Justify all lines option questions?

I want to create an Area Type box and have all of the text line up on both the left and right sides, so I use the Justify all Lines option.
1. After doing this, is there a way to adjust the spacing of the headline? I tried adjusting the tracking, though that didn't work. Is the only way to use a separate Area Type or Point Type for the headline so it is not affected by the Justify all Lines option?
2. Is there another way to acheive what I want?
Thanks.

You should get into this:
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-63aba .html#WS2067CA8F-41BB-42f7-8E1B-A74EEC5BD625
For headlines you can use:
Type > Fit headline

Similar Messages

Can't "Justify all lines" in CS5

Hello,
I'm trying to use the option of justifying all the lines in a textbox, but all I can do it justify to the right, center and left. It doesn't work when I'm trying to justify all lines. How can I solve this problem?
Thanks
Tom

Just to be sure, you drew a box (either with the Text tool or the Rectangle tool) and then entered or pasted some multi-line text in it.

Iam not able to use all the options in my ichat and neither is my sister can anyone help us were both new to macbooks??

both me and my sister do not have all the options available to us on ichat and we both want to use the video chat help please were both new to the mac worlds. thanks!

Hi,
iChat 6 ?
I have seen one post that suggests the the Connection Doctor (VIdeo Menu) says in the capabilities tab that the AIR will not do Multiway Video or Audio chats.
I am not sure how true this is as iChat 4 and 5 can.
Much earlier Mac computers such as G4 signle Processors do have this issue. I would not have expected it with an Intel Processor.
File Transfers can be dependent on the Port used being open in your router (As can Video and Audio chats)
Screen Sharing requires that you use UPnP to open ports in the router (As well as turning it On in the vidoe Menu).
If you could be more precise I could match my answers to your questions.
It is late where I am and it will be about 20 hours before I read any reply.
10:28 PM Thursday; August 25, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

In iTunes under my device, under the apps tab, Why are all the options shaded out? I cannot make any changes, select any apps or do anything with the apps. I was able to load a few apps and sync but cannot sync anymore to my phone.

In iTunes under my device, under the apps tab, Why are all the options shaded out? I cannot make any changes, select any apps or do anything with the apps. I was able to load a few apps and sync but cannot sync anymore to my phone.

Hi,
( I search for iChat questions when I have finished in the iChat Forum)
So the menu bar reads iChat, File, Edit, View, Buddies, Video, Window and Help
There is no Buddy List open.
There is no other window for iChat open.
In the iChat Menu you only have access to Status.
Is an item ticked in the list ?
Is this a green (Available item) or Red ( an Away one) ?
Can you access the Accounts option ? (Sitll in the iChat Menu)
Is anything in here ticked ?
In the Window menu any Logged in account should appear in the list (Between the Next Chat and File Transfer items)
It would be useful to know which version of iChat this is.
If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option (you can use it in earlier OS versions if you want)
Type in:-
~/Library/Preferences
Find the file called com.apple.ichat.plist
Drag it to the Trash and Restart iChat.
This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
9:23 PM Saturday; August 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

SQL Server 2008 Express Installation with command line options , FAILED.

HI,
I Have SQL Server 2005 Express instances on my PC. Now i am trying to install 2008 Express edition with Advance Services(Reporting.)
I am trying to install the SQL Server 2008 Express with command line Options.
/qs /Action=Install /Hideconsole /SecurityMode=SQL /Features=SQL,Tools,RS /InstanceName=XXXXXX /SAPWD="StrongPassword" /SQLSYSADMINACCOUNTS="Builtin\Administrators" /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM" /RSSVCACCOUNT="NT
AUTHORITY\SYSTEM" /BROWSERSVCSTARTUPTYPE=Automatic /TCPENABLED=1 /NPENABLED=1
But installation exits. It says the previous version 2005 tool are already exists, Remove them to Continue the 2008 Server Installation.
please suggest me how to avoid that check and continue installation by replacing the older tool with 2008 automatically.
regards
Pratap M:)

Have you found any error in event logs?
In my case even after uninstalling all 2005 related components it didn't worked. I had to resort to a brute force way and
remove following registry keys
32 Bit OS: HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\90
64 Bit OS: HKLM\Software\Wow6432Node\Microsoft\Microsoft SQL Server\90
Check below threads
http://stackoverflow.com/questions/175881/sql-server-express-2008-install-side-by-side-w-sql-2005-express-fails
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5fc58507-9f40-4213-acbd-32a57c8822d7/cant-uninstall-sql-server-2005-express-tools?forum=sqlsetupandupgrade
Please click the Mark as answer button and vote as helpful if this reply solves your problem

HP RGS Command Line options not working as expected

I have a HP RGS Receiver v7.1 installed on my desktop which initiates a remote Session to my RHEL based workstation running HP RGS sender deployed in a LAN. Now when launching the HP RGS Receiver it brings up a window asking for the host name or IP Address of the PC to connect to (in this case the RHEL box). When provided the hostname, the next question asked is the username and the password. When all these detials are provided, the connection is successfully established and all works as expected. I am trying to autolaunch the HP RGS Receiver so I can bypass entering the hostname or ipaddress, username and password during each launch. When reading the usermanual, there is clearly a way of doing this by using the HP RGS commandline autolaunch properties. The property Rgreceiver.Session..IsConnectOnStartup should allow me to setup autolaunch while I provide the hostname,username and password int he following properties: Rgreceiver.Session.n.Hostname Rgreceiver.Session.n.Username Rgreceiver.Session.n.Password Rgreceiver.Session.n.PasswordFormat So it is assumed that when I pass these as command line options while launching the HPRGS executable rgreceiver.exe it should all read the values from the command line and directly establish the connection without me having to enter these details. However it does not seem to work I assume that in n we specify the session number = 1 (because we are working with only a single session) The command Rgreceiver.exe -Rgreceiver.Session.1.IsConnectOnStartup=1 -Rgreceiver.Session.1.Hostname="MyHostName" -Rgreceiver.Session.1.Hostname="MyUserName" -Rgreceiver.Session1.Password="mypassword" -Rgreceiver.Session.1.PasswordFormat=Clear does not seem to have any impact. The HPRGS software behaves the same with or without command line and sending in the commandline does not seem to have any impact on the way it launches neither it gives any error. I have tried to above command line through multiple ways (for e.g. using delimetes and without delimiters, using different values for session number and so on) but it seems Rgreceiever does not even recognize that the commands were given in the first place. I have run out of all options. Any help will be appreciated.

I'm not sure why the command line parameters are not working, but you might want to try to put these same settings into an xxxxx.rgreceiver file. When you double-click the .rgreceiver file, the RGS Receiver will launch with the settings contained in the file. It's worth a try to see if works better for you. (This is described in the RGS User Guide in a section called "Auto-launching connections.") --Keith

Can't install AMD driver properly lost all CCC options and 3D

Hi everyone,
I have HP pavilion g6 , win 7 64 bit. Amd Radeon HD 7400M series and Intel HD graphics.
My problem started when my screen was getting black for seconds alot and when it comes back it said amd stopped so I decided to update the driver.
First I downloaded the supported driver from the site
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98607-2&cc=emea_middle_east...
but every time I try installing it the install process run very quickly the screen doesn't even switch during installtion and it says driver is successfully installed although nothing was installed and nothing absolutely change.
so I decided to download the latest amd driver from amd site14.4. I had some problems while installing but it worked fine and I had all the options including the switchable graphics. But after a while the laptop started to hang on startup showing a blue screen saying something was incompatible.
So I tried to update the driver from device manager and since then I lost all catalyst control center options also the switchable graphics mode and 3D in photoshop isn't working anymore and every time I close the catalyst a message come saying it stopped working. I tried many times to uninstall the driver then installing a new versin 14.9, the prvious 14.4, the supported but still nothing of them worked at all, also I tried installing with win 7 compatibility but it always gets stuck. Sorry for elongation but I'm so tired of this problem. I really appreciate any help.
This question was solved.
View Solution.

Hi @Black_violet ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue HP Pavilion g6-1045sx Notebook and issues with graphic software. Here is the drivers for your device. I would uninstall both and restart the computer, then reinstall only the AMD. It will include the Amd Graphics Driver and Catalyst Control Center restart the computer.
The Intel will automatically install.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Need a JavaScript to enable/view Multi-line option for Text fields.

Hello All,
I need a JavaScript to enable/view Multi-line option for all the Text fields in PDF Form.
Assume that I have a PDF form of Fields from F1 to F100 and it contains 25 Checkboxes, 25 Combo Box and 50 Text Fields. Now i need a javascript for which i need to enable Multiline for only Text Fields. So Is there any JS for which i can enable the Multiline option for only Text fields and not for ComboBox or Checkbox.

Hi timo,
Thanks for your help. iam trying to use the iteraor approch to do this. but i don't know how to fetch the data entered in the form that was built by the iterator. can you please tell me .
thanks

Restrict system from doing re-confirmation of all line items in SO

Hello SDNs,
When we change the quantity of one line item, system is going for re-confirmation of all line items.
when there are multiple line items, it is having perfomance problem. Now we want to change this to go for re-confirmation of only the changed line item. Please suggest me how to move ahead.
Regards
Hari

Hi,
what you are willing to implement is not a supported functionality in the current Yard management.
If this is not yet the case, I would encourage you to open a SAP Customer message so that your question gets checked and analysed at development support.
BR
Alain

Payment Term to appear compulsorily in all line items

Hi All,
There is a requirement from the client that payment term should appear compulsorily in all line
items in FBL5N.
To make the above possible one solution proposed is that to make payment term as a required
entry in field status group of customer GL reconciliation account , and make payment term optional in Field status of the following posting keys which is now suppressed
05- Outgoing Payment
07- Other Clearing
15- Incoming payment
17- Other clearing
18- Payment Clearing
Are there any drawback if we go ahead with the above configuration, or is there any better solution. Please get back immediately as its an urgent requirement.
Regards
Milind Nair

hello,
Isnt there anyone who can provide a solution.
Regards
Milind Nair

What is Tcode for single delivery for all line items in PO

Hi all,
Sorry if it is a simple question, But I am from SD module. What is Tcode to create a single delivery documents for all line items in PO. I have 3 line items with Different materials having diffent quantities and there are different delivery dates and different delivery schedule dates. I need to create single delivery. Could you please tell me how to do it? What is the Tcode?
Thanks
Anil

Hi,
Inbound delivery T.code :VL31N,
Regards,
JS

Tcode to create single delivery document for all line items in PO

Hi all,
Sorry if it is a simple question, But I am from SD module. What is Tcode to create a single delivery documents for all line items in PO. I have 3 line items with Different materials having diffent quantities and there are different delivery dates and different delivery schedule dates. I need to create single delivery. Could you please tell me how to do it? What is the Tcode?
Thanks
Anil

Hi,
Inbound delivery T.code VL31N.
Regards,
JS

Command line option to specify Bridge master cache

Please allow a bridge command line option to allow the user to select a specific bridge master cache.
The motivation is as follows: I have written a c++ programme to key-word all of my many thousands of photo projects. Essentially each project is in a separate directory on 8 terabytes of networked disk. Associated with each directory is a set of key words. When the appropriate project is selected, I invoke Bridge to open that directory, possibly with a specific images as the "starting image" for that project. Since the master cache files are split (to accomodate the 500,000 max image count supported by bridge), it would be excellent if I can pass a reference to the specific master cache associated with that directory.
A second value of this option would allow the user to create desk-top short-cuts to invoke bridge using an appropriate cache structure. For example, the properties of one short cut could specify the cache file for the current daily use of the Bridge to process images in progress. A second could point the the cache associated with the historical first 400,000 image archived on the network, and a third could invoke bridge pointing to the cache for the next 400,000 image cache - or whatever grouping the user needs to match his workflow when using Bridge as the central focus for various digital assets..
This type of processing allows the user to conveniently invoke bridge according the the needed work flow when multiple cache systems are required. In addition, the multiple desk-top shortcuts would minimize the "error" of having bridge pointed, by accident/neglect, to the incorrect cache structure.
It would also be valuable to allow the user to display the current number of actual image items in a cache system - either as a "view" or "tools" option. This would allow the user to know when it is time to start a new master cache system. Of course, this can be intependently viewed in windows explorer by the count of files in the 1024 or 256 directories - however maybe the cache structure already "knows" this number instantly. Other statistics could be interesting as well - possibly the number of directories known to the cache (possibly the same as the count of directories within the 1024 or 256 directories). Possibly the number of files cached by file type (jpg, tif, psd, cr2, nef, etc) would be of interest to some folks - however, such things should be user-selectable since such analysis might be time intensive and maybe of no interest.
Of course, I do not know if this is consistent with other uses of Bridge - this request is made based upon my use of Bridge as a still photographer and a few videos I have created.
thank you....
tony

I'm going to be technical for a minute, just for the Forum archives...
The Library file location is stored in your "iTunes Prefs.xml" file in<pre>%APPDATA%Apple ComputeriTunes</pre>.
Actually, I should say that if you are using a non-default location, there is a key for "iTunes Library Location:1", e.g.:
<key>iTunes Library Location:1</key>
<data>
QwA6AFwARABvAGMAdQBtAGUAbgB0AHMAIABhAG4AZAAgAFMAZQB0AHQAaQBu
AGcAcwBcAFQAZQByAGkAZABvAG4AXABNAHkAIABEAG8AYwB1AG0AZQBuAHQA
cwBcAE0AeQAgAE0AdQBzAGkAYwBcAHQAZQBzAHQAbABpAGIAcgBhAHIAeQA=
</data>
The "data" is a base64-encoded UTF16-LE string that is the folder containing the "iTunes Library.itl" file and "Album Artwork" folder. In the above case:<pre>C:Documents and SettingsTeridonMy DocumentsMy Music estlibrary</pre>
The key/data pair does not exist if you're using the default Library location.
Similary, there is a key/value pair for "iTunes Library XML Location:1" -- except this part always appears, even if you are using the default location. Also, it is the full path to the file itself, not just the directory containing it. e.g.:<pre>C:Documents and SettingsTeridonMy DocumentsMy Music estlibraryiTunes Library.xml</pre>
Since it doesn't appear that double-clicking on the Library file you want to open works, I'm guessing the only way to swap locations is to edit the preferences file -- either directly, or with a script/program. I could probably write such a program in a 1/2 hour or so... I might just do that right now.

All Photos option not working

I imported my aperture library of about 200GB. The problem is not that the photos are not in the new library, but I must know when they were taken in order to find them. So for instance, I'm looking through the photos for a specific photo but can't find it. I find some photos from around this date, but some are missing. It appears as though just part of the Photo Stream is present in the "All Photos" viewing option (which of course is definitionally not "ALL"). I searched for the exact date when I took the picture and a Photostream Album popped up with photos I was searching for, but this is highly problematic. What if I hadn't know the dates, etc.
Anyway, I have no idea how to make "All" my photos open in the "All Photos" option.
Best,
Shannon

Hi Wendy,
Here are the steps I have used:
1. On default view added a rich text box.
2. Created another view called Print and mapped it to the same Field which I added to default view
3. Set the Wrap text and Expand to show all text on both the Rich Text Box Properties - in default view and in Print
view. Also set the height of the rich text box to auto.
4. Set the print views as the print view for default view
5. Deployed the form to SharePoint Form Library
6. Opened the form in browser
7. Entered the content in the rich text box in default view. It expands well if I have much content
8. Clicked on Print preview and that opens up the print preview and it shows the rich text box only one line in height and with scroll bar
I missed to mention that it is a web browser enabled form and I am using InfoPath 2013 and SP 2013.
It does work fine in InfoPath client.
Thanks.

What is Tcode to create a single delivery documents for all line itemsinPO?

Hi all,
Sorry if it is a simple question, But I am from SD module. What is Tcode to create a single delivery documents for all line items in PO. I have 3 line items with Different materials having diffent quantities and there are different delivery dates and different delivery schedule dates. I need to create single delivery. Could you please tell me how to do it? What is the Tcode?
Thanks
Anil

Hi Anil
For your 1st question , if the delivery date is same but he material and quantity are different also then both can be delivered . So you can combine those two materials into 1 delivery . what you said is true
For your 2nd question , you said you have two line items in PO , but if you want combine them into 1 delivery document , then first of all as they are two different materials you cant combine , but if you have a 3 PO's for the one material only then you can combine into one delivery by using VL10A
Regards
Srinath

Justify all lines option questions?

Similar Messages

Maybe you are looking for