JVC old camcorder into FCP X

I want to digitize my VHS tapes. I have 2 questions. First, will my hardware/software combo be capable of performing the task. Second, since I am new to FCP, can you give me the first few steps in FCP X?
Here is my hardware/software setup:
1. VCR: JVC HR-S7600U SUPER-VHS VCR - output via S-Video and RCA audio cables
2. CAMCORDER: JVC GR-DVL915U MiniDV Camcorder - output via Dynex Firewire 800 9-to-4 Pin Cable
3. COMPUTER: Mid-2012 MacBook Pro 15" Non-Retina - Mac OS X 10.7.4, 2.6 GHz Intel Core i7, 8GB 1600 MHz DDR3
4. SOFTWARE: Final Cut Pro X version 10.0
Basically, the signal-path I have in mind looks like this:
VHS+VCR to Camcorder via S-Video and RCA audio cables
Camcorder to Computer via 9-to-4 pin Firewire cable
Import via FCP X
Please let me know if you forsee any problems with this. Assuming the signal-path works, I still need advice on how to run FCP X to perform the actual import and convert.
Thanks!

You need to post this over in the FCP-X forum:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x
This forum is for FCP-7 and earlier.
MtD

Similar Messages

Importing video from a JVC HD7U camcorder into iMovie 11

I am having trouble importing video from a JVC HD7U camcorder into iMovie 11. The import screen shows up and recognizes the camera with the time counter activating but there is no image on the screen and the record or import buttons do not seem to do anything. I have followed the instructions from the manual and others found online. Someone please help. Terry

Hi Brady,
I have a new Everio HD that I have been fooling with all day. Finally got a clip into iMovie 6 ....but only once and I'm still figuring this out too.....if you are not using a HD camera this may or may not work for you.
The Everio Quicktime extension must be installed. (Download and install the patch if you upgrade to Leopard).
Is your camera an HD? If so you need to capture the clip in 1440 CDR not FHD (FullHighDef).
Launch iMovie 6. Create a new movie in Video format HDV 1080i . then plug in your camera via firewire.
Put the camera in playback mode (Play/REC), press the Function, select Dubbing Playback (bottom of the menu). You should get a menu with a start button now. Switch to iMovie 6 and select "Import". This should start the clip playing from the camera....you may have to hit the Start on the camera.
This should get your clips into i Movie.
We may be ably to create playlists and get them in that way too but I have not had any luck with the JVC instructions to do this. There are video tutorials on the JVC website too but again they have not worked for me.
There is also a way to get and work the FHD files but that is a USB file transfer followed by a file conversion. I'll tackle that a little later...
Good luck,
Roger

HELP!! importing footage from JVC EVERIO HD Camcorder to FCP

Hi there,
I 'm trying to import files from a JVC Everio HD Camcorder into FCP then convert to QT or MPEG files. Can anyone advise on how to extract the .mov files from the camera?

Hey, Ive tried this as well installed the quicktime component and it doesnt seem to want to open any of the tod files in quicktime to convert it... gives me an error message saying the movie is an incorrect duration or something
Message was edited by: Spielberg Disciple

Need help: Can't import old video into Final Cut Pro X or iMovie

I am trying to import some footage from my old camcorder into my iMac.
I have a Sony DVMC-DA1 connected via firewire. The setup works great in iChat. We were able to video chat to my wife's computer and she could see and hear the camcorder footage. iMovie does not recognize the device at all. Final Cut Pro recognizes it. It appears in the Camera Import window, but when I try to import some footage, nothing gets recorded. Oddly, there are two time counters in the import window. The one on the left increments as the footage 'imports' but the one on the right stays at zero.
My iMac is the newest 2011 model and I am using the latest versions of iMovie and FCPX.
How do I get either iMovie or FCPX to import my footage from the DVMC-DA1?

This guy did a tutorial for 2 free ways of importing video over FW:
http://www.youtube.com/watch?v=rVqkSlaTr-k
They both should accept any video over FW. The link for Vidi is old, here's where to find it: http://www.mitzpettel.com/
Good luck.

How do I import mpg files made by an old Sony camcorder into iMovie 11?

How do I import mpg files made by an old Sony camcorder into iMovie 11?

I had the same problem. Here is a very easy solution that worked for me.
1- Open the .mpg video with QuickTime Player
2-Go to file/export/ and pick the "Ipad,Iphone,Ipod Touch & AppleTV" option
3-Save your movie with the option "ipod touch &iphone 3GS" picked
4-Confirm by choosing folder of choice to save it in
Now this new version of the movie should be able to be read in imovies.
Hope that helps!
Good luck.

Camcorder to fcp

Hi,
I was hoping someone could help me.. I have a JVC GY-110U High Def camcorder that i shot a short HD video on. When i try to import it into fcp, it cannot recognize the camera.. Is there a sneaky work around i could use? or am i just missing something? If you could let me know i would appreciate it.. I know my two decks are too old for high def, and i am just trying to get it logged in. Thanks so much. I really appreciate it.

Which version of FCP are you running? Anything prior to FCP 5.0 will not see that camera.
Shane

Trouble importing HDV mini DV footage from my Sony HVR Z7U into FCP 6.0.6

Cannot import HDV mini DV footage from my HVR Z7U camcorder into Final Cut Pro
I can Import the footage as an NTSC 720x480 signal.
One consistent answer is to make sure that in camcorders menu settings that the IN/OUT REC - iLINK SET is set to off.
No Luck, no communication with FCP in that mode.
That being said when cameras ilink is on I can import 740/480 NTSC video, not HDV.
Here’s where I’m at now
The video was shot in 1080i 30p onmini DV. With my Sony HVR Z7U Ican only import the video into FCP as a NTSC 720x480 signal. It looks great butnot in HDV?
I believe I have tried most every setting in my FCP audio video settings to import the HD footage into FCP. FCPseems to only recognize the camcorder in the NTSC mode.
Example - In FCP Audio /Video Settings
Sequence Preset - HDV 108030p
Capture Preset    - HDV
Device Control     - HDV FireWire Basic
Video Playback   - Only gives none or NTSC choices(I chose Apple FireWire)
With the setting above and Sony’s ilink off- window alert reads…
“Device is not connected or the capture preset is not set up correctly. You may still log offline clips. This might also happen if you play DV footage in an HDV device.” The camcorder viewer reads the digital footage as 1080i 30p. So it’s not shot in DV footage.
With the iLink on - I get the same window alert. Unless I capture in NTSC
For me FCP will only log and capture the footage when the Capture and Device Control Presets are set to a NTSC format and the camcorder ilink is on. Hence an NTSC 720x480 signal is imported. Not HDV?
Come on, I know this a common problem and I must be missing something very simple. Please Help! Many thanks.
Gary Boland
FCP 6.0.6
Mac G5
Someone mentioned using log and transfer. I use this with all my Compact Flash HD videos. I have found no info for importing HDV from mini DV in log and transfer with a (my) camcorder.

Gary, this is the Final Cut Pro X forum. You might try the other forum for FCP. Still, I have the Z5U Sony which is nearly identical to your camera except for the zoom as I recall. I think we have the same menu system. I see to recall there is a menu option that sets the output file format. Also you can set it to record in SD as well as I recall. I read my files in from tape to FCP X easily ... in high def. Best wishes.
stephen

Can't import Media into FCP X

In the last week or two when I try to import media into FCP X I end up with a very dark and locked import screen. The only way I can recover is to force quit FCP X. It doesn't always happen but it is getting more and more frequent.
I have not updated to Marverik and I'm running the latest version of FCP X on the same iMac I have used since installation.
Any suggestions beacuse it really is starting to beome very, very frustrating.
Thanks

They system is hanging up, waiting on some command to finish, which is not able to. So let's look at ways to fix this. Becasue you never want to do an upgrade to fix problems. Only upgrade a proerly working system. Otherwise, you may just be hauling old problems into a new envoronment, and making things worse. I've seen it a lot over the years.
First, verify that all of your drives have at least 15% of their total capacity as free space. Not enough free space on any dirve can cause similar odd behaviors.
Second, you need to do some housee cleaning. Start by downloading and running the free application "Preference Manager" from Digital Rebellion (dot com). Use it to trash the FCPX preference files. It is easy and safe to you. None of your media or projects will be touched. After that, run Disk Utility to "Repair" all of your drives (ignore "Verify", total waste of time).
If none of that helps, I'd recommand you download the free application "FCS Remover" from Digital Rebellion. Use it to uninstall FCPX. Some folks say to just move the app from the Applications folder to the Trash. That leaves a bunch of other files hanging around that could be bad. Use this app. Once you've uninstalled FCPX, launch the App Store, go to the Purchases section, and FCPX will have an "Install" button. Reinstall a fresh copy, see if that helps.

Hi8 into FCP X

I need to import some Hi8 tapes into FCP-X.
I have a Digital 8 Sony handycam and it is fine with importing all tapes other than my old Hi8 tapes into FCP-X.
Any ideas how to import the Hi8 tapes into FCP-X?

The trial is exactly the same as the paid version.
I have heard that being on a network can affect some aspects of FCP X but I can't remember which!

Capturing a VHS tape into FCP

Hello
I have a short VHS tape I need to get into FCP-6 and onto a DVD. I have my old Canopus ADVC-100 so I know the hardware.
My question is can I record directly to the timeline or do I need to log and capture? Reading the manual says something about 'capture now' to capture the entire tape.
Do I just connect my VHS player to the ADVC FW into the MAc Pro and go into FCP?
Thanks
Allen

Yes, you use the NTSC preset... I think you could also use Apple Pro Res as the compressor... it will look slightly better then NTSC DV... You simply Log and Capture... as you mentioned, just hit Capture now then hit Play on your VCR....
I do suggest though not capturing the entire tape in one session. Incase there is a glitch and you waste 45 minutes of recording... divide it into 15 minutes stretches. (I am speaking of experience)...

Geometry not translating into FCP

Hi, all. Just curious if anyone has figured out an FCP-->Color-->FCP round trip workaround scenario that includes Geometry room parameters. I'm striking out.
The media was shot on 16:9 720P/24, and I'm cutting it in (amazingly, in real time--nice work, Apple) with a ProRes HQ 4:3 NTSC sequence. After a round trip, everything else looks great: primary/seconday color settings, pulldown insertion, etc. However, I've done a number of repos and small camera moves in Color, and they disappear back in FCP. Experimenting with the first :30, I've got to say the autofeathering keyframes LOOK GREAT in Color, (very natural, quick and easy to set up, and smooth) but they do not come back in after rendering, no matter what I try.
It says in the manual and on the FCPS 2 site that Geometry room settings get translated into FCP motion parameters. That's not happening. Is this a known bug? FCP's motion control is so clunky, I'd be more likely to do it in After Effects, but that's a pain, since the controls are right here in front of me in Color.
Many thanks.

I realize this is an old thread, but here's the solution:
Just delete the .xml file from your project's container. You'll have to right-click on the project, choose "Show Package Contents", then delete the .xml file that's in there. Actually, maybe move it some place safe, even though it is a clone of the file you actually did use.
Once it's gone, Color is fooled into thinking that you didn't import this form XML, and you're good to go.
You might also have to delete the line in the project's .PDL file that has the <IMPORTFROMFCP> tag, I'm not sure. It was the first thing I tried and it didn't have any effect, but since I never put it back I can't be sure you don't need to do both things.
And I respectfully disagree about doing it there way or the highway. Since FinalTouch 1.x I've been doing all sorts of XML hacks and workarounds to make it do some things MY WAY I still can't get it to 4K with this DALSA footage I'm on right now, though
Tyler Hawes, DI Colorist
Liquid DI
www.liquidcompanies.com

Importing FCE files into FCP

Hi,
I have some old FCE projects. My question is whether I am import the FCE project into FCP?

I think you can just do a file > open and open them right up. you might get a warning that you are opening an older version and of course once saving you probably won't be able to open them in FCE again... so I would make a duplicate first then open away.

Importing .m4v file into FCP

I have a .m4v file that was created by HandBreak. This file was of a live concert. I wanted to edit it into individual songs so I needed to get it into FCP. I looked around and found Wondershare Video Converter Pro. I converted it to a Quicktime. The file size was dramatic. Original file = 4.06GB. The .mov ended up at 550MB. The problem is the .mov quality was pretty bad.
Is there a better way to do this? Can I use a different format that FCP can import? I care more about quality than size, at least while I'm editing in FCP.
Thanks

Nick Holmes wrote:
Did you copy the contents of the VIDEO_TS folder to the computer's hard drive as per the tutorial?
Yes, I did that.
Your internal drive rotates at 7200 RPM whereas a DVD is around 850 RPM. That makes quite a difference. Even a five year old G4 should convert a 1GB .vob in around 20 minutes.
Or are you doing something else that needs lots of CPU resources at the same time?
No, nothing else is going on. I just looked and the VTS011.VOB file is only 1.07GB in size. Any other suggestions? I have it copied to my internal drive. I have an iMac I got new last November. Not that old... I am now at 53% completed. I started the conversion at 10:30 AM, it is now 5:00 PM. That's 6 1/2 hours to convert a 1Gb file. Seems odd...
Thanks

CONVERTING and IMPORTING .VOB files into FCP?

Hi.
I made a dvd of an old vhs tape of mine using a Sony consumer vhs-->dvd component.
Haven't had any trouble in the past using MPEG streamclip to convert .vob files and import into fcp (from dvd's NOT made on this particular machine) --but for some reason, this dvd doesn't seem to contain those files.
The icon of the dvd appears as a folder on my desktop with a small red circle on it.
The dvd plays fine on my G5, but the folder appears to be empty when opened.
I'm stumped.
Anyone?

Buy or hire one of these: http://www.grassvalley.com/products/advcprofessionalfamily then you can capture the tape directly into FCP as a QuickTime .mov that uses the DV codec.
Don't forget to switch the *Device Control* setting in Log & Capture to *Non-Controllable Device* first.

Aspect ratio importing DV into FCP X

Can someone explain how DV format works (I think I understand this) and how importing DV into FCP X works (I definitely don't understand).
I have some old PAL DV files which I want to compress using Compressor, with the aim of later importing them into FCP X. I can compress them in one of two ways: compressing to 720x576 with the standard PAL aspect ratio, so they appear (eg. in QuickTime Player) as 768x576. Let's call this 'Old Style'. Or, I can compress them so they have square pixels, and genuinely are at 768x576. ('Square pixels').
Both display using QTP7 as 768x576, but Square Pixels is compressed slightly so there is more of the picture visible at left and right of the screen. Objects in the image are therefore thinner left-to-right than in Old Style.
Now, if I import them into FCP X, in the event browser Square Pixels still displays as 768x576 and looks just as it does in QTP. But Old Style is now wider than 768x576 and has the extra bit of picture that Square Pixels displays. So they're both displaying the same image, but Square Pixels has it compressed to fit into 768x576, whereas Old Style has it wider, and consequently people are fatter left-to-right.
When I import these events into a project, things change again. Old Style appears exactly as it does in the event browser (ie. about 786x576, with the whole image displayed). Square Pixels stretches the image north-south, and this means that part of the top and bottom of the image are chopped off.
What is going on? Is there a website which can explain this clearly? Which is the better format for me to compress my video into?
Cheers,
Martin S Taylor
FCP X 10.1.2
Compressor 4.1.2

I don't understand your question?
DV footage on DV or mini-DV tapes is already digitised . . . . hence the name DV or Digital Video.
If you have a DV camera or deck you can plug it into your Mac via FireWire and import the footage straight into FCP X.

JVC old camcorder into FCP X

Similar Messages

Maybe you are looking for