Just upgraded to Lion Mail Not working
Right after upgrade on my Imac 24 And Macbook Pro.
Mail upon launch crashes and when I try to restart I get prompt to
"Restore Windows"
Either choice "Restore Windows" Or "Don't Restore Windows"
gives the same result on both computers.
I tried moving the Smailmailbox.plist and Smailmailbox.plist.backup out of the MAil Data Folder
Still no luck
Any other suggestions?
It's the lion's wifi it's vary sensitive to the signal! you need a version R router bought a Time capsul it's an R.Move your router away from any metel and see if it helps. I just got a 27' imac i7 2TB/SSD my Toshiba i7 worked fine on my old router in a metel shelf unit not this mac! So I bought the Time Capsule $300.00 ouch! my Mac/lion is blazzing fast know and so is my Toshiba i7 windows.The $100. routers in the stores are most likly version R as well but the TC runs 2.4 or 5 GHz at the same time or fix it eather alone. Plus a 2TB back up drive! Now this is not the only problems your going to have with the new OS lion system it went away from Roseta so older softwair dosent work and your chaseing the net for drivers!!!!
Similar Messages
-
I just upgraded to Lion on my work computer.
I just upgraded to Lion on my work computer. Can't connect to iCloud with my @me.com account. I go to system preferences iCloud and put in my email and password and tries to move my MobileMe account to iCloud. Which I had already done. And then show my account status with An error was returned from the server. Please try again later. That is as far as it will let me go.
About 40. They used to sit alphabeticly on the left. When i selected the playlist i wanted songs in the Play list would show up as a list on the right.
-
Upgraded to Lion-internet not working, lost Itunes account
Internet/ wifi not working since I upgraded to Lion, I also lost itunes (being advised to install latest version.) I did back up the laptop prior to upgrading.....
COME ON APPLE- THIS IS STUPID!!!!!It's the lion's wifi it's vary sensitive to the signal! you need a version R router bought a Time capsul it's an R.Move your router away from any metel and see if it helps. I just got a 27' imac i7 2TB/SSD my Toshiba i7 worked fine on my old router in a metel shelf unit not this mac! So I bought the Time Capsule $300.00 ouch! my Mac/lion is blazzing fast know and so is my Toshiba i7 windows.The $100. routers in the stores are most likly version R as well but the TC runs 2.4 or 5 GHz at the same time or fix it eather alone. Plus a 2TB back up drive! Now this is not the only problems your going to have with the new OS lion system it went away from Roseta so older softwair dosent work and your chaseing the net for drivers!!!!
-
Upgraded to lion, safari not working correctly
My home page keeps resetting to last page visited since I upgraded to lion. safri preferences for homepage have no effect. Also, all pages opened earlier are re-opened when safair is re-opened.
All pages opening like that is configurable in System Preferences/General "[√] Restore windows when quitting and re-opening apps"
-
TS3276 Just upgraded to Lion;Mail won't update to Lion
When opening Mail, it's asking me to wait while it sets up. The bar shows it updating but it never completes the update/set up. IdeaS?
If your iPhoto version was iPhoto 7 (08) before you upgraded to Yosemite then you need to download and run/apply the upgrade application to your iPhoto Library before iPhoto 9.6 can open it. Had you run the upgrade app?
-
Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!
what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN -
I have a macbook and I just upgraded to Lion, downloaded the new software for Itunes and added a gmail account in addition to my existing aol account. Altho both mail systems are visible in my mail account I'm no longer receiving emails from either account. I checked the mail doctor and both accounts are connected to the server, but I can't figure out why I'm not receiving emails any longer. I'm trying to clean-up my stuff before I add my new Iphone, but I must admit all of this is rather daunting. Also does anyone know when tech support is available? it must be PST cause no one is there at 8AM EST!
Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
Just upgraded to Lion. Scroll does not respond. Have tried altering preferences. Will not fix. In all applications, including this page, a box appears and seems to randomly move around the screen, resting wherever I begin to work. How can I turn this off and get scroll to work normally?
Have a look at System Preferences, Accessibility, VoiceOver.
(Command - F5).
charlie -
I have just upgraded to Lion and now my VPN connection does not work properly. It was working fine when I was using Leopard. The VPN is My Private Network and we use it to link to BBC iPlayer when abroad. It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site. Any suggestions?
Have a look at System Preferences, Accessibility, VoiceOver.
(Command - F5).
charlie -
I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?
Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
I just upgraded to Lion. I was trying to set up iCloud and it asked for my "login" keychain password. I've never been asked for the keychain password before. I've tried every password I can think of and nothing works. I'm normally asked for the password to my machine when upgrading software, signing on, etc. but this is different apparently. I tried the same password and it didn't work either. I read a couple of posts and they all want to take me through Applications/Utilities but that requires knowing your password in order to change it. I don't know it. Don't remember ever setting up a keychain password. Does anyone know how to change the keychain password if you don't know the keychain password???
Most of the time your Keychain password is the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered. -
Just upgraded to Lion and can not use my QuarkXpress program.
Just upgraded to Lion and can not use my QuarkXpress program.
Your best bet is to check the version of QuarkXPress you have. Since Lion does not include Rosetta my guess is this may be why it is not working. Check out this site http://roaringapps.com/apps:table. This site has a list of apps that work and don't work under Mac OS X Lion.
If you are working in a production environment freelance or stuido that uses design apps like QuarkXPress, Adobe InDesign, Illustrator, Photoshop you should always wait to upgrade your OS. We have a 3 to 6 month policy for upgrading computers and software.
I hope the website helps. http://roaringapps.com/apps:table
Good Luck -
Preview and Mac Mail not working after upgraded to 10.4.11
Hello,
I just upgraded to 10.4 everything works fine, after I upgraded to 10.4.11, I find funny noice on my hard drive and preview, mac mail is not working. Trashing the preference is not working.
Urgent help please.
Thank you
BennyThere are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later). -
I just upgraded to Lion. I just installed iLife'11 last night. When I import photos into iMovie (version 9.0.4.) , it imports the same photo over and over as if it were the ones I selected. Not even one of the photos selected!! The thumbnais show that unselected photo, if I preview then I just see the preview screen all black.
I even tried making an iPhoto album and importing straight from there. Exact same thing. I have restarted the application, restarted the computer, and googled half-to-death. No answers.
Do any of you know how to fix this?
I am working on OS X Lion (10.7.1) , a 2009 15" MacBook Pro. 4GB Memory. 2.4 GHz Intel Core 2 Duo. 4GB Memory 1067 MHz DDR3.
Hope someone can help!!!It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
Mail not working after upgrade
mail not working after upgrade. I have been told my Belkin modem [surf] is not compatable. Would this be the problem?
just solved the problem...
had to delete in user-library-pref-com.apple.mail.plist
then restart mail
www.macbug.de/kategorie/mac-os-x-105-leopard/
Maybe you are looking for
-
How can I print pictures direct from my camera?
How can I print direct from my camera? This printer does not have any ports for accepting the card from the camera as my old photosmart printer did.
-
I can't set up my imessage or facetime with my email because it says "Unable to verify email because it is already in use" which it was with my old ipod but how do i reset it or whatever so that it works with my current ipod?
-
Ipad 2 cant get it to shut down, itunes logo and port on screen
i went to upadate my settings, and it told me i didnt have enough space to download IOS 7, then it locked and a iTunes screen appeared on screen with a picture of port plug, now i cant get it to shut down ive tried the home button and the shut down b
-
BizTalk 2006 R2 Tutorial (EAI) and KB888498
I'm a beginner at BizTalk. I'm trying to go through the tutorial 1 (EAI application) in a lab setup. I'm at the last step where I copied the RepRequestAccepted.xml to the C:\tutorial\Filedrop\ReceiveRequest folder. The file didn't disappear as exp
-
I have had my ZMP for about 2 weeks. It did not come with a DC charger so I must charge it from the USB. I have the lastest firmware installed. My problem is, the player never seems to fully charge. Actually I think that it charges and maybe fully, b