD.exe)

  • IPhone 4 has sticky on / off switch

    My iPhone 4 has developed very stick on/off switch.  Any remedies would be much appreciated

  • HT201328 I want to verify if my iPhone 5 is unlocked

    I do I verify if an iPhone 5 is unlocked.

  • Overlay Creator preview issues

    I'm currently working on creating a tablet publication pitch for a client and followed the directions to install the Folio Producer tools compatible with CS 5.5 and everything seems to be working... except for the preview option on Overlay Creator an