Justin, DataGuard

Doesn't DataGuard update the remote DB with Archive logs? If so, won't you lose tranactions that are in the current ReDo logs?
I don't know anything about DataGuard, just what I had to lean for the OCP certification...

Potentially...
There are different modes for DataGuard. In maximum protection mode, redo entries are sent synchronously to the backup server, so you can never lose transactions. In the more common asynchronous modes, the standby database will lag the primary-- part of the failover procss involves applying transactions from the online redo logs. In the vast majority of situations, you won't lose all the multiplexed copies of the online redo logs, so you can just apply the online logs and start using the standby database. If you have a catastrophic faliure (i.e. the primary server is under a foot of water), you can lose transactions.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

  • DataGuard in a Cluster

    The standby and production are on different cluster nodes, but in case of a failure on the same node. I know that is possible to run the production and the standby on the same server using the lock_name_space parameter. Is it possible to use DataGuard in such a cluster without major changes ?

    Posible, sure.
    A good idea? That depends on what you mean by a production database. Normally, you would do the migration on a dev database first, validate that your applications still work properly (and fix the inevitable issues), move to test, etc. You wouldn't normally be doing a migration directly to the production instance.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • DataGuard - multiple standbys on the same server

    DataGuard - multiple standbys on the same server
    I have my primary database on one server and I have 2 physical standby databases on another server. Is it possible to configure it so that the archive logs are pushed to the backup server only once? Can they be written to a single location on the backup server and accessed by both standby databases?

    Justin... Hold on !!! it seems that user is asking for test, not for real scenario.
    Anyways, it could be possible without mentioning undocumented parameters. You just need to enable log_archive_dest_n and log_archive_dest_state_n parameter and configure tnsnames so you can mention service there.
    Pls. check and revert back if I am wrong here.
    Cheers !!!
    Star Nirav
    Personally, I would be suprised if you could get two
    standby databases to run on a single failover machine
    without resorting to some of the unsupported
    parameters that are required to get a primary &
    secondary running on a single machine for development
    purposes. I can't imagine how two standby databases
    could pull archived log files from the same directory
    and apply them at completely different times.
    Generally, you would want your failover system on a
    different machine than the reporting system since
    they serve relatively different purposes.
    Alternately, have you looked at using a logical
    standby to serve both purposes?
    Justin

  • Dataguard concept question (data loss?)

    Hi!
    On the primary side I have:
    - mirrored redo log files
    - archiver creates a archiving file every 30 minutes for example
    - archive file gets transfered to to standby system
    On the standby side (physical or logical) gets updated when it receives an archive file.
    Lets descuss following szenario:
    What happens if my primary systems fails and the current redo file isn't archived yet? Do I have now a data loss or can I somehow recover my standby system with the mirrored redo log file of my primary system?
    Thanks
    Markus

    If you are using one of the less protective DataGuard protection modes, yes, it is possible to have data loss. Since DataGuard is protecting you from disasters, the assumption is that if you lose the primary database server, you've lost all the online redo logs. So in your setup, you'd have 30 minutes of data at risk. If that is unacceptable, you can certainly use a different protection mode. In the maximum protection mode, redo is applied synchronously on the standby.
    Justin
    Edited by: Justin Cave on Jun 18, 2009 5:20 AM
    Or more succinctly: What Hament said

  • Multiple Standby Dataguard Configuration

    Hi,
    Sorry if this has been posted before, but I could not find the answer.
    I have a Primary site (PRIM) and one Standby site(STBY1). The standby receives archive log changes from the primary. Also using dataguard to manage the Standby.
    I would like to create another standby (STBY2) and use the current standby (STBY1) to send changes to the other standby (STBY2).
    I've read the section on Cascade Redo Log Destinations in Section D of the Dataguard doc, but it really doesnt show how this is configured.
    I assume that my standby (STBY1) would need a the log_archive_dest_2 set to the service that points to the second standby (STBY2).
    My question is.. Do I need to be using Maximum Availibilty and send redo logs vice archive logs? How do I configure dataguard? Is the second standby (STBY2) another site in the dataguard configuration?
    Thanks,
    Roland

    I'm curious, is there a reason that you wouldn't want PRIM to supply the changes to both STBY1 and STBY2? In the configuration you're describing, if there was a failure on STBY1, you couldn't fail over from PRIM to STBY2...
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Error in Creation of Dataguard for RAC

    My pfile of RAC looks like:
    RACDB2.__large_pool_size=4194304
    RACDB1.__large_pool_size=4194304
    RACDB2.__shared_pool_size=92274688
    RACDB1.__shared_pool_size=92274688
    RACDB2.__streams_pool_size=0
    RACDB1.__streams_pool_size=0
    *.audit_file_dest='/u01/app/oracle/admin/RACDB/adump'
    *.background_dump_dest='/u01/app/oracle/admin/RACDB/bdump'
    *.cluster_database_instances=2
    *.cluster_database=true
    *.compatible='10.2.0.1.0'
    *.control_files='+DATA/racdb/controlfile/current.260.627905745','+FLASH/racdb/controlfile/current.256.627905753'
    *.core_dump_dest='/u01/app/oracle/admin/RACDB/cdump'
    *.db_block_size=8192
    *.db_create_file_dest='+DATA'
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='+DATA/RACDB','+DATADG/RACDG'
    *.db_name='RACDB'
    *.db_recovery_file_dest='+FLASH'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=RACDBXDB)'
    *.fal_client='RACDB'
    *.fal_server='RACDG'
    RACDB1.instance_number=1
    RACDB2.instance_number=2
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(RACDB,RACDG)'
    *.log_archive_dest_1='LOCATION=+FLASH/RACDB/ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=RACDB'
    *.log_archive_dest_2='SERVICE=RACDG VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=RACDG'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='DEFER'
    *.log_archive_format='%t_%s_%r.arc'
    *.log_file_name_convert='+DATA/RACDB','+DATADG/RACDG'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_listener='LISTENERS_RACDB'
    *.remote_login_passwordfile='exclusive'
    *.service_names='RACDB'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    RACDB2.thread=2
    RACDB1.thread=1
    *.undo_management='AUTO'
    RACDB2.undo_tablespace='UNDOTBS2'
    RACDB1.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='/u01/app/oracle/admin/RACDB/udump'
    My pfile of Dataguard Instance in nomount state looks like:
    RACDG.__db_cache_size=58720256
    RACDG.__java_pool_size=4194304
    RACDG.__large_pool_size=4194304
    RACDG.__shared_pool_size=96468992
    RACDG.__streams_pool_size=0
    *.audit_file_dest='/u01/app/oracle/admin/RACDG/adump'
    *.background_dump_dest='/u01/app/oracle/admin/RACDG/bdump'
    ##*.cluster_database_instances=2
    ##*.cluster_database=true
    *.compatible='10.2.0.1.0'
    ##*.control_files='+DATA/RACDG/controlfile/current.260.627905745','+FLASH/RACDG/controlfile/current.256.627905753'
    *.core_dump_dest='/u01/app/oracle/admin/RACDG/cdump'
    *.db_block_size=8192
    *.db_create_file_dest='+DATADG'
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='+DATADG/RACDG','+DATA/RACDB'
    *.db_name='RACDB'
    *.db_recovery_file_dest='+FLASHDG'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=RACDGXDB)'
    *.FAL_CLIENT='RACDG'
    *.FAL_SERVER='RACDB'
    *.job_queue_processes=10
    *.LOG_ARCHIVE_CONFIG='DG_CONFIG=(RACDB,RACDG)'
    *.log_archive_dest_1='LOCATION=+FLASHDG/RACDG/ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=RACDG'
    *.log_archive_dest_2='SERVICE=RACDB VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=RACDB'
    *.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
    *.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
    *.log_archive_format='%t_%s_%r.arc'
    *.log_file_name_convert='+DATADG/RACDG','+DATA/RACDB'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    ##*.remote_listener='LISTENERS_RACDG'
    *.remote_login_passwordfile='exclusive'
    SERVICE_NAMES='RACDG'
    sga_target=167772160
    standby_file_management='auto'
    undo_management='AUTO'
    undo_tablespace='UNDOTBS1'
    user_dump_dest='/u01/app/oracle/admin/RACDG/udump'
    DB_UNIQUE_NAME=RACDG
    and here is what I am doing on the standby location:
    [oracle@dg01 ~]$ echo $ORACLE_SID
    RACDG
    [oracle@dg01 ~]$ rman
    Recovery Manager: Release 10.2.0.1.0 - Production on Tue Jul 17 21:19:21 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    RMAN> connect auxiliary /
    connected to auxiliary database: RACDG (not mounted)
    RMAN> connect target sys/xxxxxxx@RACDB
    connected to target database: RACDB (DBID=625522512)
    RMAN> duplicate target database for standby;
    Starting Duplicate Db at 2007-07-17 22:27:08
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: sid=156 devtype=DISK
    contents of Memory Script:
    restore clone standby controlfile;
    sql clone 'alter database mount standby database';
    executing Memory Script
    Starting restore at 2007-07-17 22:27:10
    using channel ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: starting datafile backupset restore
    channel ORA_AUX_DISK_1: restoring control file
    channel ORA_AUX_DISK_1: reading from backup piece /software/backup/ctl4.ctl
    channel ORA_AUX_DISK_1: restored backup piece 1
    piece handle=/software/backup/ctl4.ctl tag=TAG20070717T201921
    channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:23
    output filename=+DATADG/racdg/controlfile/current.275.628208075
    output filename=+FLASHDG/racdg/controlfile/backup.268.628208079
    Finished restore at 2007-07-17 22:27:34
    sql statement: alter database mount standby database
    released channel: ORA_AUX_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 07/17/2007 22:27:43
    RMAN-05501: aborting duplication of target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/undotbs2.265.627906771 conflicts with a file used by the target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/example.264.627905917 conflicts with a file used by the target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/users.259.627905395 conflicts with a file used by the target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/sysaux.257.627905385 conflicts with a file used by the target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/undotbs1.258.627905395 conflicts with a file used by the target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/system.256.627905375 conflicts with a file used by the target database
    RMAN>
    Any help to clear this error will be apprecited.......
    Message was edited by:
    Bal
    null

    Hi
    Thanks everybody for helping me on this issue...........
    As suggested, I had taken the parameter log_file_name_convert and db_file_name_convert out of my RAC primary database but still I am getting the same error.
    Any help will be appriciated..............
    SQL> show parameter convert
    NAME TYPE VALUE
    db_file_name_convert string
    log_file_name_convert string
    SQL>
    oracle@dg01<3>:/u01/app/oracle> rman
    Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 18 17:07:49 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    RMAN> connect auxiliary /
    connected to auxiliary database: RACDB (not mounted)
    RMAN> connect target sys/xxx@RACDB
    connected to target database: RACDB (DBID=625522512)
    RMAN> duplicate target database for standby;
    Starting Duplicate Db at 2007-07-18 17:10:53
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: sid=156 devtype=DISK
    contents of Memory Script:
    restore clone standby controlfile;
    sql clone 'alter database mount standby database';
    executing Memory Script
    Starting restore at 2007-07-18 17:10:54
    using channel ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: starting datafile backupset restore
    channel ORA_AUX_DISK_1: restoring control file
    channel ORA_AUX_DISK_1: reading from backup piece /software/backup/ctl5.ctr
    channel ORA_AUX_DISK_1: restored backup piece 1
    piece handle=/software/backup/ctl5.ctr tag=TAG20070718T170529
    channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:33
    output filename=+DATADG/racdg/controlfile/current.275.628208075
    output filename=+FLASHDG/racdg/controlfile/backup.268.628208079
    Finished restore at 2007-07-18 17:11:31
    sql statement: alter database mount standby database
    released channel: ORA_AUX_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 07/18/2007 17:11:43
    RMAN-05501: aborting duplication of target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/undotbs2.265.627906771 conflicts with a file used by the target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/example.264.627905917 conflicts with a file used by the target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/users.259.627905395 conflicts with a file used by the target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/sysaux.257.627905385 conflicts with a file used by the target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/undotbs1.258.627905395 conflicts with a file used by the target database
    RMAN-05001: auxiliary filename +DATA/racdb/datafile/system.256.627905375 conflicts with a file used by the target database                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Unable to resync dataguard

    Hi everybody!
    I have a problem. Some weeks ago I opened a post related to this issue. We have two dataguards with dataguard broker. One of them is resync (thanks to mseberg and this forum) and now I have problems with the other.
    Once I have learned how to configure and start/stop dataguard broker, I have a more basic problem, which is to resync it. I follow a process, where I backup the primary with RMAN, I copy the rman files to the other server with the controlfile, at once, I recover with rman again.
    The problem is that it is too big, 2 hours for backing it up more or less, and when I restore it, no archivelog list appears being syncronized.
    I have followed the same process than the other one and I can't resync it. I think there is something at my params or something new at 11g version...
    SQL> show parameters
    NAME TYPE VALUE
    O7_DICTIONARY_ACCESSIBILITY boolean FALSE
    active_instance_count integer
    aq_tm_processes integer 0
    archive_lag_target integer 0
    asm_diskgroups string
    asm_diskstring string
    asm_power_limit integer 1
    asm_preferred_read_failure_groups string
    audit_file_dest string /opt/oracle/admin/MN122010P/ad
    ump
    audit_sys_operations boolean FALSE
    audit_syslog_level string
    audit_trail string DB
    background_core_dump string partial
    background_dump_dest string /opt/oracle/diag/rdbms/mn12201
    0p/MN122010P/trace
    backup_tape_io_slaves boolean FALSE
    bitmap_merge_area_size integer 1048576
    blank_trimming boolean FALSE
    buffer_pool_keep string
    buffer_pool_recycle string
    cell_offload_compaction string ADAPTIVE
    cell_offload_parameters string
    cell_offload_plan_display string AUTO
    cell_offload_processing boolean TRUE
    cell_partition_large_extents string DEFAULT
    circuits integer
    client_result_cache_lag big integer 3000
    client_result_cache_size big integer 0
    cluster_database boolean FALSE
    cluster_database_instances integer 1
    cluster_interconnects string
    commit_logging string
    commit_point_strength integer 1
    commit_wait string
    commit_write string
    compatible string 11.1.0.0.0
    control_file_record_keep_time integer 7
    control_files string /opt/oracle/oradata/MN122010P/
    controlfile/control01.ctl, /op
    t/oracle/oradata1/MN122010P/co
    ntrolfile/control02.ctl
    control_management_pack_access string DIAGNOSTIC+TUNING
    core_dump_dest string /opt/oracle/diag/rdbms/mn12201
    0p/MN122010P/cdump
    cpu_count integer 4
    create_bitmap_area_size integer 8388608
    create_stored_outlines string
    cursor_sharing string EXACT
    cursor_space_for_time boolean FALSE
    db_16k_cache_size big integer 0
    db_2k_cache_size big integer 0
    db_32k_cache_size big integer 0
    db_4k_cache_size big integer 0
    db_8k_cache_size big integer 0
    db_block_buffers integer 0
    db_block_checking string FALSE
    db_block_checksum string TYPICAL
    db_block_size integer 8192
    db_cache_advice string ON
    db_cache_size big integer 0
    db_create_file_dest string /opt/oracle/oradata
    db_create_online_log_dest_1 string /opt/oracle/oradata
    db_create_online_log_dest_2 string /opt/oracle/oradata1
    db_create_online_log_dest_3 string
    db_create_online_log_dest_4 string
    db_create_online_log_dest_5 string
    db_domain string domain.es
    db_file_multiblock_read_count integer 69
    db_file_name_convert string
    db_files integer 200
    db_flashback_retention_target integer 1440
    db_keep_cache_size big integer 0
    db_lost_write_protect string NONE
    db_name string MN122010
    db_recovery_file_dest string /opt/oracle/oradata/flash_reco
    very_area
    db_recovery_file_dest_size big integer 100G
    db_recycle_cache_size big integer 0
    db_securefile string PERMITTED
    db_ultra_safe string OFF
    db_unique_name string MN122010P
    db_writer_processes integer 1
    dbwr_io_slaves integer 0
    ddl_lock_timeout integer 0
    dg_broker_config_file1 string /opt/oracle/product/db111/dbs/
    dr1MN122010P.dat
    dg_broker_config_file2 string /opt/oracle/product/db111/dbs/
    dr2MN122010P.dat
    dg_broker_start boolean FALSE
    diagnostic_dest string /opt/oracle
    disk_asynch_io boolean TRUE
    dispatchers string (PROTOCOL=TCP) (SERVICE=MN1220
    10PXDB)
    distributed_lock_timeout integer 60
    dml_locks integer 844
    drs_start boolean FALSE
    enable_ddl_logging boolean FALSE
    event string
    fal_client string
    fal_server string
    fast_start_io_target integer 0
    fast_start_mttr_target integer 0
    fast_start_parallel_rollback string LOW
    file_mapping boolean FALSE
    fileio_network_adapters string
    filesystemio_options string none
    fixed_date string
    gc_files_to_locks string
    gcs_server_processes integer 0
    global_context_pool_size string
    global_names boolean FALSE
    global_txn_processes integer 1
    hash_area_size integer 131072
    hi_shared_memory_address integer 0
    hs_autoregister boolean TRUE
    ifile file
    instance_groups string
    instance_name string MN122010P
    instance_number integer 0
    instance_type string RDBMS
    java_jit_enabled boolean TRUE
    java_max_sessionspace_size integer 0
    java_pool_size big integer 0
    java_soft_sessionspace_limit integer 0
    job_queue_processes integer 1000
    large_pool_size big integer 0
    ldap_directory_access string NONE
    ldap_directory_sysauth string no
    license_max_sessions integer 0
    license_max_users integer 0
    license_sessions_warning integer 0
    local_listener string LISTENER_MN122010P
    lock_name_space string
    lock_sga boolean FALSE
    log_archive_config string dg_config=(MN122010P,MN122010R
    ,MN12201R)
    log_archive_dest string
    log_archive_dest_1 string location="USE_DB_RECOVERY_FILE
    _DEST", valid_for=(ALL_LOGFIL
    ES,ALL_ROLES)
    log_archive_dest_10 string
    log_archive_dest_2 string service=MN12201R, LGWR SYNC AF
    FIRM delay=0 OPTIONAL compress
    ion=DISABLE max_failure=0 max_
    connections=1 reopen=300 db_
    unique_name=MN12201R net_timeo
    ut=30 valid_for=(online_logfi
    le,primary_role)
    log_archive_dest_3 string
    log_archive_dest_4 string
    log_archive_dest_5 string
    log_archive_dest_6 string
    log_archive_dest_7 string
    log_archive_dest_8 string
    log_archive_dest_9 string
    log_archive_dest_state_1 string ENABLE
    log_archive_dest_state_10 string enable
    log_archive_dest_state_2 string ENABLE
    log_archive_dest_state_3 string ENABLE
    log_archive_dest_state_4 string enable
    log_archive_dest_state_5 string enable
    log_archive_dest_state_6 string enable
    log_archive_dest_state_7 string enable
    log_archive_dest_state_8 string enable
    log_archive_dest_state_9 string enable
    log_archive_duplex_dest string
    log_archive_format string %t_%s_%r.dbf
    log_archive_local_first boolean TRUE
    log_archive_max_processes integer 4
    log_archive_min_succeed_dest integer 1
    log_archive_start boolean FALSE
    log_archive_trace integer 0
    log_buffer integer 7668736
    log_checkpoint_interval integer 0
    log_checkpoint_timeout integer 1800
    log_checkpoints_to_alert boolean FALSE
    log_file_name_convert string
    max_commit_propagation_delay integer 0
    max_dispatchers integer
    max_dump_file_size string unlimited
    max_enabled_roles integer 150
    max_shared_servers integer
    memory_max_target big integer 512M
    memory_target big integer 512M
    nls_calendar string
    nls_comp string BINARY
    nls_currency string
    nls_date_format string
    nls_date_language string
    nls_dual_currency string
    nls_iso_currency string
    nls_language string AMERICAN
    nls_length_semantics string BYTE
    nls_nchar_conv_excp string FALSE
    nls_numeric_characters string
    nls_sort string
    nls_territory string AMERICA
    nls_time_format string
    nls_time_tz_format string
    nls_timestamp_format string
    nls_timestamp_tz_format string
    object_cache_max_size_percent integer 10
    object_cache_optimal_size integer 102400
    olap_page_pool_size big integer 0
    open_cursors integer 300
    open_links integer 4
    open_links_per_instance integer 4
    optimizer_capture_sql_plan_baselines boolean FALSE
    optimizer_dynamic_sampling integer 2
    optimizer_features_enable string 11.1.0.7
    optimizer_index_caching integer 0
    optimizer_index_cost_adj integer 100
    optimizer_mode string ALL_ROWS
    optimizer_secure_view_merging boolean TRUE
    optimizer_use_invisible_indexes boolean FALSE
    optimizer_use_pending_statistics boolean FALSE
    optimizer_use_sql_plan_baselines boolean TRUE
    os_authent_prefix string ops$
    os_roles boolean FALSE
    parallel_adaptive_multi_user boolean TRUE
    parallel_automatic_tuning boolean FALSE
    parallel_execution_message_size integer 2152
    parallel_instance_group string
    parallel_io_cap_enabled boolean FALSE
    parallel_max_servers integer 40
    parallel_min_percent integer 0
    parallel_min_servers integer 0
    parallel_server boolean FALSE
    parallel_server_instances integer 1
    parallel_threads_per_cpu integer 2
    pga_aggregate_target big integer 0
    plscope_settings string IDENTIFIERS:NONE
    plsql_ccflags string
    plsql_code_type string INTERPRETED
    plsql_debug boolean FALSE
    plsql_native_library_dir string
    plsql_native_library_subdir_count integer 0
    plsql_optimize_level integer 2
    plsql_v2_compatibility boolean FALSE
    plsql_warnings string DISABLE:ALL
    pre_page_sga boolean FALSE
    processes integer 170
    query_rewrite_enabled string TRUE
    query_rewrite_integrity string enforced
    rdbms_server_dn string
    read_only_open_delayed boolean FALSE
    recovery_parallelism integer 0
    recyclebin string on
    redo_transport_user string
    remote_dependencies_mode string TIMESTAMP
    remote_listener string
    remote_login_passwordfile string EXCLUSIVE
    remote_os_authent boolean FALSE
    remote_os_roles boolean FALSE
    replication_dependency_tracking boolean TRUE
    resource_limit boolean FALSE
    resource_manager_cpu_allocation integer 4
    resource_manager_plan string
    result_cache_max_result integer 5
    result_cache_max_size big integer 1312K
    result_cache_mode string MANUAL
    result_cache_remote_expiration integer 0
    resumable_timeout integer 0
    rollback_segments string
    sec_case_sensitive_logon boolean TRUE
    sec_max_failed_login_attempts integer 10
    sec_protocol_error_further_action string CONTINUE
    sec_protocol_error_trace_action string TRACE
    sec_return_server_release_banner boolean FALSE
    serial_reuse string disable
    service_names string MN122010P.domain.es
    session_cached_cursors integer 50
    session_max_open_files integer 10
    sessions integer 192
    sga_max_size big integer 512M
    sga_target big integer 0
    shadow_core_dump string partial
    shared_memory_address integer 0
    shared_pool_reserved_size big integer 10066329
    shared_pool_size big integer 0
    shared_server_sessions integer
    shared_servers integer 1
    skip_unusable_indexes boolean TRUE
    smtp_out_server string
    sort_area_retained_size integer 0
    sort_area_size integer 65536
    spfile string /opt/oracle/product/db111/dbs/
    spfileMN122010P.ora
    sql92_security boolean FALSE
    sql_trace boolean FALSE
    sql_version string NATIVE
    sqltune_category string DEFAULT
    standby_archive_dest string ?/dbs/arch
    standby_file_management string AUTO
    star_transformation_enabled string FALSE
    statistics_level string TYPICAL
    streams_pool_size big integer 0
    tape_asynch_io boolean TRUE
    thread integer 0
    timed_os_statistics integer 0
    timed_statistics boolean TRUE
    trace_enabled boolean TRUE
    tracefile_identifier string
    transactions integer 211
    transactions_per_rollback_segment integer 5
    undo_management string AUTO
    undo_retention integer 900
    undo_tablespace string UNDOTBS1
    use_indirect_data_buffers boolean FALSE
    user_dump_dest string /opt/oracle/diag/rdbms/mn12201
    0p/MN122010P/trace
    utl_file_dir string
    workarea_size_policy string AUTO
    xml_db_events string enable
    I have tested the connectivity between them and it's ok, I recreated the password file
    [oracle@servername01 MN122010P]$ sqlplus "sys/[email protected] as sysdba"
    SQL> select * from v$instance;
    INSTANCE_NUMBER INSTANCE_NAME
    HOST_NAME
    VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
    LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
    1 MN122010P
    servername01
    11.1.0.7.0 09-OCT-11 OPEN NO 1 STARTED
    ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
    [oracle@servername01 MN122010P]$ sqlplus "sys/[email protected] as sysdba"
    SQL> select * from v$instance;
    INSTANCE_NUMBER INSTANCE_NAME
    HOST_NAME
    VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
    LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
    1 MN12201R
    servername02
    11.1.0.7.0 28-NOV-11 MOUNTED NO 1 STARTED
    ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
    Recovery Manager: Release 11.1.0.7.0 - Production on Thu Dec 1 10:16:23 2011
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    RMAN> connect target /
    connected to target database: MN122010 (DBID=2440111267)
    RMAN> run{
    ALLOCATE CHANNEL d1 DEVICE TYPE DISK FORMAT '/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_%d_t%t_s%s_p%p';
    BACKUP DATABASE PLUS ARCHIVELOG;
    2> 3> 4>
    using target database control file instead of recovery catalog
    allocated channel: d1
    channel d1: SID=140 device type=DISK
    Starting backup at 01-DEC-11
    current log archived
    channel d1: starting archived log backup set
    channel d1: specifying archived log(s) in backup set
    input archived log thread=1 sequence=4117 RECID=7260 STAMP=766935608
    input archived log thread=1 sequence=4118 RECID=7261 STAMP=766935619
    input archived log thread=1 sequence=4119 RECID=7262 STAMP=766935630
    input archived log thread=1 sequence=4120 RECID=7263 STAMP=766935635
    ....List of archives....
    Starting backup at 01-DEC-11
    channel d1: starting full datafile backup set
    channel d1: specifying datafile(s) in backup set
    input datafile file number=00010 name=/opt/oracle/oradata/MN122010P/TBCESPANDM_01.DBF
    input datafile file number=00009 name=/opt/oracle/oradata/MN122010P/CESPAROUTING_01.DBF
    input datafile file number=00007 name=/opt/oracle/oradata/MN122010P/TBCESPACALLEJERO_01.DBF
    input datafile file number=00008 name=/opt/oracle/oradata/MN122010P/CESPAGEOCODER_01.DBF
    input datafile file number=00001 name=/opt/oracle/oradata/MN122010P/system01.dbf
    input datafile file number=00002 name=/opt/oracle/oradata/MN122010P/sysaux01.dbf
    input datafile file number=00003 name=/opt/oracle/oradata/MN122010P/undotbs01.dbf
    input datafile file number=00006 name=/opt/oracle/oradata/MN122010P/TBCESPAFONDO_01.DBF
    input datafile file number=00005 name=/opt/oracle/oradata/MN122010P/TBCESPAPOIS_01.DBF
    input datafile file number=00004 name=/opt/oracle/oradata/MN122010P/users01.dbf
    channel d1: starting piece 1 at 01-DEC-11
    channel d1: finished piece 1 at 01-DEC-11
    piece handle=/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_MN122010_t768739341_s768_p1 tag=TAG20111201T104221 comment=NONE
    channel d1: backup set complete, elapsed time: 00:39:26
    Finished backup at 01-DEC-11
    Starting backup at 01-DEC-11
    current log archived
    channel d1: starting archived log backup set
    channel d1: specifying archived log(s) in backup set
    input archived log thread=1 sequence=4256 RECID=7399 STAMP=768741707
    channel d1: starting piece 1 at 01-DEC-11
    channel d1: finished piece 1 at 01-DEC-11
    piece handle=/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_MN122010_t768741708_s769_p1 tag=TAG20111201T112148 comment=NONE
    channel d1: backup set complete, elapsed time: 00:00:01
    Finished backup at 01-DEC-11
    Starting Control File and SPFILE Autobackup at 01-DEC-11
    piece handle=/opt/oracle/product/db111/dbs/c-2440111267-20111201-00 comment=NONE
    Finished Control File and SPFILE Autobackup at 01-DEC-11
    released channel: d1
    I made a alter database create standby controlfile as at Primary and at Standby:
    SQL> shutdown immediate;
    ORA-01109: base de datos sin abrir
    Base de datos desmontada.
    Instancia ORACLE cerrada.
    SQL> startup nomount;
    Instancia ORACLE iniciada.
    Total System Global Area 2937555928 bytes
    Fixed Size 744408 bytes
    Variable Size 1862270976 bytes
    Database Buffers 1073741824 bytes
    Redo Buffers 798720 bytes
    copy the controlfile to standby controlfile locations
    startup standby
    ALTER DATABASE MOUNT STANDBY DATABASE;
    And restoring with rman
    Restoring
    List of Archived Logs in backup set 616
    Thrd Seq Low SCN Low Time Next SCN Next Time
    1 4256 27049296 01-DEC-11 27052551 01-DEC-11
    RMAN> run{
    2> allocate channel c1 type disk format '/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_%d_t%t_s%s_p%p';
    3> restore database;
    4> recover database until sequence 4256 thread 1;
    5> sql 'alter database recover managed standby database disconnect from session';
    6> release channel c1;
    7> }
    allocated channel: c1
    channel c1: SID=164 device type=DISK
    Starting restore at 01-DEC-11
    Starting implicit crosscheck backup at 01-DEC-11
    Crosschecked 115 objects
    Finished implicit crosscheck backup at 01-DEC-11
    Starting implicit crosscheck copy at 01-DEC-11
    Crosschecked 24 objects
    Finished implicit crosscheck copy at 01-DEC-11
    searching for all files in the recovery area
    cataloging files...
    no files cataloged
    channel c1: starting datafile backup set restore
    channel c1: specifying datafile(s) to restore from backup set
    channel c1: restoring datafile 00001 to /opt/oracle/oradata/MN122010P/system01.dbf
    channel c1: restoring datafile 00002 to /opt/oracle/oradata/MN122010P/sysaux01.dbf
    channel c1: restoring datafile 00003 to /opt/oracle/oradata/MN122010P/undotbs01.dbf
    channel c1: restoring datafile 00004 to /opt/oracle/oradata/MN122010P/users01.dbf
    channel c1: restoring datafile 00005 to /opt/oracle/oradata/MN122010P/TBCESPAPOIS_01.DBF
    channel c1: restoring datafile 00006 to /opt/oracle/oradata/MN122010P/TBCESPAFONDO_01.DBF
    channel c1: restoring datafile 00007 to /opt/oracle/oradata/MN122010P/TBCESPACALLEJERO_01.DBF
    channel c1: restoring datafile 00008 to /opt/oracle/oradata/MN122010P/CESPAGEOCODER_01.DBF
    channel c1: restoring datafile 00009 to /opt/oracle/oradata/MN122010P/CESPAROUTING_01.DBF
    channel c1: restoring datafile 00010 to /opt/oracle/oradata/MN122010P/TBCESPANDM_01.DBF
    channel c1: reading from backup piece /opt/oracle/oradata/BACKUPS_01/MN122010P/backup_MN122010_t768739341_s768_p1
    After the restoring I found at standby that no archives have been applied:
    SQL> SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME,APPLIED
    FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#
    / 2 3
    no rows selected
    SQL> select * from v$Instance;
    INSTANCE_NUMBER INSTANCE_NAME
    HOST_NAME
    VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
    LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
    1 MN12201R
    server02
    11.1.0.7.0 01-DEC-11 MOUNTED NO 1 STARTED
    ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
    SQL> select message from v$dataguard_status;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    ARC1: Becoming the heartbeat ARCH
    7 rows selected.
    On primary
    MESSAGE
    ARC3: Beginning to archive thread 1 sequence 4258 (27056314-27064244)
    ARC3: Completed archiving thread 1 sequence 4258 (27056314-27064244)
    ARC0: Beginning to archive thread 1 sequence 4259 (27064244-27064251)
    ARC0: Completed archiving thread 1 sequence 4259 (27064244-27064251)
    ARC2: Beginning to archive thread 1 sequence 4260 (27064251-27064328)
    ARC2: Completed archiving thread 1 sequence 4260 (27064251-27064328)
    ARC3: Beginning to archive thread 1 sequence 4261 (27064328-27064654)
    ARC3: Completed archiving thread 1 sequence 4261 (27064328-27064654)
    Edited by: user8898355 on 01-dic-2011 7:02

    I'm seeing those errors at primary
    LNSb started with pid=20, OS id=30141
    LGWR: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (16086)
    LGWR: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
    trace file:
    *** 2011-12-02 09:52:17.164
    *** SESSION ID:(183.1) 2011-12-02 09:52:17.164
    *** CLIENT ID:() 2011-12-02 09:52:17.164
    *** SERVICE NAME:(SYS$BACKGROUND) 2011-12-02 09:52:17.164
    *** MODULE NAME:() 2011-12-02 09:52:17.164
    *** ACTION NAME:() 2011-12-02 09:52:17.164
    *** TRACE FILE RECREATED AFTER BEING REMOVED ***
    *** 2011-12-02 09:52:17.164 6465 krsu.c
    Initializing NetServer[LNSb] for dest=MN12201R.domain.es mode SYNC
    LNSb is not running anymore.
    New SYNC LNSb needs to be started
    Waiting for subscriber count on LGWR-LNSb channel to go to zero
    Subscriber count went to zero - time now is <12/02/2011 09:52:17>
    Starting LNSb ...
    Waiting for LNSb [pid 30141] to initialize itself
    *** TRACE FILE RECREATED AFTER BEING REMOVED ***
    *** 2011-12-02 09:52:17.164 6465 krsu.c
    Initializing NetServer[LNSb] for dest=MN12201R.domain.es mode SYNC
    LNSb is not running anymore.
    New SYNC LNSb needs to be started
    Waiting for subscriber count on LGWR-LNSb channel to go to zero
    Subscriber count went to zero - time now is <12/02/2011 09:52:17>
    Starting LNSb ...
    Waiting for LNSb [pid 30141] to initialize itself
    *** 2011-12-02 09:52:20.185
    *** 2011-12-02 09:52:20.185 6828 krsu.c
    Netserver LNSb [pid 30141] for mode SYNC has been initialized
    Performing a channel reset to ignore previous responses
    Successfully started LNSb [pid 30141] for dest MN12201R.domain.es mode SYNC ocis=0x2ba2cb1fece8
    *** 2011-12-02 09:52:20.185 2880 krsu.c
    Making upiahm request to LNSb [pid 30141]: Begin Time is <12/02/2011 09:52:17>. NET_TIMEOUT = <30> seconds
    Waiting for LNSb to respond to upiahm
    *** 2011-12-02 09:52:20.262 3044 krsu.c
    upiahm connect done status is 0
    Receiving message from LNSb
    Receiving message from LNSb
    LGWR: Failed
    rfsp: 0x2ba2ca55c328
    rfsmod: 2
    rfsver: 3
    rfsflag: 0x24882

  • MacBook Pro unable to broadcast using Camtwist on Justin.tv or Ustream.tv but why?

    I have been doing live broadcasts fro years on older computers but I am unable to preform live broadcast on my new MacBook Pro and I could use your help in figuring out why. 
    Unsolved Problem:I need to be able to broadcast from CamTwist as CamTwist is the only program that will allow me to do what I need to do.   Justin.tv and Ustream.tv do not recognize CamTwist for reasons I can not explain.
    I know that Justin.tv and Ustream.tv should recognize CamTwist because I currently have several  computers that are using CamTwist to broadcast  on  Justin.tv and Ustream.tv. 
    I just want to be able to broadcast live streams from my MacBookPro
    I have tried to broadcast on sites like justin.tv and ustream.tv just like I have done in the past on other computers but no luck on my MacBook Pro. 
    Here is the hardware and software I am using and have tried…
    1.  Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro6,1
      Processor Name:          Intel Core i7
      Processor Speed:          2.66 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per core):          256 KB
      L3 Cache:          4 MB
      Memory:          8 GB
      Processor Interconnect Speed:          4.8 GT/s
      Boot ROM Version:          MBP61.0057.B0C
      SMC Version (system):          1.57f17
      Serial Number (system):          ***
      Hardware UUID:          ***
      Sudden Motion Sensor:
      State:          Enabled
    I have a built in Isight that does work, but not with live broad casts.  I can confirm my isight in many apps
    2. Software Mac OSX 10.6.7
    3. Apps at my disposal. ( I have done al the most recent updates)
    (a) Firefox 4.0.1
    (b) Safari 5.0.5
    c Adobe Flas Media Live Encoder 3.2.0.9932
    (d) ManyCam v 1.0 (unable to find version 2.0 of manycam)
    (e) CamTwsit v 2.1
    (f) Quicktime broadcaster

    I am now able to do live broadcasts with my i-sight, but my original problem still exisits....
    Unsolved Problem:I need to be able to broadcast from CamTwist as CamTwist is the only program that will allow me to do what I need to do.   Justin.tv and Ustream.tv do not recognize CamTwist for reasons I can not explain.

  • DataGuard Standby 環境で db が open できない.

    DataGuard Standby 環境で db が open できなくて困っています。
    詳しい方いれば、原因と対処方法を教えていただきたいと思います。
    create した spfile が正確に読み込まれていないことが原因のようなのですが。。
    なぜ読み込めないのかが分からない状態です。
    pfile を読み込んだ起動は可能ですが、spfile を読み込んだ起動の前提条件とは、
    何なのでしょうか。単に整合性が取れていないだけなのか、それとも、、。
    [grid@osaka1 shell]$ asmcmd
    ASMCMD> ls
    DATA/
    FRA/
    ASMCMD> cd data
    ASMCMD> ls
    ASM/
    WEST/
    ASMCMD> ls -l
    Type  Redund  Striped  Time             Sys  Name
                                            Y    ASM/
                                            N    WEST/
    ASMCMD>
    ASMCMD> cd west
    ASMCMD> ls
    CONTROLFILE/
    DATAFILE/
    ONLINELOG/
    PARAMETERFILE/
    TEMPFILE/
    spfilewest.ora
    ASMCMD> ls -l
    Type           Redund  Striped  Time             Sys  Name
                                                     N    CONTROLFILE/
                                                     N    DATAFILE/
                                                     N    ONLINELOG/
                                                     N    PARAMETERFILE/
                                                     N    TEMPFILE/
                                                     N    spfilewest.ora => +DATA/WEST/PARAMETERFILE/spfile.257.824236121
    ASMCMD> pwd
    +data/west
    ASMCMD>
    ASMCMD> cd para*
    ASMCMD> ls -l
    Type           Redund  Striped  Time             Sys  Name
    PARAMETERFILE  MIRROR  COARSE   AUG 23 18:00:00  Y    spfile.257.824236121
    ASMCMD>
    ASMCMD> pwd
    +data/west/PARAMETERFILE
    ASMCMD> quit
    [grid@osaka1 shell]$
    [oracle@osaka1 dbs]$ more initHPYMUSIC.ora
    SPFILE='+DATA/west/spfilewest.ora'
    [oracle@osaka1 dbs]$
    よろしくお願い致します。
    ps.
    ORA-12154 は整合性の問題であるので、それを合わせれば消えると思っています。
    そもそも RAC を前提としていたのですが、それを standalone に置き換えて検証始めた結果、
    こうなってしまっています。
    open できない原因が ORA-12154 だったりして。。
    ■ プライマリの場合
    ○ open するほうは、シンプルに以下だけで open することが確認できる。
       が、db_name を変更した関係で
       「ORA-12154: TNS: 指定された接続識別子を解決できませんでした」
       が出続けている。
       ORA-12154 は db が open できない原因とは無関係かもしれない。
    srvctl stop database -d east -f
    srvctl start database -d east -o open
    srvctl config database -d east
    srvctl status database -d east
    ○ 参考出力
    set linesize 500 pages 0
    col value for a90
    col name for a50
    select name, value
    from v$parameter
    where name in ('db_name','db_unique_name','log_archive_config', 'log_archive_dest_1','log_archive_dest_2',
                   'log_archive_dest_state_1','log_archive_dest_state_2', 'remote_login_passwordfile',
                   'log_archive_format','log_archive_max_processes','fal_server','db_file_name_convert',
                   'log_file_name_convert', 'standby_file_management');
    SQL>
    db_file_name_convert
    log_file_name_convert
    log_archive_dest_1
    log_archive_dest_2            SERVICE=HPYMUSIC SYNC NOAFFIRM VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=west
    log_archive_dest_state_1      enable
    log_archive_dest_state_2      enable
    fal_server
    log_archive_config
    log_archive_format            %t_%s_%r.dbf
    log_archive_max_processes     4
    standby_file_management       AUTO
    remote_login_passwordfile     EXCLUSIVE
    db_name                       HPYMUSIC
    db_unique_name                HPYMUSIC    ← ▼ db_name だけを変更したつもりが db_unique_name も変更されていた
    14行が選択されました。
    [oracle@tokyo1 shell]$ srvctl stop database -d east -f
    [oracle@tokyo1 shell]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
    NAME           TARGET  STATE        SERVER                   STATE_DETAILS
    Cluster Resources
    ora.east.db
          1        OFFLINE OFFLINE                               Instance Shutdown
    [oracle@tokyo1 shell]$ srvctl start database -d east -o open
    [oracle@tokyo1 shell]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
    NAME           TARGET  STATE        SERVER                   STATE_DETAILS
    Local Resources
    ora.DATA.dg
                   ONLINE  ONLINE       tokyo1
    ora.FRA.dg
                   ONLINE  ONLINE       tokyo1
    ora.LISTENER.lsnr
                   ONLINE  ONLINE       tokyo1
    ora.asm
                   ONLINE  ONLINE       tokyo1                   Started
    Cluster Resources
    ora.cssd
          1        ONLINE  ONLINE       tokyo1
    ora.diskmon
          1        ONLINE  ONLINE       tokyo1
    ora.east.db
          1        ONLINE  ONLINE       tokyo1                   Open ← ▼
    [oracle@tokyo1 shell]$
    [oracle@tokyo1 shell]$ srvctl config database -d east
    一意のデータベース名: east
    データベース名: east
    Oracleホーム: /u01/app/oracle/product/11.2.0/dbhome_1
    Oracleユーザー: grid
    spfile: +DATA/east/spfileeast.ora
    ドメイン:
    開始オプション: open
    停止オプション: immediate
    データベース・ロール: PRIMARY
    管理ポリシー: AUTOMATIC
    ディスク・グループ: DATA,FRA
    サービス:
    [oracle@tokyo1 shell]$ srvctl status database -d east
    データベースは実行中です。
    Fri Aug 23 19:44:10 2013
    Error 12154 received logging on to the standby
    Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_7579.trc:
    ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
    [oracle@tokyo1 dbs]$ pwd
    /u01/app/oracle/product/11.2.0/dbhome_1/dbs
    [oracle@tokyo1 dbs]$
    [oracle@tokyo1 dbs]$
    [oracle@tokyo1 dbs]$ more 2013.08.23_east_pfile.txt
    HPYMUSIC.__db_cache_size=301989888
    HPYMUSIC.__java_pool_size=4194304
    HPYMUSIC.__large_pool_size=8388608
    HPYMUSIC.__pga_aggregate_target=339738624
    HPYMUSIC.__sga_target=503316480
    HPYMUSIC.__shared_io_pool_size=0
    HPYMUSIC.__shared_pool_size=176160768
    HPYMUSIC.__streams_pool_size=0
    *.audit_file_dest='/u01/app/oracle/admin/east/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='+DATA/east/controlfile/current.270.823277705','+FRA/east/controlfile/current.
    260.823277707'
    *.db_block_checking='TRUE'
    *.db_block_checksum='TRUE'
    *.db_block_size=8192
    *.db_create_file_dest='+DATA'
    *.db_domain=''
    *.db_name='HPYMUSIC'
    *.db_recovery_file_dest='+FRA'
    *.db_recovery_file_dest_size=3038773248
    *.diagnostic_dest='/u01/app/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=HPYMUSICXDB)'
    *.log_archive_format='%t_%s_%r.dbf'
    *.memory_target=842006528
    *.nls_language='JAPANESE'
    *.nls_territory='JAPAN'
    *.open_cursors=300
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.standby_file_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    Fri Aug 23 19:49:38 2013
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
    ARCH: Warning; less destinations available than specified
    by LOG_ARCHIVE_MIN_SUCCEED_DEST init.ora parameter
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =27
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options.
    Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfileHPYMUSIC.ora
    System parameters with non-default values:
      processes                = 150
      nls_language             = "JAPANESE"
      nls_territory            = "JAPAN"
      memory_target            = 804M
      control_files            = "+DATA/east/controlfile/current.270.823277705"
      control_files            = "+FRA/east/controlfile/current.260.823277707"
      db_block_checksum        = "TRUE"
      db_block_size            = 8192
      compatible               = "11.2.0.0.0"
      log_archive_dest_2       = "SERVICE=HPYMUSIC SYNC NOAFFIRM VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=west"
      log_archive_format       = "%t_%s_%r.dbf"
      db_create_file_dest      = "+DATA"
      db_recovery_file_dest    = "+FRA"
      db_recovery_file_dest_size= 2898M
      standby_file_management  = "AUTO"
      undo_tablespace          = "UNDOTBS1"
      db_block_checking        = "TRUE"
      remote_login_passwordfile= "EXCLUSIVE"
      db_domain                = ""
      dispatchers              = "(PROTOCOL=TCP) (SERVICE=HPYMUSICXDB)"
      audit_file_dest          = "/u01/app/oracle/admin/east/adump"
      audit_trail              = "DB"
      db_name                  = "HPYMUSIC"
      open_cursors             = 300
      diagnostic_dest          = "/u01/app/oracle"
    Fri Aug 23 19:49:39 2013
    PMON started with pid=2, OS id=8442
    Fri Aug 23 19:49:39 2013
    VKTM started with pid=3, OS id=8444 at elevated priority
    VKTM running at (10)millisec precision with DBRM quantum (100)ms
    Fri Aug 23 19:49:39 2013
    GEN0 started with pid=4, OS id=8448
    Fri Aug 23 19:49:39 2013
    DIAG started with pid=5, OS id=8450
    Fri Aug 23 19:49:39 2013
    DBRM started with pid=6, OS id=8452
    Fri Aug 23 19:49:39 2013
    PSP0 started with pid=7, OS id=8454
    Fri Aug 23 19:49:39 2013
    DIA0 started with pid=8, OS id=8456
    Fri Aug 23 19:49:39 2013
    MMAN started with pid=9, OS id=8458
    Fri Aug 23 19:49:39 2013
    DBW0 started with pid=10, OS id=8460
    Fri Aug 23 19:49:39 2013
    LGWR started with pid=11, OS id=8462
    Fri Aug 23 19:49:39 2013
    CKPT started with pid=12, OS id=8464
    Fri Aug 23 19:49:39 2013
    SMON started with pid=13, OS id=8466
    Fri Aug 23 19:49:39 2013
    RECO started with pid=14, OS id=8468
    Fri Aug 23 19:49:39 2013
    RBAL started with pid=15, OS id=8470
    Fri Aug 23 19:49:39 2013
    ASMB started with pid=16, OS id=8472
    Fri Aug 23 19:49:39 2013
    MMON started with pid=17, OS id=8474
    Fri Aug 23 19:49:39 2013
    MMNL started with pid=18, OS id=8478
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    NOTE: initiating MARK startup
    starting up 1 shared server(s) ...
    Starting background process MARK
    Fri Aug 23 19:49:39 2013
    MARK started with pid=20, OS id=8482
    NOTE: MARK has subscribed
    ORACLE_BASE not set in environment. It is recommended
    that ORACLE_BASE be set in the environment
    Reusing ORACLE_BASE from an earlier startup = /u01/app/oracle
    Fri Aug 23 19:49:39 2013
    ALTER DATABASE MOUNT
    NOTE: Loaded library: System
    SUCCESS: diskgroup DATA was mounted
    ERROR: failed to establish dependency between database HPYMUSIC and diskgroup resource ora.DATA.dg
    SUCCESS: diskgroup FRA was mounted
    ERROR: failed to establish dependency between database HPYMUSIC and diskgroup resource ora.FRA.dg
    Fri Aug 23 19:49:46 2013
    NSS2 started with pid=24, OS id=8572
    Successful mount of redo thread 1, with mount id 2951868947
    Database mounted in Exclusive Mode
    Lost write protection disabled
    Completed: ALTER DATABASE MOUNT
    ALTER DATABASE OPEN
    LGWR: STARTING ARCH PROCESSES
    Fri Aug 23 19:49:47 2013
    ARC0 started with pid=26, OS id=8574
    ARC0: Archival started
    LGWR: STARTING ARCH PROCESSES COMPLETE
    ARC0: STARTING ARCH PROCESSES
    Fri Aug 23 19:49:48 2013
    ARC1 started with pid=27, OS id=8576
    Fri Aug 23 19:49:48 2013
    ARC2 started with pid=28, OS id=8578
    ARC1: Archival started
    ARC2: Archival started
    ARC1: Becoming the 'no FAL' ARCH
    ARC1: Becoming the 'no SRL' ARCH
    ARC2: Becoming the heartbeat ARCH
    Fri Aug 23 19:49:48 2013
    ARC3 started with pid=29, OS id=8580
    LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
    ARC3: Archival started
    ARC0: STARTING ARCH PROCESSES COMPLETE
    Error 12154 received logging on to the standby
    Fri Aug 23 19:49:51 2013
    Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_lgwr_8462.trc:
    ORA-12154: TNS: ?????????????????????
    Error 12154 for archive log file 2 to 'HPYMUSIC'
    LGWR: Failed to archive log 2 thread 1 sequence 8 (12154)
    Thread 1 advanced to log sequence 8 (thread open)
    Thread 1 opened at log sequence 8
      Current log# 2 seq# 8 mem# 0: +DATA/hpymusic/onlinelog/group_2.272.824213887
      Current log# 2 seq# 8 mem# 1: +FRA/hpymusic/onlinelog/group_2.262.824213889
    Successful open of redo thread 1
    Fri Aug 23 19:49:51 2013
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Fri Aug 23 19:49:51 2013
    SMON: enabling cache recovery
    Error 12154 received logging on to the standby
    Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_8578.trc:
    ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
    Archived Log entry 7 added for thread 1 sequence 7 ID 0xaff1210d dest 1:
    Error 12154 received logging on to the standby
    Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc3_8580.trc:
    ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    FAL[server, ARC3]: Error 12154 creating remote archivelog file 'HPYMUSIC'
    FAL[server, ARC3]: FAL archive failed, see trace file.
    Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc3_8580.trc:
    ORA-16055: FALリクエストが拒否されました。
    ARCH: FAL archive failed. Archiver continuing
    ORACLE Instance HPYMUSIC - Archival Error. Archiver continuing.
    Successfully onlined Undo Tablespace 2.
    Verifying file header compatibility for 11g tablespace encryption..
    Verifying 11g file header compatibility for tablespace encryption completed
    SMON: enabling tx recovery
    Database Characterset is AL32UTF8
    No Resource Manager plan active
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    Fri Aug 23 19:49:55 2013
    QMNC started with pid=32, OS id=8590
    Completed: ALTER DATABASE OPEN
    Fri Aug 23 19:49:59 2013
    Starting background process CJQ0
    Fri Aug 23 19:49:59 2013
    CJQ0 started with pid=33, OS id=8609
    Fri Aug 23 19:49:59 2013
    db_recovery_file_dest_size of 2898 MB is 6.38% used. This is a
    user-specified limit on the amount of space that will be used by this
    database for recovery-related files, and does not reflect the amount of
    space available in the underlying filesystem or ASM diskgroup.
    [root@tokyo1 app]#
    [root@tokyo1 app]# more /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_8578.trc
    Trace file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_8578.trc
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Automatic Storage Management, OLAP, Data Mining
    and Real Application Testing options
    ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1
    System name:    Linux
    Node name:      tokyo1.oracle11g.jp
    Release:        2.6.18-348.12.1.el5
    Version:        #1 SMP Wed Jul 10 05:28:41 EDT 2013
    Machine:        x86_64
    Instance name: HPYMUSIC
    Redo thread mounted by this instance: 1
    Oracle process number: 28
    Unix process pid: 8578, image: [email protected] (ARC2)
    *** 2013-08-23 19:49:51.707
    *** SESSION ID:(15.1) 2013-08-23 19:49:51.707
    *** CLIENT ID:() 2013-08-23 19:49:51.707
    *** SERVICE NAME:() 2013-08-23 19:49:51.707
    *** MODULE NAME:() 2013-08-23 19:49:51.707
    *** ACTION NAME:() 2013-08-23 19:49:51.707
    Redo shipping client performing standby login
    OCIServerAttach failed -1
    .. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    OCIServerAttach failed -1
    .. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    OCIServerAttach failed -1
    .. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    *** 2013-08-23 19:49:51.972 4132 krsh.c
    Error 12154 received logging on to the standby
    *** 2013-08-23 19:49:51.972 869 krsu.c
    Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
    Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
    ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    *** 2013-08-23 19:49:51.973 4132 krsh.c
    PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
    *** 2013-08-23 19:49:51.973 2747 krsi.c
    krsi_dst_fail: dest:2 err:12154 force:0 blast:1
    *** 2013-08-23 19:50:49.816
    Redo shipping client performing standby login
    OCIServerAttach failed -1
    .. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    OCIServerAttach failed -1
    .. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    OCIServerAttach failed -1
    .. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    *** 2013-08-23 19:50:50.070 4132 krsh.c
    Error 12154 received logging on to the standby
    *** 2013-08-23 19:50:50.070 869 krsu.c
    Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
    Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
    ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    *** 2013-08-23 19:50:50.070 4132 krsh.c
    PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
    *** 2013-08-23 19:50:50.070 2747 krsi.c
    krsi_dst_fail: dest:2 err:12154 force:0 blast:1
    *** 2013-08-23 19:51:51.147
    Redo shipping client performing standby login
    OCIServerAttach failed -1
    .. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    OCIServerAttach failed -1
    .. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    OCIServerAttach failed -1
    .. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    *** 2013-08-23 19:51:51.403 4132 krsh.c
    Error 12154 received logging on to the standby
    *** 2013-08-23 19:51:51.403 869 krsu.c
    Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
    Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
    ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    *** 2013-08-23 19:51:51.403 4132 krsh.c
    PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
    *** 2013-08-23 19:51:51.403 2747 krsi.c
    krsi_dst_fail: dest:2 err:12154 force:0 blast:1
    [root@tokyo1 app]#
    [grid@tokyo1 shell]$ ./grid_info_east-x.sh
    + export ORACLE_SID=+ASM
    + ORACLE_SID=+ASM
    + LOGDIR=/home/grid/log
    + PRIMARYDB=east_DGMGRL
    + STANDBYDB=
    + PASSWORD=dataguard
    + mkdir -p /home/grid/log
    ++ date +%y%m%d,%H%M%S
    + echo 'asm info,130823,195709'
    + sqlplus / as sysasm
    SQL*Plus: Release 11.2.0.1.0 Production on 金 8月 23 19:57:09 2013
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Automatic Storage Management option
    に接続されました。
    SQL> SQL>
    SYSDATE
    13-08-23
    SQL> SQL> SQL>
    NAME                                 TYPE                VALUE
    asm_diskgroups                       string              FRA
    asm_diskstring                       string              /dev/sd*1
    asm_power_limit                      integer             1
    asm_preferred_read_failure_groups    string
    audit_file_dest                      string              /u01/app/11.2.0/grid/rdbms/audit
    audit_sys_operations                 boolean             FALSE
    audit_syslog_level                   string
    background_core_dump                 string              partial
    background_dump_dest                 string              /u01/app/grid/diag/asm/+asm/+ASM/trace
    cluster_database                     boolean             FALSE
    cluster_database_instances           integer             1
    cluster_interconnects                string
    core_dump_dest                       string              /u01/app/grid/diag/asm/+asm/+ASM/cdump
    db_cache_size                        big integer         0
    db_ultra_safe                        string              OFF
    db_unique_name                       string              +ASM
    diagnostic_dest                      string              /u01/app/grid
    event                                string
    file_mapping                         boolean             FALSE
    filesystemio_options                 string              none
    ifile                                file
    instance_name                        string              +ASM
    instance_number                      integer             1
    instance_type                        string              asm
    large_pool_size                      big integer         12M
    ldap_directory_sysauth               string              no
    listener_networks                    string
    local_listener                       string
    lock_name_space                      string
    lock_sga                             boolean             FALSE
    max_dump_file_size                   string              unlimited
    memory_max_target                    big integer         272M
    memory_target                        big integer         272M
    nls_calendar                         string
    nls_comp                             string              BINARY
    nls_currency                         string
    nls_date_format                      string
    nls_date_language                    string
    nls_dual_currency                    string
    nls_iso_currency                     string
    nls_language                         string              AMERICAN
    nls_length_semantics                 string              BYTE
    nls_nchar_conv_excp                  string              FALSE
    nls_numeric_characters               string
    nls_sort                             string
    nls_territory                        string              AMERICA
    nls_time_format                      string
    nls_time_tz_format                   string
    nls_timestamp_format                 string
    nls_timestamp_tz_format              string
    os_authent_prefix                    string              ops$
    os_roles                             boolean             FALSE
    pga_aggregate_target                 big integer         0
    processes                            integer             100
    remote_listener                      string
    remote_login_passwordfile            string              EXCLUSIVE
    remote_os_authent                    boolean             FALSE
    remote_os_roles                      boolean             FALSE
    service_names                        string              +ASM
    sessions                             integer             172
    sga_max_size                         big integer         272M
    sga_target                           big integer         0
    shadow_core_dump                     string              partial
    shared_pool_reserved_size            big integer         6081740
    shared_pool_size                     big integer         0
    sort_area_size                       integer             65536
    spfile                               string              +DATA/asm/asmparameterfile/registry.253.823204697
    sql_trace                            boolean             FALSE
    statistics_level                     string              TYPICAL
    timed_os_statistics                  integer             0
    timed_statistics                     boolean             TRUE
    trace_enabled                        boolean             TRUE
    user_dump_dest                       string              /u01/app/grid/diag/asm/+asm/+ASM/trace
    workarea_size_policy                 string              AUTO
    ++ date +%y%m%d,%H%M%S
    + echo 'asmcmd info,130823,195709'
    + asmcmd ls -l
    State    Type    Rebal  Name
    MOUNTED  NORMAL  N      DATA/
    MOUNTED  NORMAL  N      FRA/
    + asmcmd ls -l 'data/asm/*'
    Type              Redund  Striped  Time             Sys  Name
    ASMPARAMETERFILE  MIRROR  COARSE   AUG 11 19:00:00  Y    REGISTRY.253.823204697
    + asmcmd ls -l 'data/east/*'
    Type           Redund  Striped  Time             Sys  Name
    +data/east/CONTROLFILE/:
    CONTROLFILE    HIGH    FINE     AUG 12 15:00:00  Y    Current.260.823276231
    CONTROLFILE    HIGH    FINE     AUG 23 19:00:00  Y    Current.270.823277705
    +data/east/DATAFILE/:
    DATAFILE       MIRROR  COARSE   AUG 12 15:00:00  Y    SYSAUX.257.823276133
    DATAFILE       MIRROR  COARSE   AUG 23 19:00:00  Y    SYSAUX.267.823277615
    DATAFILE       MIRROR  COARSE   AUG 12 15:00:00  Y    SYSTEM.256.823276131
    DATAFILE       MIRROR  COARSE   AUG 23 19:00:00  Y    SYSTEM.266.823277615
    DATAFILE       MIRROR  COARSE   AUG 12 15:00:00  Y    UNDOTBS1.258.823276133
    DATAFILE       MIRROR  COARSE   AUG 23 19:00:00  Y    UNDOTBS1.268.823277615
    DATAFILE       MIRROR  COARSE   AUG 12 15:00:00  Y    USERS.259.823276133
    DATAFILE       MIRROR  COARSE   AUG 23 19:00:00  Y    USERS.269.823277615
    +data/east/ONLINELOG/:
    ONLINELOG      MIRROR  COARSE   AUG 12 15:00:00  Y    group_1.261.823276235
    ONLINELOG      MIRROR  COARSE   AUG 12 15:00:00  Y    group_2.262.823276241
    ONLINELOG      MIRROR  COARSE   AUG 12 15:00:00  Y    group_3.263.823276247
    +data/east/PARAMETERFILE/:
    PARAMETERFILE  MIRROR  COARSE   AUG 23 12:00:00  Y    spfile.265.823277967
    +data/east/TEMPFILE/:
    TEMPFILE       MIRROR  COARSE   AUG 12 15:00:00  Y    TEMP.264.823276263
    TEMPFILE       MIRROR  COARSE   AUG 23 19:00:00  Y    TEMP.274.823277733
                                                     N    spfileeast.ora => +DATA/EAST/PARAMETERFILE/spfile.265.823277967
    + asmcmd ls -l 'fra/east/*'
    Type         Redund  Striped  Time             Sys  Name
    +fra/east/ARCHIVELOG/:
                                                   Y    2013_08_12/
                                                   Y    2013_08_15/
                                                   Y    2013_08_19/
                                                   Y    2013_08_22/
                                                   Y    2013_08_23/
    +fra/east/CONTROLFILE/:
    CONTROLFILE  HIGH    FINE     AUG 12 15:00:00  Y    Current.256.823276231
    CONTROLFILE  HIGH    FINE     AUG 23 19:00:00  Y    Current.260.823277707
    +fra/east/ONLINELOG/:
    ONLINELOG    MIRROR  COARSE   AUG 12 15:00:00  Y    group_1.257.823276237
    ONLINELOG    MIRROR  COARSE   AUG 23 19:00:00  Y    group_10.272.823535727
    ONLINELOG    MIRROR  COARSE   AUG 23 19:00:00  Y    group_11.273.823535737
    ONLINELOG    MIRROR  COARSE   AUG 23 19:00:00  Y    group_12.274.823535745
    ONLINELOG    MIRROR  COARSE   AUG 23 19:00:00  Y    group_13.275.823535757
    ONLINELOG    MIRROR  COARSE   AUG 23 19:00:00  Y    group_14.276.823535763
    ONLINELOG    MIRROR  COARSE   AUG 23 19:00:00  Y    group_15.277.823535771
    ONLINELOG    MIRROR  COARSE   AUG 12 15:00:00  Y    group_2.258.823276245
    ONLINELOG    MIRROR  COARSE   AUG 12 15:00:00  Y    group_3.259.823276251
    ONLINELOG    MIRROR  COARSE   AUG 23 19:00:00  Y    group_7.269.823535685
    ONLINELOG    MIRROR  COARSE   AUG 23 19:00:00  Y    group_8.270.823535695
    ONLINELOG    MIRROR  COARSE   AUG 23 19:00:00  Y    group_9.271.823535703
    +fra/east/STANDBYLOG/:
                                                   N    standby_group_07.log => +FRA/EAST/ONLINELOG/group_7.269.823535685
                                                   N    standby_group_08.log => +FRA/EAST/ONLINELOG/group_8.270.823535695
                                                   N    standby_group_09.log => +FRA/EAST/ONLINELOG/group_9.271.823535703
                                                   N    standby_group_10.log => +FRA/EAST/ONLINELOG/group_10.272.823535727
                                                   N    standby_group_11.log => +FRA/EAST/ONLINELOG/group_11.273.823535737
                                                   N    standby_group_12.log => +FRA/EAST/ONLINELOG/group_12.274.823535745
                                                   N    standby_group_13.log => +FRA/EAST/ONLINELOG/group_13.275.823535757
                                                   N    standby_group_14.log => +FRA/EAST/ONLINELOG/group_14.276.823535763
                                                   N    standby_group_15.log => +FRA/EAST/ONLINELOG/group_15.277.823535771
    + asmcmd find +data 'group*'
    +data/EAST/ONLINELOG/group_1.261.823276235
    +data/EAST/ONLINELOG/group_2.262.823276241
    +data/EAST/ONLINELOG/group_3.263.823276247
    +data/HPYMUSIC/ONLINELOG/group_1.271.824213881
    +data/HPYMUSIC/ONLINELOG/group_2.272.824213887
    +data/HPYMUSIC/ONLINELOG/group_3.273.824213895
    + asmcmd find +data 'spf*'
    +data/EAST/PARAMETERFILE/spfile.265.823277967
    +data/EAST/spfileeast.ora
    + asmcmd ls -l data/east/CONTROLFILE
    Type         Redund  Striped  Time             Sys  Name
    CONTROLFILE  HIGH    FINE     AUG 12 15:00:00  Y    Current.260.823276231
    CONTROLFILE  HIGH    FINE     AUG 23 19:00:00  Y    Current.270.823277705
    + asmcmd find +fra 'group*'
    +fra/EAST/ONLINELOG/group_1.257.823276237
    +fra/EAST/ONLINELOG/group_10.272.823535727
    +fra/EAST/ONLINELOG/group_11.273.823535737
    +fra/EAST/ONLINELOG/group_12.274.823535745
    +fra/EAST/ONLINELOG/group_13.275.823535757
    +fra/EAST/ONLINELOG/group_14.276.823535763
    +fra/EAST/ONLINELOG/group_15.277.823535771
    +fra/EAST/ONLINELOG/group_2.258.823276245
    +fra/EAST/ONLINELOG/group_3.259.823276251
    +fra/EAST/ONLINELOG/group_7.269.823535685
    +fra/EAST/ONLINELOG/group_8.270.823535695
    +fra/EAST/ONLINELOG/group_9.271.823535703
    +fra/HPYMUSIC/ONLINELOG/group_1.261.824213883
    +fra/HPYMUSIC/ONLINELOG/group_2.262.824213889
    +fra/HPYMUSIC/ONLINELOG/group_3.263.824213897
    + asmcmd find +fra 'spf*'
    + asmcmd ls -l fra/east/CONTROLFILE
    Type         Redund  Striped  Time             Sys  Name
    CONTROLFILE  HIGH    FINE     AUG 12 15:00:00  Y    Current.256.823276231
    CONTROLFILE  HIGH    FINE     AUG 23 19:00:00  Y    Current.260.823277707
    ++ date +%y%m%d,%H%M%S
    + echo END,130823,195712
    [grid@tokyo1 shell]$
    ■ 以下、スタンバイ側 ■ ■ ■ ■ ■ ■ ■
    export ORACLE_SID=HPYMUSIC
    sqlplus / as sysdba
    startup nomount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
    create spfile='+data/west/spfilewest.ora' from pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt';
    srvctl stop database -d west -f
    srvctl start database -d west -o open
    srvctl start database -d west -o mount
    srvctl start database -d west
    startup mount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
    srvctl start database -d west -o open
    srvctl config database -d west
    srvctl status database -d west
    alter database recover managed standby database disconnect from session;
    select name, database_role, open_mode from gv$database;
    srvctl modify database -d west -s open
    ○ spfile を作成する
    export ORACLE_SID=HPYMUSIC
    sqlplus / as sysdba
    startup nomount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
    create spfile='+data/west/spfilewest.ora' from pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt';
    ○ 落とす
    srvctl stop database -d west -f
    ○ open したいが起動しない（ Mounted (Closed) 状態で起動することもある）。
    srvctl start database -d west -o open
    PRCR-1079 : リソースora.west.dbの起動に失敗しました
    CRS-2674: Start of 'ora.west.db' on 'osaka1' failed
    ○ open したいが起動しない（ Mounted (Closed) 状態で起動することもある）。
    srvctl start database -d west -o mount
    PRCR-1079 : リソースora.west.dbの起動に失敗しました
    CRS-2674: Start of 'ora.west.db' on 'osaka1' failed
    ○ open したいが起動しない（ Mounted (Closed) 状態で起動することもある）。
    srvctl start database -d west
    PRCR-1079 : リソースora.west.dbの起動に失敗しました
    CRS-2674: Start of 'ora.west.db' on 'osaka1' failed
    ○ 起動するがエラーあり（ alert_HPYMUSIC.log ）
    startup mount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
    [oracle@osaka1 dbs]$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on 金 8月 23 19:05:35 2013
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    アイドル・インスタンスに接続しました。
    SQL> startup mount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
    ORACLEインスタンスが起動しました。
    Total System Global Area  839282688 bytes
    Fixed Size                  2217992 bytes
    Variable Size             515901432 bytes
    Database Buffers          314572800 bytes
    Redo Buffers                6590464 bytes
    データベースがマウントされました。
    Error 12154 received logging on to the standby
    FAL[client, ARC3]: Error 12154 connecting to HPYMUSIC for fetching gap sequence
    Errors in file /u01/app/oracle/diag/rdbms/west/HPYMUSIC/trace/HPYMUSIC_arc3_25690.trc:
    ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    Errors in file /u01/app/oracle/diag/rdbms/west/HPYMUSIC/trace/HPYMUSIC_arc3_25690.trc:
    ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    ○ open にならず Mounted (Closed) としかなってくれない。
    srvctl start database -d west -o open
    [oracle@osaka1 dbs]$ srvctl start database -d west -o open
    [oracle@osaka1 dbs]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
    NAME           TARGET  STATE        SERVER                   STATE_DETAILS
    Local Resources
    ora.DATA.dg
                   ONLINE  ONLINE       osaka1
    ora.FRA.dg
                   ONLINE  ONLINE       osaka1
    ora.LISTENER.lsnr
                   ONLINE  ONLINE       osaka1
    ora.asm
                   ONLINE  ONLINE       osaka1                   Started
    Cluster Resources
    ora.cssd
          1        ONLINE  ONLINE       osaka1
    ora.diskmon
          1        ONLINE  ONLINE       osaka1
    ora.west.db
          1        ONLINE  INTERMEDIATE osaka1                   Mounted (Closed)
    ○
    srvctl config database -d west
    srvctl status database -d west
    [oracle@osaka1 dbs]$ srvctl config database -d west
    一意のデータベース名: west
    データベース名: HPYMUSIC
    Oracleホーム: /u01/app/oracle/product/11.2.0/dbhome_1
    Oracleユーザー: grid
    spfile: +data/west/spfilewest.ora
    ドメイン:
    開始オプション: open
    停止オプション: immediate
    データベース・ロール: physical_standby
    管理ポリシー: AUTOMATIC
    ディスク・グループ: DATA,FRA
    サービス:
    [oracle@osaka1 dbs]$ srvctl status database -d west
    データベースは実行中です。
    ○ mrp プロセスが起動するが、Read Only ではない。
    alter database recover managed standby database disconnect from session;
    select name, database_role, open_mode from gv$database;
    [oracle@osaka1 dbs]$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on 金 8月 23 19:33:08 2013
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Automatic Storage Management, OLAP, Data Mining
    and Real Application Testing options
    に接続されました。
    SQL>
    SQL> alter database recover managed standby database disconnect from session;
    データベースが変更されました。
    SQL> select name, database_role, open_mode from gv$database;
    NAME                        DATABASE_ROLE
    OPEN_MODE
    HPYMUSIC                    PHYSICAL STANDBY
    MOUNTED
    [root@osaka1 app]# ps -ef |egrep -i mrp
    oracle   26269     1  0 19:33 ?        00:00:00 ora_mrp0_HPYMUSIC
    ○ modify しても open にならない。
    srvctl modify database -d west -s open
    [oracle@osaka1 dbs]$ srvctl modify database -d west -s open
    [oracle@osaka1 dbs]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
    NAME           TARGET  STATE        SERVER                   STATE_DETAILS
    Local Resources
    ora.DATA.dg
                   ONLINE  ONLINE       osaka1
    ora.FRA.dg
                   ONLINE  ONLINE       osaka1
    ora.LISTENER.lsnr
                   ONLINE  ONLINE       osaka1
    ora.asm
                   ONLINE  ONLINE       osaka1                   Started
    Cluster Resources
    ora.cssd
          1        ONLINE  ONLINE       osaka1
    ora.diskmon
          1        ONLINE  ONLINE       osaka1
    ora.west.db
          1        ONLINE  INTERMEDIATE osaka1                   Mounted (Closed)

    standby 側に、アーカイブログファイルを少し適用すれば open できそうに感じます。
    これを解決するためには、以下のエラーを解決するのがよいと思います。
    ・ORA-12154: TNS: 指定された接続識別子を解決できませんでした
    両ノードの tnsnames.ora を確認させて貰えますか？
    この推測が間違えていたら再検討しましょう。

  • Questions on dataguard

    I have quick couple of questions on dataguard.
    1) how much time time it will take to generate (move ) the logfiles from production to standby database ?
    2) Can we speed up the transfer the logfile from PROD to Standby?
    3) If 2nd Questions is YES. How can i speed up the process?
    In IBM DB2 its just 30 Sec max to replicate the data from PROD to STANDBY. Becasue we dont want to loose the data for a while.
    Thanks
    Krish
    Message was edited by:
    Venkat.K.Raju

    What is your database version?
    Assuming that it is 10g R2, the following white paper has all the answers you need:
    Data Guard Redo Transport & Network Best Practices Oracle Database 10g Release 2
    (http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_DataGuardNetworkBestPractices.pdf)

  • 5 Dataguard questions on implementation and maintainence

    I have created Oracle10g Dataguard Physical standby. Everything seems to working properly. I switch a log@primary and i see it applied at standby. In OEM the Primary instance is shown as "Primary" and Dataguard Normal.
    Questions
    =======
    1.I used cold backup to create physical standby where i copied just the datafiles. I DID NOT copy the online logfiles from primary DB . Is this ok?
    Reason i am asking is, I am seeing this in alertlog (Please see in Bold below). Could this message in alert be ignored?
    Fri Mar 14 16:11:55 2008
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[5]: Assigned to RFS process 9652
    RFS[5]: Identified database type as 'physical standby'
    Fri Mar 14 16:11:57 2008
    Media Recovery Waiting for thread 1 sequence 140 (in transit)
    Fri Mar 14 16:12:09 2008
    RFS[4]: Archived Log: '/b03/archive/PRI/arch1_140_649240729.arc'
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[4]: No standby redo logfiles created
    Fri Mar 14 16:12:12 2008
    Media Recovery Log /b03/archive/PRI/arch1_140_649240729.arc
    Media Recovery Waiting for thread 1 sequence 141 (in transit)
    Fri Mar 14 16:12:58 2008
    2. Physical standby was created in default mode " MAX PERFORMANCE" but i followed the manual and i realize i created standby redo logs at primary DB.
    Is it true we do not need standby redo logs for MAX PERFORMANCE mode?
    3. What is the quickest way to create a physical standby taking into consideration the downtime of the primary database.
    4. Can we setup Dataguard for a live running production database (assuming prod is all set with prepare steps as laid out in manual) without downtime.
    5. I hear dataguard management involves lot of shell scripting for log shipping, failover, switchover etc. Looking at 10g manual all these appear to be handled automatically if configured. Is it true that all the Dataguard functionality is auto and does not need shell scripting?
    These are the things came up to mind. Please list any others you can think of for a Dataguard implementation. Any help greatly appreciated.
    Thanks and have a great time.
    S~

    My question is , I havent created either online logfiles or standby log files on the secondary database, then how is RFS process applying the logs to the standby database?
    If you do not create standby log files on the secondary database, then RFS process will apply logs from primary DB's archieved redo logs, refer 5.1 Introduction to Redo Transport Services.(http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_transport.htm)
    Also i see entries in v$log@standby, since i haven't created log files@standby where is this info getting from?
    It will be through the entry in Stndby DB parameter file "LOG_FILE_NAME_CONVERT=
    '/arch1/chicago/','/arch1/boston/','/arch2/chicago/','/arch2/boston/'
    Thanks

  • Not able to get data of primary in standby database (configured dataguard)

    Hi all, I configured dataguard in my local system, i ve a few qsns (as i am new, ve patience)
    1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
    2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
    ORA-01110: data file 2: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSAUX01.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 3 - see DBWR trace file
    ORA-01110: data file 3: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\UNDOTBS01.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
    ORA-01110: data file 4: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\USERS01.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 5 - see DBWR trace file
    ORA-01110: data file 5: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\EXAMPLE01.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 6 - see DBWR trace file
    ORA-01110: data file 6: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\STREAM_TBS.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 7 - see DBWR trace file
    ORA-01110: data file 7: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\DATA01.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    ORA-16004 signalled during: alter database open read only...
    3)wen i try to open standby database in read only mode gives below error..how do i solve it?
    ERROR at line 1:
    ORA-16004: backup database requires recovery
    ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
    ORA-01110: data file 1:
    'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSTEM01.DBF'

    971424 wrote:
    Hi all, I configured dataguard in my local system, i ve a few qsns (as i am new, ve patience)
    1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?Please do not use IM language here, instead of "qsns" use questions.
    SCN can be differ in standby and it can be behind to primary based on the backup you have restored. Of course by performing recovery you can synchronize standby with primary database. You can use incremental backups for standby using link http://www.oracle-ckpt.com/rman-incremental-backups-to-roll-forward-a-physical-standby-database-2/
    2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
    ORA-01110: data file 2: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSAUX01.DBF'
    ORA-27041: unable to open fileFirst check whether those files are exist in that location or not and if file names are different other than primary then rename file locations. Also check the permissions on the folder/files.

  • HT4527 Okay ... So I wish to transfer my itunes library to a new mac from a PC.   Question, I do not have an single "iTunes" folder, I have three, because I have created several itunes libraries:  Richard's iTunes, Justin's iTunes, and Rachael's iTunes fo

    I am trying to follow the instrucitons for moving my iTunes account to a new Mac from a PC.  I wish to use the External Hardrive Method,  (also I have too much info to fit into the free iCloud space) ... and I am wondering how to handle several iTunes accounts for my son and daughter.  We all share the itunes media folder, but I use the control-click option to open either mine, my sons, or my dauthers account.
    I.e.  On the old windows PC I have itunes, Richard's itunes, Justin's itunes, and Rachael's iTunes folders.  The instructions speak of the simple itunes folder ... so, do I copy all of these folders to the external hard drive and will things operate as before?

    Yes, you copy each one's iTunes folder to the /Home/Music/ folder in each of their separate user accounts. You will first need to create a separate user account for each of them using the Users & Groups preferences.
    MacWorld - Move an iTunes library from a Windows PC to a Mac
    Mac OS X 10.7 Help- Create a new user or group account
    Mac OS X- Setting Up User Accounts

  • How to configure oracle dataguard for connecting to the second nic.

    hi
    i want deploy my oracle dataguard on a remote site on a separate lease line
    and on the second nic of the primary. i just have a concern that what
    configurations should be made in the primary or standby to make sure the replication can work as the first nic is connected to receive the general database
    data and the second nic is being planned for replication only.
    so how standby will come to know that it has to pick which one of then.
    waiting for an early reply
    manish lall
    [email protected]

    thanks for the reply
    does that mean nothing is to be needed to configure for oracle standby as such.
    can you give me some idea of how this ip routing configuration will be done

  • How to configure Oracle Dataguard for Oracle 10g database

    Hi Friends,
    I would like to configuer Oracle Dataguard for my Oracle 10g Database.
    Please provide me the configuration document.(step by step guide)
    Regards,
    DB

    Hi
    Go throw below link. This would be help to configure ODG..,
    http://blogs.oracle.com/AlejandroVargas/2007/09/data_guard_physical_standby_im.html
    http://blogs.oracle.com/AlejandroVargas/2007/10/data_guard_broker_observer_and.html
    Thanks,
    Mayilselvan.S

Maybe you are looking for

  • Should I be able to charge my battery when watching video/playing music on my computer?

    I recently have been having trouble with my macbook pro, says it's an 8.1 using OS X version 10.6.8. The other day, it would not charge unless I shut the cover for the computer. Took it to an authorized Apple repair place and they gave it a quick loo

  • PS CS6: stroke color picker preview in real time not working

    re: NEW color picker stroke color not updating in real time (previewing). Is it me or has the stroke color preview been removed in CS6 or is there a setting that needs to be changed to enable it? The problem: When I create a shape layer, press enter

  • ITunes 6 download page will not populate

    I'm trying to download itunes 6 but the download website will not fully populate. There is no download button. I click on update to itunes 6 and it takes me to the download page but it's not completely there...any help would be greatly appreciated. T

  • Adding Attribute to Infoobjects

    Dear Colleagues, I a bit confussed to see the result of th following situation: I have 10 Areas and 100 branches. 1 sales area can have any number of branches (say 3 or 4) and 1 branch can not be assigned to 2 areas. Now in BW, I will create two sepe

  • Education pricing and Corporae Discount

    Can I use education pricing adn an employee purchase program benefit discount? I can't seem to make the too chow up together only one or the other.