Just upgraded to Mt. Lion and I can't sign into Twitter or Flicker with any of my multiple accounts

I just upgraded to Mt. Lion today, and when I try to add additional accounts in "System Preferences" such as Twitter, Flickr etc.  It says "account cann't be verified."
I'm a social media manager for a couple businesses and I tried theirs as well with the same issue.  Restart didn't do the trick, can anyone help?
Thanks!
Alysia

Here is a solution that worked for me, after nothing else would. Log out and back in to iTunes on your Mac/PC.
I had exactly the same problems as above, and no amount of network changes or even a full restore would help.
Finally, I went back to my PC, launched iTunes, logged OUT of that, then signed in again, this time with the new password.
Then I had to go back, and properly close Facetime and iMessages and sign in. It worked fine after that.
(To properly close an application, double click the home button, then hold down on the facetime app logo in the multitasking bar at the bottom, then press the tiny symbol.)
Best of luck.

Similar Messages

  • I just upgraded to mountain lion and I can't figure out how to use messages...  it wants me to use AIM or something like it, but I can't change the user...

    I just upgraded to mountain lion and I can't figure out how to use messages...  it wants me to use AIM or something like it, but I can't change the user... How do I do this??

    See this Thread

  • I have just upgraded to mountain lion and now can not use iphoto how do I get to my photos?

    iPhoto just has a no entry sign on it after up dating to mountain lion how do I now use iPhoto please?

    Hi Anitra,
    Did you updated from OSX Lion to Mountain Lion? And iPhoto was installed on your Mac? Then iPhoto and the Library must still be on your Mac.
    Go to finder and slect 'Applications'. iPhoto must be in that folder. Open iPhoto. See what happens. Are all your pictures/events displayed?
    If not, please reply and we will try to locate the iPhoto Library.

  • I just upgraded to Mountain Lion and when I turned around I noticed my Stickies were gone

    I just upgraded to Mountain Lion and when I turned around I noticed my Stickies with all my secret computer codes and passwords etc. were gone.  I think they are attached to the application and were replaced with the upgrade with a new version...n'es pas?

    Came here looking for a solution to this same problem and presume others will. 
    I found it somewhere else but just want to share the answer!
    go to the SPOTLIGHT search and type in Stickies.
    The app is still on your mac, it just doesn't show in the dock or the Launchpad.
    It opened and all my lovely notes appeared as they were in my Lion install.
    have a nice day!
    EMJ

  • Just upgraded to mountain lion and my HP Laserjet p1102W won't connect

    Just upgraded to mountain lion and my HP Laserjet p1102W to print (worked fine via USB with Snow Leopard; I never had set it up wirelessly, though had wanted to do so.)  HP site said if printer worked with Snow Leopard nothing would need to be done; update of drivers would be automatic within Mountain Lion upgrade.  No such luck.  My Macbook Pro and HP Printer are not talking to each other.  HELP, please!
    I have a Macbook pro. 
    When I tried to print, I was told to get new drivers from HP.  HP site says what I wrote above, that I need do nothing if printer worked with Snow Leapord.  Also read that a new HP Laserjet would need to be connected only via Airprint.  So, I have deleted the printer from the print queue, thinking that might help, but I can't find how to install it via Airprint??  After deleting the printer and having no luck with connecting wirelessly, I tried plugging in USB from printer to MacBook pro, too, thinking maybe that would help, but there is no recognition at all.
    What am I missing???
    Thanks!
    Ani

    Csound1 wrote:
    John Blanchard1 wrote:
    Are you not able to select AirPrint from the menu that lets you select the PPD?
    Do you have the latest firmware?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4110396#N222
    Airprint is for IOS devices and thus has no relevance to this issue.
    Connect the printer to your Wireless Network and use Bonjour to detect nd connect it.
    That's wrong. AirPrint is not just for iOS devices. Since HP doesn't provide drivers for this printer, they say to use AirPrint:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425022&cc=us&dlc=en&lc=en &os=219&product=4110396&sw_lang=

  • Just upgraded to Mac Lion... can't access Appleworks6...get this message... "You can't open the application AppleWorks 6 because PowerPC applications are no longer supported".... I've got dozens of documents saved that I can't access?!!!!!

    Just upgraded to Mac Lion... can't access Appleworks6...get this message... "You can't open the application AppleWorks 6 because PowerPC applications are no longer supported".... I've got dozens of documents saved that I can't access?!!!!!

    Rosetta is not included Lion, if you are not familiar with Rosetta it was an application included in Tiger, Leopard and Snow Leopard that allowed PPC based apps to run on Intel based machines. That was over 5 years ago so it's time to move on. As has been suggested you can read those documents in Pages which is available on the App Store. Pages is part of the iWorks suite that replaced AppleWorks years ago. Currently iWorks is on iWorks 09 , and includes Pages, Numbers and Keynote. You can find each on the App store.

  • HT204291 I have a MBP 13-inch, Mid 2010 and have just upgraded to mountain lion and am trying to connect it to my apple tv however i dont get the air play icon on my mac i have followed all the advise on support anyone able to help??

    I have a MBP 13-inch, Mid 2010 and have just upgraded to mountain lion and am trying to connect it to my apple tv however i dont get the air play icon on my mac i have followed all the advise on support anyone able to help??

    stevie, a third party app called airparrot will give you the pretty much the same as mirroring and forks on Macs too old to mirror.

  • I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

    I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

    I had this and fixed it.
    I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
    After lots of hunting, I found the Signature Folder. It's in:
    Yourusername>Library>Mail>V2>MailData>Signatures
    Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
    Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
    Since this was literally a clone of my previous setup to a new machine, here's what I did:
    1. Quit Mail
    2. In Problem machine, go to
    Yourusername>Library>Mail>V2>MailData>Signatures
    3. Move the Signatures folder someplace safe, but out of the MailData folder
    4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
    5. Start Mail on the problem machine
    This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
    Hope this helps

  • I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films.

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

  • I have recently upgraded to mountain lion and I can not get the calendar application to work. I con appears on the side put on calendars. Any suggestions

    I have recently upgrades to Mountain Lion and I can not get the calendar utility to come alive. Icon appears in the tast bar but the application does not launch or appear to be any where else. Any suggestion?

    Did you look in the Applications folder for Calendar? If it is there, remove the item that is in the Dock and replace it by dragging the Calendar application to the Dock.
    If it is not there, did you have iCal located somewhere other than the Applications folder when you upgraded?

  • I just upgraded to mountain lion and all my mail folders for storing all old emails are gone. How do I get them back?

    I just upgraded to mountain lion and all my mail folders for storing all old emails are gone. How do I get them back?

    Buffzap,
    Make sure that you choose Mail>View>Show Mailbox List, then hover your cursor over one of the subordinate mailbox categories, and you should see "Show." Next click on "Show."

  • I have just upgraded to the 7 and I can't get my iMessages or FaceTime to activate

    I have just upgraded to iOS 7 and I can't activate my iMessages or FaceTime. Pls help

    Hello Dani1970,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Best of luck,
    Mario

  • Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.

    Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.

    The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. You will need the Apple ID and password that you used to upgrade. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted from the disc, the USB device, or Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it under your ID. In that case, contact iTunes Support.

  • Can't sign into apple support communities with icloud apple id

    i realise this isn't the right community for this question, but apple don't have a support category called "apple support".
    i have that problem where I have an appleid called "frumbert", which I got about 10 years ago. it is and always has been tied to my gmail email address. i used this for about 5 years worth of itunes purchases, then forgot it for a couple of years.
    when I got an ipad I also got an icloud account, and stupidly signed up using my gmail email address as my icloud username. it's tied to the same gmail email address as my existing "frumbert" account. i've since made all my itunes and app purchases using my icloud appleid, and it's the one associated with my mac warranties and such.
    so two appleid's share the same email address.
    i can't sign into apple support commuities with it because I need a new username. i can't create a new username because the email address is tied to an account already (this one, the old one, "frumbert"). An account utilizing this email address already exists. Only one account per email address is allowed on Apple Support Communities. Apple's way of saying you're c-ockblocked!
    but I can't also change the "frumbert" account because there's another account with the same email address, my icloud one.
    fark! how does one get out of this mess?

    I'm having the exact same problem and so are a lot of other people. Apple's solution - shut up and create a new account just for the support community.
    Smells outsourced to me!

  • I can not sign into adobe photoshop 10 with my e-mail what should i do

    I can not sign into adobe photoshop 10 with my e-mail what should i do?

    Hi bernedette57waiser,
    Can you provide us with more details about any error messages that you get when you try to log in?
    Thanks,
    Preran    

Maybe you are looking for

  • How to add sub flyout in a flyout

    Hello All,     I have added two to three flyouts in my toolbar. Now I want to add a sub -flyout inside a flyout. how to make it , which object i am supposes to use for it. Please help me.

  • How can I turn off the wireless modem on my HPG5200uk Desktop?

    How can I turn off the wireless modem on my HPG5200uk Desktop? I have an ethernet connection, and don't want to be blasted by unnecessary radio waves. This question was solved. View Solution.

  • Titles not recorded "correctly" in Safari but OK in Chrome and Opera?

    Browsing my site with Opera or Chrome and then checking the browser history, page titles are listed correctly but in Safari they are mostly "Untitled Document." Most helpful to me if someone could check the code on a page and let me know what's awry.

  • Interactive booklet won't play

    I purchased the Superman Returns soundtrack, and the interactive booklet came along with it. Its supposed to open in Preview or a PDF program, but whenever i double click it, nothing happens. Do I need to download Adobe or is something screwing up he

  • Script component runtime error

    I have a  package to update and create contacts from a database to an application. So far it is working fine. But if one of the input columns has null value it throws this error: Condition for attribute 'new_lapinterpreter.new_interpreterlanguage': n