Justplugged in a new to me router and it is flashing yellow not green ion the front

Just plugged in a new to me router and it is flashing yellow not green on the front ? I am communicating with it via my w7 just fine .

You need a later utiity than windows to properly set them up.. iOS one is best.. after that the Mac version.

Similar Messages

I have just set up a new talk talk router and lost Apple TV?

I have just set up a new talk talk router and have lost Apple TV and and Air Play, how do I retrie it?

I am on 10.7, so Mail interface may look a bit different, but here a couple of screenshots - on the (Preferences) accounts page, look at the bottom for outgoing mail server and then choose Edit:
In the resulting window:
enter the information needed; also click on Advanced and enter any info/port numbers given to you (unless it does it automatically).

Just moved to new home, updated router and new system with Time Warner and now we cannot get the appl

just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?

Castle15 wrote:
just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
Cannot get the Apple.. what?
Model and actual device you are talking about?
Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work.

I am trying to install the new update and it says I am not connected to the Internet . Any suggestions?

once again I am trying to download the new update 8.1.3 and it says I am not connected to the Internet which I am. Any suggestions ?

Have you tried restarting or resetting your iPad or your router?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Even though you are connected to the Internet, sometimes resetting your router can help. It's very easy to do. Just unplug it for about 30 seconds, plug it back in and let it start up.

TS1474 I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer. How do I resolve that so I can literally connect it to my new computer and transfer all my mus

I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer. How do I resolve that so I can literally connect it to my new computer and transfer all my music? Any help is much appreciated.

I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer.
It doesn't quite work that way. Transfer your music from the old computer to the new one. Then, sync the iPod.
iTunes: How to move your music from one computer to another:
http://support.apple.com/kb/HT4527

I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password

I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password even though itunes recognizes my password

This has been posted for almost 2 weeks and not one reply. Thanks a bunch! As a newbie to OOo and Mozilla, I am not impressed with responsiveness to support needs with either. So, the future of my new experiment with going non-Microsoft remains an open question.
Oddly enough, the problem mysteriously went away. I have followed the same routine and changed no settings. Suddenly all of the downloaded spreadsheets were no longer read-only. So I consider the matter resolved.

Trying to connect my iphone 4 to my home wifi network! my android phone gives me the option of pushing the arrows button on my router and on my android phone but cannot find the "push the arrows button" option on my iphone 4. is this option available???

trying to connect my iphone 4 to my home wifi network! my android phone gives me the option of pushing the arrows button on my router and on my android phone but cannot find the "push the arrows button" option on my iphone 4. is this option available?? and if so, where is it located???

No such option on an iPhone. Just go to Settings>wifi, tap the name (SSID) of your your home network from the list, then when prompted, enter the password.

I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?

I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?

I have to ask,
Are you making sure you are in park before attempting the sync? The car won't allow you to do it in motion, whether or not you're the passenger.

TS4498 Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loq

Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loqic X. So I would suggest to make a bridge in Logic X. As it was in version 9 of the Logic.

In addition.. Focusrite have stated they will not be releasing a 64bit version of Liquid Mix as they consider it outdated software these days.... even though at one point a limited release beta version had a 64bit AU version included but it was so unstable it was rapidly dropped...
However the 32bit to 64bit bridge plugin 32 Lives, states it will handle and 'convert' the Stereo version of Liquid Mix to 64bit but not the Mono version... within LPX
http://www.soundradix.com/products/32-lives/compatibility
Finally, like others here, I would be extremely surprised if Apple added 32bit AU support back into LPX.. That '32bit tech' is long dead and gone....in terms of modern DAWs... as it is in other DAWs such as the recent PT versions...

Just brought a new Mac Book Pro and wondered how to move my apps from the iPad to this?

Just brought a new Mac Book Pro and wondered how to move my apps from the iPad to this?

iPad apps will not run on a Mac.
iPads use the iOS operating system. Macs use the OS X operating system. Apps for one won't run on the other.
The most that you can do is store the content on your iPad in the content libraries of iTunes for Mac. You can play the music, movies, TV shows, and podcasts from the iPad using iTunes on the Mac. As well as, read iBooks from the iPad in iBooks for Mac.
http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf

Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.

Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.

Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I have a Sony Mini HiFi ((CMT-BX70DBI) and my 4th gen does not fit on the iPod dock. I assume I need a new adaptor but don't know which one??

I have a Sony Mini HiFi (CMT- BX70DBI) and my 4th gen does not fit on the dock. I assume I need an adaptor, but which one?

If the Sony uses the Universal Dock System you need this adopter. If it does not they try Sony.
http://store.apple.com/us/product/MC650ZM/A?fnode=MTY1NDA0OQ&mco=MTg5MTgxMjc

My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector

I'm happy to say that I solved the problem, and for the community (for the "next generation" that will search a solution for this problem) - I will publish the solution for this problem : I defined as new iphone, and then the restore showed up!
All wishes everyone...

My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

can somebody please help me fix this issue, i have been sitting at my computer all last night and this morning trying to figure it out. It could be the hardrive or anything really i just need to get it working. Alot of important things that need to be done using this computer and i am freaking out.
My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Justplugged in a new to me router and it is flashing yellow not green ion the front

Similar Messages

Maybe you are looking for