Justify left and right margins of text

Is there any way to justify both left and right margins of text in the P Pro CS5.5 titler?
TIA

Colin,
That is correct. I would guess that it was added about PS ver. 4.0, when Text went from Raster to Vector, while working in the Image. The Paragraph Palette controls Justification.
Jay,
Thanks for the Feature Request. While I seldom alter Justification in Titler, there are some other aspects from PS (and AI and InDesign), that would be useful, such as full Alignment. I keep requesting that, plus some others (Spell Check would be nice, but even PS does not offer that... ), but so far, Adobe has either not been able to adapt Titler, or there have just been too few requests. As Adobe has added concentration on PrPro, it might well be that more requested features will begin showing up. Here's hoping.
Good luck,
Hunt
PS - for major Title work, I usually just go to AI, and then PS (or maybe only PS) to create them as PSD's. Titler is quite good, and so very useful, but when I want/need more, I just fire up another Adobe program.

Similar Messages

Enlarged photos show white borders on left and right margins

Should these white margins be present when viewed in enlarged format? I can't get rid of these left and right margins when printing 4x6 borderless format so I assume it needs to be corrected in iphoto first.

Did you crop your photos?
Most digital cameras use a 3:4 aspect ratio. When you print onto 4X6 paper, you will have bands on the sides of the photos. It's the same thing as watching a "letterboxed" movie on television with the bands at the top and the bottom.

Remove left and right margin when display portlets

What is the best way to remove the left and right margin when display portlets?
I found a file called \portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\myportal\/
MyPortalContentView.cs
But I do not see a place for the left and right margins. What is the correct place to modify these margins? (How about the top and bottom margins too?)
See the green highlight?

That's it yeah, seems to curve upwards at the sides. Dunno whether leaving a heavy book on it might sway it back into position?!
I had the display upgraded when I bought it so presumed it could have been done whilst 'in operation'. Apart from that there's nothing wrong with it really, doubt it's something they would take it back on anyway.

How to adjust the left and right Margin in PDF

Hi,
I've a dashboard ,when i open this dashboard in PDf , left and right margin are not in sink. How to adjust those margins.
Thanks,
Malli

Hi,
there are only two joins available for InfoSet in BI.
For more details about Infoset joins you may refer following SAP documentation or serch at forums.
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm
I hope it will help.
Thanks,
S

Carousel Appearance. How to narrow Left and right margins (ADF 11.1.2)

Hello,
I need help to adjust the appearance of a carousel component.
As you can see in the picture i need more space for the current page of carousel (need to enlarge the current page) and i want to narrow the space marked with a red line (left and right).
Property settings available do not help.
Can anyone have an idea?
[http://i52.tinypic.com/28arlma.png]

Hi,
did you try skinning ?
http://download.oracle.com/docs/cd/E16162_01/web.1112/e16181/af_skin.htm#BAJFEFCJ
The skin tag documentation is here
http://download.oracle.com/docs/cd/E16162_01/apirefs.1112/e17497/toc.htm
Just have a look for what is available for af:carousel (and note the new skin editor)
Frank

How to add left and right margins in Topic?

Hi
I am using RH10, as part of TCS4. I am creating screen layouts by just modifying the existing ones.
I noticed that there is no margin/ space between the topic border and the topic content in it. When I searched for that in mobile.css, I did not find any relevant reference. When I did a Inspect Element on Firefox, it pointed to default.css which I don't find in my Project Setup pod.
How can I modify it? Here is the screenshot of the issue I am referring to:
Please advise.
Sreekanth

Or right click the css, click Edit With > HTML Editor and apply a margin left and margin right to the Body tag. That will affect all the styles in one go.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Split header at the left and right margins

I want to split my header where the book name is by the left margin and chapter title on the right margin. Is this possible?

Hi Jerry: This is my issue. As you can see, I have to tab over and then space over to get it over to the right margin. Seems like quite a silly issue, but I can't figure this one out! Also, in my format toolbar, I can't find the tab that's in your screenshot, nor do I find it when I go to customize toolbar. I'm sure this is an easy fix, and I'm overthinking it.
Thanks for responding.
Eleni

Changing left and right margins

I want to produce a document which will have the pages printed back to back and then bound.
I would like the margins on the inside of the pages to be wider than those on the outside. As I will be printing back to back this means the wider margin will alternate, on the left for p1, on the right for p2 etc.
As far as I can see this is not possible in Pages. Is the only way round this to basically produce two documents one for the odd numbered pages, the other for the even?

Yes it is possible in Pages.
It is called Facing Pages, which has been removed from Pages 5 along with 100 other features, but exists in Pages '08/'09.
Peter

Extending width all the way to left and right?

If you look into the website :
http://mcec.my/
You scroll down and under the sponsor section where you see a pink background, how do you extend the background all the way across the browser screen when the page load?
Because now the left and right side is white and looks weird...
Thanks for any help in advance

The reason that the pink area does not stretch accross the page is because it is constrained by the outer container div.
Your site structure is a typical method of centering a website in the browser. Everything gets placed in a container which is give a width and a left and right margin of auto.
The way to change it is to get that section of the page out of the container. Place it under the rest of the page in it's own container and then add the pink background to that. You might then need to put the content of that section in another div and use the same technique to centre it.
You can see that with the top section of the page, the effect is achieved with a graphic. You could to the same again with a pink graphic and then try to set that in the CSS. However, this won't be easy if the content of your pages changes.
Martin

How to fill up my laptop screen with Firefox horizontally as it currently has a 3" margin on the left and right sides?tly has a

I just purchased a 17.3" screened-laptop using MS Outlook and Explorer 9 Browser. I cannot use Firefox as my default Browser because I cannot get Firefox to fill up my screen.When I open up Firefox, it maintains a large 3" margin on the left and right sides which does not exist when I open up Explorer 9. Increasing the font size only increases the text size vertically but does nothing to decrease the margin size horizontally.

You can use this extension to set a default font size and page zoom on web pages:
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the maste

I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the master, and I cannot get the margins to alternate at print time. The larger margin is always on the left. Can anyone please help me on this, as I have spent hours and lots of ink.

Set up as facing pages with a larger inside margin.

Filter -Different texts in left and right section in user help ( F4 )

Hi Friends,
When I try to filter values in Analyzer, different texts are shown in user help for selectable (left window section) and selected (right window section).
In leftsection texts are shown as defined eg, text short , but sfter selecting the value, on the right section text long is displayed.
Example:
If a characteristic Z_IO1 with key 1234,
text short T1
mid.text T123
text long T123456
Now I try to filter:
selectable value is shown as
1234 T1 (setting key and text short)
and after moving it to the right side with blue arrow it changes to
1234 T123456 (same settings) if text long doesn't exist text mid. is shown.
Did smomeone face this Issue or has any idea? Then let me know, please.
And something different is strange : When I try to restrict in BEx Query Designer, system works as expected,
display in left and right section of filter window don't differ.
Thanks in advance for your input.
Best Regards
Joe

Hi Venkat
Thanks for reply. My problem isn't filter value selection controlled by rea mode, it's just the display of the filter value texts (descriptions) in the F$ window for selected items. For me it seems, that it is not to change, default is set. I.e. the longest text available is displayed (according to property in RSD1) without any dependence on required texts (short, medium, ling), as mentioned in my example.
Regards
Joe

Touchpad left and right clicks don't work on Yoga 2 pro

Hi,
I just bought a a yoga 2 pro. After setting up, I found that the two bottom keys, left and right keys on the trackpad do not work. Double tap also doesn't work. I reinstall the touchpad driver to no avail. Other gestures on the touchpad work fine, single tap registers as left click, two finger scroll also works. Also, when I use a blue tooth mouse, left and right key works fine.
I am not sure if this is a hardware problem as when I swipe on the area of the two bottom keys, they register the movement. Just not click. Anyone can help me?

Hello,
I've had a Yoga2 Pro now for six months or so. Just recently the left click stopped working correctly. What I notice is that when holding down the left click button on the touch pad, and I try to drag a slider (like a volume slider or to drag a selection box or to drag a scroll box on a page, or to highlight text) and it stops holding down the click. Sometimes it works, sometimes it keeps stopping.
Now, the right click is malfunctioning as well. I press right click on something like an image, and nothing happens. I have to right click on something 2-10 times now for it to register that I'm right clicking.
Also, should I be able to tap the touchpad with two fingers and have that be a right click, or am I just reading that I should be able to do that on the screen (which can)?
I have downloaded the drivers for the y2p touchpad and the y2-13 and the generic ones from the synaptics webpage, but before I uninstall my drivers and try to install those, I want to be sure that is the correct and only possible fix. I'm hoping its not a hardware malfunction. I am running Win 8.1.
Thank you.

How to make those shadowed borders left and right of your page?

Hi, Can someone tell me if I am on the right track? Here's what I've done so far. I've specified the background colour in the properties section. I've set up a 3 column table (fixed size) that has small columns left and right and a big one in the middle. For those small columns I've pickwhipped to 2 small gifs with the shadow. Previewed in Safari and everything looks ok.
My question: is this the best way to do this? Or does it need a CSS approach? And if so, how?
Now I want to give the bottom a shadow as well. Do I proceed in the same way? So make a left corner, right corner and a bottom? I'm working with GL CS2.

The best way to slice things up depends on how the page is layed out. If the content area has a fixed width that centers (or doesn't), then might make more sense to have 3 vertically stacked divs with the background and drop shadows, then nest another div in the middle with margins for the actual content. Or, if the content size is completely fluid, the same structure could still work with floating divs (or absolutely positioned relative to a single container?) holding the corner images. Or there's always the old-school tables way of slicing things up (though I'd avoid that).
There's more than one way to do it, and I don't know that any single option is necessarily the "right" way to go... as long as it works and validates?

Globally map Ctrl B and ctrl F to left and right arrow keys, respectively

Does anyone know how I would *globally* map Ctrl + B and ctrl + F to left and right arrow keys, respectively? This keystroke works for some applications, but not all. I'd like it to always work.

So, it is now June and still no fix. This is incredibly annoying when you are giving a professional presentation in front of an audience and the speaker wants to go back a slide. It's enough to change presentation software.
In truth, the Presentation Module in LR5 is vastly inferior to other dedicated software. For instance, you can't add a text slide as a divider between "chapters," as far as I can figure out, you can't merge slideshows or go from one to another without exposing your entire screen, the order of slides is over-ridden by some predetermined metadata rather than being able to choose two catalogs and put them into one slideshow, deciding yourself which catalog should play first.
Are any of these changes in the works?
Any eta on the right/left arrow fix?
This could be SO great. I hope it is moving in that direction.

Justify left and right margins of text

Similar Messages

Maybe you are looking for