"Justify last left" in the Paragraph dialog box, grayed out?

Had do you activate the "Justify last left" in the Paragraph dialog box in PS CS6? It grayed out.

These four options that you've highlighted are available for Paragraph Type and not Point Type. Create Paragraph Type by dragging a marquee with the Type Tool to make a box to contain the type instead of just clicking on the canvas.

Similar Messages

  • Disable the top left corner pushbutton in dialog box

    Hi
    How can I deactivate or disable the top left corner pushbutton in dialog box?
    Kindly reply.
    Thanks and Regards.

    Hi,
    When you set the pf-status, write it like
    SET PF-STATUS '0100' EXCLUDING <function code of pushbutton>.
    Hope this helps you.
    Regards,
    Manoj Kumar P

  • Can you evenly distribute tabs in the Tabs dialog box?

    Hello.
    I work with lots of statistics arranged in columns and separated by tabs in text boxes. The number of columns will vary, but the text box is always the same width. I manually space out the tabs to evenly fill the text box. This is slow. I wonder if there is any way to select all tabs and then evenly distribute them across the Tabs dialog box? Like how you can evenly distribute multiple elements using the Align tool.
    The 'Repeat Tab' function is close to what I need, but an 'Evenly Distribute Selected Tabs' would be even better.
    Thanks,
    /stephen

    Scripts are easy, and very powerful, and you don't need any programming knowledge to use them. Just install them (see How to install scripts in InDesign | InDesignSecrets) and double-click the name inthe scripts panel to run them.
    You don't have to use the ESTK as suggested above, a plain text editor like Notepad or Text edit is fine (be sure to save as plain text, but add the .jsx extension). Since these scripts are very old, there's a chance they won't work in newer versions, but that can usually be overcome by making a subfolder in the scripts folder with the correct version name and placing an older script into the subfolder. In the case of the second script that would be a folder named "Version 4.0 Scripts" (without the quotes, but case-sensitive). I have no idea waht version Gerald's script was written for, but I've removed the <br \> codes and replaced them with the correct line breaks below if you want to try it:
    if (app.documents.length != 0){
         if (app.selection.length == 1){
              var a = app.selection[0].constructor.name;
              switch (app.selection[0].constructor.name){
                  case "Text":
                   case "InsertionPoint":
                   case "Character":
                   case "Word":
                   case "Line":
                   case "TextStyleRange":
                   case "Paragraph":
                   case "TextColumn":
                   case "Story":
                        main();
                        break;
                   default:
                        alert("No text selected.");
                        break;
         else{
              alert("Nothing selected.");
    else{
         alert("No document opened.");
    function main() {
         var allSel = app.selection;
         var nPara = allSel[0].paragraphs.length;
         var allPara = allSel[0].paragraphs;
         for (var m=0; m < allPara.length; m++) {
              var aSel = allPara[m];
              var myTabList = aSel.tabStops;
              var lastX = myTabList[-1].position;
             var myStep = myWidth / myTabList.length;
              for (var n=(myTabList.length-1); n >= 0; n--) {
                   myTabList[n].position =  myWidth+n;
              for (var n = 0; n<myTabList.length;  n++) {
                  myTabList[n].position = (n+1) * myStep;

  • MS Word: This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box.

    This is not a question. I believe I've found a new issue and the fix for it.
    The situation:
    A brand new iMac 27" running Yosemite 10.10.1
    MacMini server running 10.8.5 server.
    The issue:
    Client on iMac trying to work on MS Word documents stored on server was requiring him to save the documents to his desktop and then copy them back to the folder on the server. The exact error message was, "This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box."
    The issue is unique to this computer in an office of 10 client computers and three servers.
    Attempted fixes:
    Verified that the ".Temporaryitems" folder existed and the permissions were set properly.
    Repaired permissions on the client and the network share.
    Definitive fix:
    By default, Yosemite 10.10.1 uses SMB for connecting file shares. When I overrode the default and switched to AFP protocol, the issue went away.
    I hope this helps someone else.
    Rob

    That was it. What an operating system. It is very helpful to view files you are looking for. But if you have preview on you cannot save files.

  • How to modify the "To Print" Steps in the Print the Report Dialog box

    From the Crystal Reports Viewer Toolbar, when selecting the Print option,
    a 'Print the Report' Dialog box opens. Is it possible to modify the 'To Print' steps?
    We tried modifying  (commenting-out the To Print steps) in strings_en.js and export.js, but
    when running, the changes do not show up.
    We are using Crystal Reports for Visual Studio 2008, Crystal Reports Viewer Version=10.5.3700.0
    Thank you.

    A warning 1st. Modifying the export.js file is not supported and may lead to all kinds of issues. Also, as soon as somebody else installs an app on that machine, the js files will get overwritten and thus removing your changes.
    Second, I do not think the print dialog is defined in a JS file. In CR 10 I think we built our own print dialog and there is no control over it (e.g.; no exposed APIs).
    I think your best bet will be to create a printer dialog as per your requirements and  launch it from your our own print button.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Current View option in  the Print dialog box

    I have a PDF file, approximately 55 pages that is comrpised of 50+ .jpg images that were combined into a single PDF file. The images are various size screenshots from Facebook.
    I need to be able to print the entire file at 75% magnification in order for every page to be readable.  Only way in Adobe’s print dialog box that I can find to do so is select one page at a time, select “Current View” and then print. 
    When "All" is selected under Print Range in the Print Dialog box, the pages print at different magnifications, most below 10% and unreadable.
    Is there a way to get the entire document to print in the “Current View” setting or at a specified magnification?
    I’m using Adobe Acrobat 9 Pro.
    Any help would be greatly appreciated.
    Thanks

    duh...
    Figured out I had to tweak it in the "copies and Pages"

  • I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

    I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

    There may be some security issues related to the USPS PDFs.
    http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
    I can't help with the scan/print problem. You seem to have done everything I would try.
    I don't know if maybe using a registry cleaner would help.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Can't see printer name in the print dialog box as the printer name is too long

    This is actually causing siginificant pain as I am using a tablet and moving around a number of floors/buildings needing to be able to print from where I am.
    When printing from Acrobat reader, the print dialog box that comes up does not have a horizontal scroll bar and does not fit in the names of the printers in my organisation. We are unable to change the printer name, so it basically means that when using Acrobat, we can't select a printer.
    All other windows applications show more characters and also have a horizontal scroll bar in the print dialog box so you can scroll across to see the rest of a long printer name. Why is acrobat not using the standard windows print dialog?
    Has anyone come across this? Help!

    This is the Acrobat forum, not the Reader forum. In the future you should check there. I am not sure why you can not change the printer name, unless you do not have administrator rights. The name of the printer has nothing to do with where the print copy is sent. It is just for the purpose you mentioned of identifying the printer to print to. If you are not the administrator, ask your IT folks to change the name for you and explain why.

  • Modifying the name of the file in the download dialog box

    Hi all!
    I've a javascript page that make a pdf document in the fly and download that document. Everything is fine, but I'd like to know how can I modifying the file name in the download dialog box, i.e., when the page display:
    "You are downloading the file:
    xpto.jsp from ..."
    I want to substitute the "xpto.jsp" by "file.pdf".
    I've already theses lines:
    response.setContentType("Application/pdf");
    response.setHeader("Content-Disposition", "attachment; filename="+ nameFile+";");
    response.setHeader("Content-Length", ""+stp.length);
    but the problem persist.
    Note that in the second window, the Save As window, everything is fine, the nameFile appears in the file name box. The problem it's only in the first window, the File Download window.
    Thanks for any help,
    A. Santos

    I've discover something. When the File Download window it's displayed with the following text:
    "You are downloading the file:
    xpto.jsp from localhost
    Would you like to open the file or save it in your computer?
    button OPEN button SAVE button CANCEL button MORE INFO"
    if I press the OPEN button then another File Download window opens with the rigth text:
    "You are downloading the file:
    file.pdf from..."!!!
    i.e, the text desired!
    So the first window is unnecessary and undesired!
    How can I remove this first File Download window??
    Please help!
    A. Santos

  • MAC OSX 10.9.5: What is this strange file format in the Open Dialog box?

    Hello all.
    I'd never really noticed this, but I saw a rather unusual file format in the Open dialog box and was wondering why it appeared as it did. It appears as follows from the file/open dialog box:
    To be completely transparent, I'd originally posted this image on my twitter feed to @illustrator. Since then I have been in communication with Scott but the advice has been to reinstall Illustrator. If this had happened on one machine, I'd be inclined to agree that this may do something, but since discovering this unusual format, i've since seen it on six macs running OS 10.9.5 and illustrator version 18.1.0 OR 18.1.1
    Can anyone else confirm that they see the same thing; or if there is a difference, what this format is meant to actually be. I suspect this is a bug but need confirmation by other users.
    Colin

    The error occurs on all machines I have tested. 5 of the machines have the suitcase fusion auto-activation plug-in, but one had no plug-ins at all. All software was installed literally "out of the box" from the creative cloud.
    UPDATE - tested 3 more machines in the office all running 18.1.1 on OSX 10.9.5 and they ALL do the same thing, all installed with the suitcase fusion auto-activation plug-in, but otherwise installed "out of the box" from creative cloud.
    Colin

  • How to suppress the Print Dialog Box?

    Running an (ASP.NET /Crystal Reports 2008) application and using CrystalReportViewer control. Is there way to suppress the print dialog box when I click the print icon on the report tool bar?
    Edited by: juRamz on Aug 26, 2009 2:54 PM

    Hello,
    Sort of, CR needs the info. Only option is to create your own print button that has all the info filled in. It's a Windows Framework Common dialog box that CR calls so it's the OS that is prompting for the info.
    Using ReportClientDoc here's a possible solution, note that this too has a dialog box to select the printer:
    private void button1_Click(object sender, System.EventArgs e) // Print To Printer button
        System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();               
        PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
        CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
        //CrystalDecisions.CrystalReports.Engine.PrintOptions newOpts = new PrintOptionsClass();
        pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
        rasPROpts.PrinterName = cboCurrentPrinters.Text;
        rasPROpts.PaperSize = (CrPaperSizeEnum)
            pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
        rasPROpts.PaperSource = (CrPaperSourceEnum)
            pDoc.PrinterSettings.PaperSources[cboDefaultPaperTrays.SelectedIndex].Kind;
        // new API added to allow changing printing options
        newOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions();
        newOpts.DissociatePageSizeAndPrinterPaperSize = true;
        rptClientDoc.PrintOutputController.ModifyPageMargins(0, 0, 0, 0);
        rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
        MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
    Thank you
    Don

  • PUT BACK THE MISSING THE SCREEN FUNCTION IN THE PRINT DIALOG BOX!!!!

    Hello all...
    I am a creative director in the screen print (garment industry) for over 20 years.  We have always used PS to directly print and control our halftone screens and angles through the screen function in the print dialog box.  Now it has miraculously disappeared after so many versions previous.
    I emplore Adobe and their team to please update this function back into CS5.
    Although it is a function many might not even understand how to use, it is IMPERATIVE to the screen printer/artist in this industry.
    There are workarounds, of course, but they are much more tedious and time consuming.
    I truly cannot convince enough that we folks in this industry want this function back!!!!!

    You might want to also post in these Fora:
    Photoshop Feature Requests
    http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop

  • Problem using the File Dialog Box in a Client/Server application

    I am developping a client-server application using Labview 5.1 . The application on the server acquires data from some instruments and saves it on file, while the application on the clients displayes such acquired data. For doing this I call some routines on the server via the "Open Application vi" (remote connection). All goes well except when I open on the server the "File Dialog Box vi" : in this case the application on the clients is blocked (is blocked the execution of the called vi on the server). Only when
    the File Dialog Box on the server is closed, the execution of the called vi on the server starts again.
    I need to use the File Dialog Box on the server, but I don' t want to stop at the same time
    the clients !!
    I need help for resolving such problem.
    Many thanks in advance !!!

    Hi!
    waldemar.hersacher wrote:
    "It seems that the VIs called by the clients are running in the user interface thread.
    A call to the file dialog box will call a modal system dialog. So LV can't go on executing VIs in the user interface thread."
    Are you sure? I think, that File Dialog, called by LabVIEW File Dialog from Advanced File Functions Palette doesn't blocking any cycles in subVI, which running in UI Thread. Look in my old example (that was prepared for other topic, but may be good for this topic too).
    2 linus:
    I think, you must a little bit reorganize you application for to do this. You must put your File Dialog into separated cycle. This cycle, of course, will be blocked when File Dialog appear on the screen. But other cy
    cle, which responsible for visualization will run continuosly at the same time...
    Attachments:
    no_block_with_file_open_dialog.zip ‏42 KB

  • Project deleted in iPhoto 11 ver. 9.1.1 After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i

    Project deleted in iPhoto 11 ver. 9.1.1
    After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i didn't read, dummy) by pressing the delete button. The whole project was gone, the undo menu was grayed out and there was nothing in the iPhoto trash about my Book.
    Surly I can find this if I knew the path to find the project in a library on a back column I have of my hard drive.. Could anyone help me?

    Sorry I'm having a hard time getting this.
    If I go to my hard drive BIGMAC>Library>Application Support>iPhoto>the only thing in this folder is Themes.
    However, when I "Get Info" it's 580MB for 24,421 items. iPhoto says I have 35,977 photos. I would think the database would be into the GB for this many photos.
    If I go to BIGMAC>system>Library>I find nothing about iPhoto
    Is the iPhoto file in the Application Support the one I need to replace with my backup?
    Thanks so much for your help.
    Jack

  • Can't see psd thumbnails in the open dialog box.

    In the open dialog box, the thumbnails for psd files do not show the picture but show an Elements logo instead.  How can I see picture thumbnails for psd files as I do for jpg files?  I found a dng codec on the web site but not a psd codec.  The dng codec doesn't work for psd files.

    Hi,
    Is there any error message when you try to map network Drive manually? It would be better to provide more details about error message.
    Generally speaking, this problem can be caused by Network Connection problem, please make sure your Client PC could access to Network Drive PC.
    In addition, please check Network Drive PC security setting, if there is any firewall policy prevent this operation.
    If still no use, please check Event Viewer if it identify this problem.
    Roger Lu
    TechNet Community Support
    There is no error.  There is no connectivity problem.  THe drives map automatically and always have.  I can open up File Explorer and browse these drives all I want.  I can open up Word and browse to these drives just fine.
    However, when I open certain programs, and click File | Open, the mapped network drives just simply aren't there.  I only see C and D and that's it.

Maybe you are looking for