Just upgraded to the latest device software and having problems

Hello Everyone,
I received an email from RIM telling me that I needed to upgrade my phone's (Blackberry Curve 8310) software. I went through the process and now all of my contacts are re-arranged. Before the upgrade I had all of my contacts listed as such: Name of contact; Mobile No.; Home No. etc... Now there is a new contact for each additional number that I have for each contact. Has anyone else experienced this? Anyone know a fix?
Also, my internet browser is gone. I don't have a goto button or anything. Bookmarks are gone... (*slight cursing*). Can anyone help me get my phone back to where it was prior to the update?
Thanks
TexSbennett

please read this article from the public knowledge base :
http://www.blackberry.com/btsc/KB03710
Browser icon does not appear on the BlackBerry smartphone
The upgrade forgot to put the browser back. it is cause 5.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

  • I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. 
    There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I just upgraded to the latest software for my pages.  When I opened an old document it stripped out all the images I had in my tables.  How do I get them back

    I just upgraded to the latest software for my pages.  When I opened an old document it stripped out all the images I had in my tables.  How do I get them back

    Don't save. Close the documents.
    Pages '09 should still be in your Applications/iWork folder.
    Pages 5 will damage/alter older files, something Apple didn't tell its users.
    Pages 5 is a severely stripped down version with over 90+ features removed.
    We recommend trashing/archiving Pages 5 after Exporting any files you may have saved back to Pages '09.
    Also rate/review Pages 5 in the App store.
    Peter

  • TS1702 Just upgraded to the latest iTunes and iPhoto and now cannot change photos on my iPad, can anyone help please?

    Just upgraded to the latest iTunes and iPhoto and now cannot change photos on my iPad, can anyone help please?

    Try one or more of the following:
    > Restart Your Computer
    > Uninstall and Reinstall iTunes
    > Reset iPod (nothing will get deleted)
    > Look in My Computer (Windows 98, XP) OR Computer (Windows Vista or 7) and see if your iPod is in there.
    In some cases (and this happened to me before) plug your iPod in and out your computer a few times. It should get it going. If not, then I strongly recommend starting your computer.

  • Just upgraded to the latest iTunes and cannot delete anything from my iPhone

    Just upgraded to the latest iTunes and cannot delete anything from my iPhone.  I need to delete a playlist to make room for a new one, but Delete does not even show up as an option (nor does the delete key on my keyboard delete anything.

    Could you possibly be more vague?
    If you want help you have to provide details, not just "I can't synch my phone". Why can't you synch?  What error messages do you get?  Give us something.

  • What is the latest device software?

    hi, can you please tell me what is the latest device software official relase for bb 9900 ?

    Change logs are the responsibility of the carriers to release, and so many of them just never do so. In general, a later OS level would be "better" than an older one, as it would contain bug fixes and new features/functions that are absent in the older version. But, nothing more exact than that can be provided...it is up to you to choose the OS level you desire to operate on.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Have just upgraded to the latest iWeb

    Have just upgraded to the latest iWeb and find that when I upload pages with slideshows (via ftp) the slideshows are not showing up at all on-line. Any ideas?

    Try using the File ➙ Publish Entire Site menu option and if that doesn't work you may have to publish your site to a folder on your hard drive and upload the site folder with a 3rd party FTP client like  Cyberduck.
    If you go the Cyberduck route this tutorial might be of interest: #2 - Uploading Only Those Newly Published or Edited Files When Using a 3rd Party FTP Client
    OT

  • HT1926 I cannot download the latest Itunes software, and I am being given the following message. 'The error code is 2324'. Can anyone help???

    I cannot download the latest Itunes software, and I am being given the following message. 'The error code is 2324'. Can anyone help???

    (Apologies for barging in, Steve.)
    I'd also try the fixit from the following Microsoft document:
    Let's try the fixit from the following Microsoft document with that one:
    Fix problems with programs that can't be installed or uninstalled

  • I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions

    I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions

    Hello there, Bromers87.
    It seems that you're having issues with activation of both of these features on your new iPhone 5s. The following Knowledge Base article offers some pointers with issues activating them on your iPhone:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    If it seems that activation has gone through ok, then the following two articles offer in-depth troubleshooting for each application:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    and
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have an iPhone 4, upgraded to the latest iOS software.  Now, cannot send messages to non-iPhone users.  No other settings have been changed.  Thoughts?

    I have an iPhone 4, upgraded to the latest iOS software.  Now, cannot send messages to non-iPhone users.  No other settings have been changed.  Thoughts?

    Hello wbaker252,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Have a nice day,
    Mario

  • I just upgraded to the latest version of iTunes and it duplicated virtually every track in my music library. I need a quick way to delete the duplicates. Sorting by "Date Added" will not help because they are all listed as added on 12/12/2011.

    Library Duplicated
    I just updated to the latest version of iTunes and it duplicated virtually every track in my library. I need a quick way to delete the duplicates. Sorting by "Date Added" will not work, because every track is listed as added on 12/12/2011 even though this happened today 12/19/2011.

    I've written a script called DeDuper which can help remove unwanted duplicates. See this  thread for background.
    tt2

  • I just upgraded to the latest itunes -cant make AIFF's

    Hi, evidently, I  mistakenly upgraded to the latest version of itunes.  On version 10, I had "convert to AIFF' under the "Advanced" drop down menu.  That doesn't seem to be available on the new itunes.  Is there something I'm missing?  Did they discontinue that feature?  If so, how do I revert to the itunes 10?  Also, if they are going to drop features in the future, how can I know NOT to download the latest software versions (short of reading all that mumbo jumbo?)

    Thanks Jim, but when I selected "Preferences" under the I-Tunes tab, , then under "general",then "import settings", it says, "import using:"  WAV encoder, MP3 Encoder, Apple lossless encoder etc, and AIFF encoder
    The box below that, "Setting", is set to automatic.
    I click OK.
    But I-tunes still does not give me an "advanced" tab along the top of the page.  On i-tunes 10, the top bar says I-Tunes, Edit, View, Controls, Store, Advanced, Window and Help.  But I-Tunes  11.01 has all of those choices EXCEPT "advanced".

  • My computer running Windows 8.1 no longer recognizes my 7th Generation Ipod Nano.  I have removed and reinstalled the latest ITunes software and it still doesn't recognize my Ipod.

    I previously installed my Ipod Nano 7th generation in Itunes, Windows 8.1.  When I have recently connected, Itunes does not recognize it.  I removed and reinstalled the latest Itunes software, but no success.  Message says that Itunes sees an Ipod is connected, but does not recognize it.  The USB connection is working fine, as I recharged the Ipod without problem.

    Hello Lynn,
    The article linked below details a number of troubleshooting steps that can help get iTunes to properly recognize your iPhone.
    iPod nano: Error message saying that iPod could not be identified properly
    https://support.apple.com/en-us/HT203350
    Regards,
    Allen

  • I just upgraded to the latest version of iTunes and can no longer sync

    Worked fine before upgraded of iTunesto the latest version now cannot sync iPod touch. error message is that will be wiped and replaced by library which is too big for the device so I have to wipe it and reinstall  manually which takes at least four hours. Cannot backup as not able to in iTunes and do not haveiCloud. Use win7

    Again:
    You said: " Cannot backup as not able to in iTunes" What happens when you try to backup?
    What are you doing when you get this message: "I have followed the solution but am not given the choice to select the device."?
    What do you mean by: "The dates and times on both match."?
    You are not telling use what you are doing and what happens when you do it.

  • Just upgraded to the latest version of iPhoto and now it won't launch without crashing

    Just loaded the latest verion of iPhoto and now it will not launch without crashing

    Try trash the 3ivx folder from
    HD/Library/Application Support
    Regards
    TD

Maybe you are looking for

  • Does anyone know anything about Tomcat security policy?

    I already searched the forum, but no help:( Any expert out there that can help me a little on Catalina.policy file? Thanks Please see this thread: http://forum.java.sun.com/thread.jsp?forum=33&thread=510173

  • Printing 4x6 in PSE

    When I try to print out 4x6 pictures in PSE, the size is all messed up.  I've tried adjusting every setting I can think of, and nothing has worked.  Can anyone give me any pointers on what the setting should be if I want to print a borderless 4x6 ont

  • Can't access music in nano- loaded into 'other'

    Hi, I got a 5th gen nano, when I plugged it in it said it was synching and all my songs show up under the nano tab in itunes but no songs showed on the nano. The songs were all in grey so I changed it to the manual load songs setting as suggested in

  • No columns in table ERROR

    I have a simple query with a join between 2 tables. (something like this) select db2admin.invoice.product_num, db2admin.product.description, db2admin.invoice.amount from db2admin.invoice, db2admin.product where db2admin.invoice.product_num = db2admin

  • Colours look faded/dull in PDF

    Hi everyone, I have created several PDF files (Acrobat 6.0 Professional) from Word 2003 documents. In some of them colours used in headlines (blue, red, yellow, green) look dull, even ugly while in other PDFs they look just like in original Word file