Just upgraded to ML and now 2011 word, excel,OL and Power point wont work
I did the mountain lion upgrade this morning and have just tried to open MS word 2011 to do some quotes and everytime I try and open word, power point, Excel it says
Microsoft word has encountered a problem and needs to close. We are sorry for the inconvenience
error sending is an option which I have done lots
The MS products are all legit purchased products and are for mac
Have tried software update but non are available...
Any one else had this / know a solution
Thanks
Rob
Ok
Just tried totaly removing office from the mac using app cleaner
Re installed office (this is via a legit download site where I paid for the software)
Once installation was complete I tried to open word, power point, excel and OL and non of them will open keep getting the error message and an option to send a report
The updates from microsoft still wont work I just get the same message
Office 2011 14.1.0 update cant be installed on this disk. A version of the software required to install this update was not found on this volume.
LANNY everything is where its supposed to be as it was a re installation of office
ANY IDEAS.......
Rob
Similar Messages
-
My iphone is stuck on the settings screen and the home and lock buttons wont work. I can navigate through the settings but canot go home or turn orr or reset my phone. Please help):
I had the same situation with my iPod touch 5th gen. You can manually reboot it thru pressing sleep/wake button and holding it up to 10 secs - no data will be lost.. This didn't work in mine, but to some it did..
If it won't work, you could do what I did which is I reset all settings in the Reset part. It won't lose any data, just the settings (if you have just less settings did to the device, which I had). So just configure or tweak things again in the settings when it reset again.
Hope this somehow helps! -
My ipod 3g home and power button wont work!
Last night I woke up to find my ipod touch on. IT was probably on for 4-5 hours. I pressed the sleep button but nothing happened. I pressed it over and over but no luck. So I tried press the home and power button on at the same time but nothing happened. Eventually it went to sleep and restarted and the home button worked but not the sleep. I restarted it again and now both of the buttons dont work. I restarted it at least 4 times. Eventually the home but will work but it lags about 40 seconds. During the night my ipod would shut off, shut on, picture, shutt off shut on, picture etc etc. I dont think the buttons are totally busted and I feel like I can fix it. I haven't tried putting it into itunes yet. Someone please help!
-See:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
Some of the above also apply to the Power button. Also see the previous discussions on the right side of this page listed under the heading More Like This.
- Apple will exchange it for a refurbished one for:
Apple - Support - iPod - Repair pricing
- A third-party place like the following will fix the switch for less.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I just upgraded to Lion and want to go back to Snow Leopard ..I have time machine..is there a way?
I just upgraded to Lion and Quicken will not work and not sure if I want to go back to Snow Leopard. I have a timemachine and would like to know if someone could help to either get quicken working or how I can get back to snow leopard?
Did you check the Quicken website before upgrading your Mac? It specifically says that Quicken will not work on Lion.
http://quicken.intuit.com/support/help/install--register--and-convert/quicken-fo r-mac-compatibility-with-mac-osx-10-7-lion/GEN83208.html
Just reinstall Snow Leopard. Should work fine. You can downgrade to previous software as long as the Mac supports the earlier version. If it previously had Snow Leopard, then re-installing is fine.
However!!! If you have a newer computer that was "born with" Lion, you cannot downgrade, as the firmware will not be compatible.
Good Luck! -
TS4062 I've just 'upgraded' my ipod and now my G5 can no longer talk to my ipod.
I've just 'upgraded' my ipod and now my G5 can no longer talk to my ipod.
Why can I not just transfer my ipod (music, movies etc) info to my other macbooks? This service stinks.Are you running Leopard? If so, try updating to iTunes 10.6.3.25.
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3 -
I just upgraded my iphone and now whenever it goes to sleep I have to enter a password to open it. Very frustrating! Can I disable this annoying feature? I went to Settings and disabled the Find My Phone feature thinking that would do it. But it didn't.
I am somewhat infotech-challenged. So I would appreciate help on this. Thank you in advance.Settings > General > Passcode Lock : OFF
Important leave Find My iPhone ON in
Settings > iCloud > Find My iPhone : ON -
I just upgraded to premium and now I can't hear my music
I just upgraded to premium and now I can't hear my music. And add to join premium keeps popping up when I try to listen but I'd already joined. Very frustrating. How do I get in touch with someone?
Hello: Is this happening on an iPhone or a Windows PC as both posts have different systems posted about?
-
I have a imac 10.6.8 with snow leopard. Just upgraded to iphoto 11 Now my computer keeps freezing up mostly if my iphone is connected. It even freezes in safari. Can i get my money back and unistall
This forum is for people to discuss issues with other users. Apple aren't here. No one here can give you your money back. So, contact the the App Store support, if that's where you bought it. There's a link on the right hand side of the App Store window.
Regards
TD -
Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to. I did not have any problems before the upgrade. I would greatly appreciate any light shed on this.
Go to the HP site and look for drivers for your scanner. It apparently needs an updated driver to work with Mavericks.
-
I just upgraded to yellowstone and now my apple tv is telling me it is not compatible with HDCP. What can I do to resolve the problem?
Hi billzundel17,
If you are having an issue with your Apple TV telling you it can not play HDCP content, I would suggest that you troubleshoot using the steps in this article -
Apple TV (2nd and 3rd generation): About Apple TV and HDCP - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
I just upgraded my workstation and render farm to AE CC 2014 and now I receive a "render control file not valid" on my render nodes when I try and render out an image sequence. Any ideas why the update would cause this? All my machines are updated to the latest version of AE CC 2014. Thanks!
Sorry I meant "Update". I was using AE CC, Installed AE CC 2014 on all my machines recently.
-
I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???
This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPHardwareDataType | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | grep -v 'ag$' | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`find -L {/,}L*/Lau* -type f -exec sh -c 'file -b "$1" | grep -qw XML' {} {} \; -print | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`find -L /{S*/,}L*/Star* -type f -exec sh -c 'file -b "$1" | egrep -q "XML|bin|exec"' {} {} \; -print`; Pm "StartupItems"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I have just upgraded to Lion and now my VPN connection does not work properly. It was working fine when I was using Leopard. The VPN is My Private Network and we use it to link to BBC iPlayer when abroad. It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site. Any suggestions?
Have a look at System Preferences, Accessibility, VoiceOver.
(Command - F5).
charlie -
HELP!!!! Just upgrade to Tiger and now nothing works
Please help me iv just upgraded to tiger and now none of my programs will open they crash on start-up, and also when i restart i get a little box with a blue globe inside it. then it goes to the unhappy face in a folder icon, then eventually it starts up. Please help me im buggerd without the mac.
Hi Andy!
What size is the Hard Drive, and how much space is avaialble?
How much RAM is installed, and is it original or added?
Did you use a Full Retail Version, of the Tiger Install DVD, to upgrade?
Did you do an Archive & Install, preserving User settings & preferences, installation, and if so, is the Previous System folder still on the HD?
ali b -
I have just upgraded to Maverick and now I cannot find certain JPG 's . These files do exist however I can find them manually . I rely on the search facility and this is slowing me down, I am having to trawl through stuff to find the file I want , before I would put in part of the title and the machine would find it.
In addition to what Allen says, you may find these search tools helpful:
http://apps.tempel.org/FindAnyFile/
http://www.devontechnologies.com/products/freeware/ - EasyFind
http://www.osxbytes.com/ - iFileX (note the MacUpdate link provided on osxbytes page has a Malware advertisement forMacKeeper, do not download).
Note: you posted to the Classic operating system forum. That refers to Mac operating systems from 2005 and earlier in Classic mode, and Mac operating systems as boot systems on certain 2003 and earlier Macs. Mavericks forum questions normally get answered here:
OS X Mavericks
Maybe you are looking for
-
Problem with my canon ir c3170i
when i print a letter type sheet with my canon ir c3170i printer in the office in landscape for both sides, it prints one side in one way and in the other side in the opposite way. i want to be able to print for both sides in the same direction, what
-
E71 Nokia messaging....sent items do not appear in...
OK, i have an E71 with Nokia messaging install. Generally it works fine however, the other day i needed to refer back to a recently sent email only to discover that my sent box was empty. I immediately sent an email to one of my other accounts, just
-
Content Server Upgrade Error & Installer Error
I'm upgrading Content Server to version 6.0 from version 5.0.3, but during the process the Workflow service was removed and not restored. I tried to run the installation program again to install the workflow server, but it keeps giving me this error
-
Hi, I want to Learn BO, i have good experience in BI, ABAP... I want to know where to start from. I mean which topic should i read first.. Any guidence wil be appreciated Thanks Dipika
-
Hi, Do event listeners exist in JSP (like in SWING)? Is there something similar in JSP? Any info would be appreciated.