JVM 1.4.x IE 6 CPU utilization 100% when issue window.print

I am using JVM 1.4.2_04, IE 6 and WinXP Pro.
When visiting internet application having applet initialized, and click the PRINT link (window.print()), suppose the print dialog box will be shown, however, the CPU utilization draw up to 100% and the dialog cannot be shown over 10 minutes.
I had tried with 1.4.1_x, the same result found.
If using 1.3.1_x on the same application, no problem found, can anyone help.

case solved, which is due to the bug_id 4942346

Similar Messages

ASA 5545 NIPS CPU utilization 100%

Hi,
We are having two pair of NIPS SSP and working in Active and standby mode.
All four Devices (ASA 5545 and ASA 5525 SSP IPS) showing CPU utilization 100% on both active and standby devices.
Memory usage is also showing very highly utilized.
Kindly help me resovle this issue.
Regards,
Dheeraj

Hi Dheeraj,
I don't think this is an issue. CPU 100% utilization is reported on every IPS (appliance or ASA software module) and it should be normal.
If you want to see if your device is getting more traffic than it can process, you should look at inspection load.
I hope this will help and it would be nice if someone from Cisco team could reply to this.

Performance degrading CPU utilization 100%

Hello,
RHEL 4
Oracle 10.2.0.4
Attached to a DAS (partition is 91% full) RAID 5
Over the past few weeks my production database performance has majorly degraded. I have not made any application, OS, or database changes (I was on vacation!). I have started troubleshooting, but need some more tips as to what else I can check.
My users run a query against the database, and for a table with only 40,000 rows, it will take about 2 minutes before the results return. For a table with 12 million records, it takes about 10 minutes or more for the query to complete. If I run a script that counts/displays a total record count for each table in the database as well as a total count of all records in the database (~15,000,000 records total), the script either takes about 45 minutes to complete or sometimes it just never completes. The Linux partition on my DAS is currently 91% full. I do not have Flashback or auditing enabled.
These are some things I tried/observed:
I shut down all applications/servers/connections to the database and then restarted the database. After starting the database, I monitored the DAS interface, and the CPU utilization spiked to 100% and never goes down, even with no users/application trying to connect to the database. The alert.log file contains these errors:
ORA-00603: ORACLE server session terminated by fatal error
ORA-00600: internal error code arguments: [ttcdrv-recursivecall]
ORA-03135: connection lost contact
ORA-06512: at "CTXSYS.SYNCRN", line 1
The database still starts, but the performance is bad. From the error above and after checking performance in EM, I see there are a lot of sync index jobs running by each of the schemas and the db sequential file read is high. There is a job to resync the indexes every 5 minutes. I am going to try disabling these jobs tihs afternoon to see what happens with the CPU utilization. If it helps, I will try adjusting the job from running every 5 minutes to something like every 30 minutes. Is there a way to defrag the CONTEXT indexes? REBUILD?
I'm not sure if I am running down the right path or not. Does anyone have any other suggestions as to what I can check? My SGA_TARGET is currently set to 880M and the SGA_MAX_SIZE is 2032M. Would it also help for me to increase the SGA_TARGET to the SGA_MAX_SIZE; thus increasing the amount of space allocated to the buffer cache? I have ASMM enabled and currently this is what is allocated:
Shared Pool = 18.2%
Buffer Cache = 61.8%
Large Pool = 16.4%
Java Pool = 1.8%
Other = 1.8%
I also ran ADDM and these were the results of my Performance Analysis:
34.7% The throughput of the I/O subsystem was significantly lower than expected (when I clicked on this it said to either implement ASM or stripe using SAME methodology...we are already using RAID5)
31% SQL statements consuming significant database time were found (I cannot make application code changes, and my database consists entirely of INSERT statements...there are never any deletes or updates. I see that the updates that are being made were by the index resyncing job to the various DR$ tables)
18% Individual database segments responsible for significant user I/O wait were found
15.9% Individual SQL statements responsible for significant user I/O wait were found
8.4% PL/SQL execution consumed significant database time
I also recently ran a SHRINK on all possible tablespace as recommended in EM, but that did not seem to help either.
Please let me know if I can provide any other pertinent information to solve the poor I/O problem. I am leaning toward thinking it has to do with the index sync job stepping on itself...the job cannot complete in 5 minutes before it tries to kick off again...but I could be completely wrong! What else can I check to figure out why I have 100% CPU utilization, with no users/applications connected? Thank you!
Mimi
Edited by: Mimi Miami on Jul 25, 2009 10:22 AM

Tables/Indexes last analyzed today.
I figured out that it was the Oracle Text indexes synching to frequently that was causing the problem. I disabled all the jobs that kicked off those indexes and my CPU utilization dropped to almost 0%. I will work on tuning the interval/re-enabling the indexes for my dynamic datasources.
Thank you for everyone's suggestions!
Mimi

Monitoring IP Gateway Activity hangs workstation and rise Servers CPU utilization 100%

Hi..
I have nw5.1 sp6 and BM 3.7 sp3 with last patches..installed with C.
Johnson's BM Book.
used services/proxies HTTP, FTP ,Generic TCP and Socks
Only one acces rule with indexed logging for denyed URL-s..
all works well except socks gateway sometimes. Sometimes, sometimes with no
reason, if you look real time activity of IP Gateway
(Nwadmin-tools-Bordermanager-IP Gateway) workstation hangs and server CPU
utilization rise to 100%. and only way reboot workstation and reload
proxy.nlm on server..
By the way the same is for Proxy cache monitor...
is any ideas ?
Thanks,
Lab.

May be.. Actually, i have pervasive upgraded to sp4 + postfixes
for other reasons and have some bti.cfg settings changed..
Thanks, i will look in this way..
Lab
BTW, what does -c parameter mean?
> I suspect your btrieve database hasn't been loaded with the optimal
> parameters.
> When loading btrieve make sure that you use the -u=1 -c parameters.
> >
>
>
> --
> Cat
> NSC Volunteer Sysop

CPU usage 100% when WLS 10.3.3 is idle on OS X 10.6.4 (Snow Leopard)

I've installed WLS 10.3.3 on OS X 10.6.4 and executed using the instructions in the README (including setting the MEM_ARGS).
Upon startup, the CPU usage spikes to ( then stays ) around *104%* ( dual-core CPU ); this, of course cripples the computer to where all running applications suffer. Attempting to access the console, brings the system to it's knees. This happens even if it is the only (non-system) application running.
We need to be able to run WLS on our local development machines (MacBook Pros from 2007-present).
We are currently running OAS (OC4J) on the machines with out any issues (CPU usage at OAS idle = ~1.1%).
Are there any WLS performance settings that can be adjusted to alleviate the CPU utilization issue?
My System Info:
Model Name:     MacBook Pro
Model Identifier:     MacBookPro4,1
Processor Name:     Intel Core 2 Duo
Processor Speed:     2.4 GHz
Number Of Processors:     1
Total Number Of Cores:     2
L2 Cache:     3 MB
Memory:     4 GB
Edited by: user8664206 on Aug 3, 2010 8:54 AM

Thank you!
The key was modifying the "setDomainEnv.sh" file (this file is generated using the domain GUI configuration tool).
I added the following at the top of the script (just below the comments):
JAVA_VENDOR="Sun"
export JAVA_VENDOR
I modified:
SUN_JAVA_HOME=""
export SUN_JAVA_HOME
...to be:
SUN_JAVA_HOME="/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home"
export SUN_JAVA_HOME
Now when I execute the container, it consumes only 0.2% of the CPU.
Thanks again,
Jim

CPU runs 100% when logging with DAQmx using card 6229

Hi!
When I start a logging using DAQmx Analog Input the computer CPU runs 100%. This causes the problem that the computer locks and the subsequent steps in the program are left without computer CPU recourse. After the logging is compleet, 1750 samples/10 channels at 250Hz, the program runs on, but the loggfile is at that point useles.
I have instaled LV 7.1.1 and am using DAQ 7.4.
Anyone that recognizes this problem?
Regards,
Idriz
Idriz "Minnet" Zogaj, M.Sc. Engineering Physics
Memory Profesional
direct: +46 (0) - 734 32 00 10
http://www.zogaj.se

Hello Idriz!
I just wanted to respond here as well so you know that we have read your post on this very forum. Still waiting for an answer from the US and after that I will forward that information to you.
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

CPU hits 100% when I quit iTunes

Whenever I quit iTunes, the it pegs the CPU at 100% for 20 - 30 seconds. I've seen lots of people with CPU-hogging problems during podcast updates and ripping... anybody find an answer for this one?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
Regards.

CPU Utilization 100%

Hi,
I have developed an application to view images from an IP camera. By this I can simualtaneously view images from about 25 cameras. The problem is that the CPU Usage increases as the no of player increases. My Player is JPanel. which continuously paints the images from camera. The method 'paintImage' is called from another thread's run method. This thread is responsible for taking jpeg images from IP camera.
Here is the code for this.
public void paintImage(Image image, int fps) {
     try {
          int width = this.getWidth();
          addToBuffer(image);
          currentImage = image;
          Graphics graphics = this.getGraphics();
          if (isRunning && graphics != null) {
               graphics.drawImage(image, 0, 0, getWidth(), getHeight(), this);
               if(border ==true){
                    graphics.setColor(Color.RED);
          graphics.drawRect(0,0,getWidth()-1, getHeight()-1);
               graphics.setColor(Color.white);
               graphics.setFont(new Font("verdana", Font.ITALIC, 12));
               graphics.drawString("FPS : " + fps, width-60, 13);
               this.fps = fps;
               if (isRandomRecord) {
                    graphics.setColor(new Color(0, 255, 0));
                    graphics.fillArc((getWidth() - 10), 5, 10, 10, 0, 360);
     } catch (Exception e) {
          e.printStackTrace();
Can someone please help me to solve this problem so that the CPU usage can be reduced.

   Yes, this is expected.
Since Web/Business tier databases do not have any guaranteed DTUs/resource limits associated with them, we normalize the percentage values in terms of the amount of resources available to a database in S2 performance level. DTU and other resource (CPU/IO/Log
etc) consumption information in terms of an S2 database level will allow you to normalize the current consumption of your Web/Business databases in terms of new tier databases and see where they fit better for migration as needed. Since Web
and Business databases run in a shared pool (i.e. sharing resources with other customer loads in the same machine), the resource availability can vary based on who else is running on the same machine. If there are not many significant other active loads
on the machine where your database is running, it is possible for you to get significantly more than 100% of an S2 performance level. Similarly, it is possible to see resource availability to fall much lower than 100% for an active database, if there are many
other active workloads are running on the same machine.

Xcode 4.4 cpu utilization 100%

Since upgrading to XCode 4.4, I am seeing it use > 100% CPU. I've taken a sample, most threads appear to be spending almost all their time in mach_msg_trap (partial sample below). Known issue? Other than editing some rather simple C++ code, xcode is downloading and installing libraries, not an activity that I'd expect to spin my fans up to top speed.
Is this a known issue? Is there a workaround?
Sampling process 39159 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling Xcode (pid 39159) every 1 millisecond
Process:         Xcode [39159]
Path:            /Applications/Xcode.app/Contents/MacOS/Xcode
Load Address:    0x101ca9000
Identifier:      com.apple.dt.Xcode
Version:         4.4 (1484)
Build Info:      IDEApplication-1484000000000000~4
Code Type:       X86-64 (Native)
Parent Process: launchd [106]
Date/Time:       2012-07-28 14:42:37.585 +0200
OS Version:      Mac OS X 10.7.4 (11E53)
Report Version: 7
Call graph:
    2121 Thread_804492   DispatchQueue_1: com.apple.main-thread (serial)
    + 2121 ??? (in Xcode) load address 0x101ca9000 + 0x1dc0 [0x101caadc0]
    +   2121 NSApplicationMain (in AppKit) + 867 [0x7fff87516244]
    +     2121 -[NSApplication run] (in AppKit) + 470 [0x7fff8729a071]
    +       2121 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] (in AppKit) + 135 [0x7fff8729d735]
    +         2121 _DPSNextEvent (in AppKit) + 659 [0x7fff8729de31]
    +           2121 BlockUntilNextEventMatchingListInMode (in HIToolbox) + 62 [0x7fff8c12160e]
    +             2121 ReceiveNextEventCommon (in HIToolbox) + 355 [0x7fff8c121781]
    +               2121 RunCurrentEventLoopInMode (in HIToolbox) + 277 [0x7fff8c11a4d3]
    +                 2119 CFRunLoopRunSpecific (in CoreFoundation) + 230 [0x7fff8f6ac486]
    +                 ! 2100 __CFRunLoopRun (in CoreFoundation) + 1204 [0x7fff8f6acc74]
    +                 ! : 2100 __CFRunLoopServiceMachPort (in CoreFoundation) + 188 [0x7fff8f6a450c]
    +                 ! :   2100 mach_msg (in libsystem_kernel.dylib) + 73 [0x7fff8976fd71]
    +                 ! :     2100 mach_msg_trap (in libsystem_kernel.dylib) + 10 [0x7fff8977067a]

I believe the NSLog is a different problem.
NSLog printing of a very large string can cause a beachball with XCode 4.4 eating up a very high percentage of CPU Cycles. (For example see ... http://www.openradar.me/11972490) ... I experience this on my old MacMini running XCode 4.4
I have a new MacBook air and I am seeing the high CPU usage causing my fans to spin up so high that I can hear them on my normally silent machine, but with no beachball. Quitting Xcode and reopening resolves the issue on my MaxBook Air.

CPU reach 100% when saving a large report in pdf format

We have some reports that are fairly large. When we schedule them to save in pdf format, the job server takes all the CPU resources, and makes other servers slow. Is there a way to limit how much CPU the job server can take?

Just give
destype=mail desformat=pdf desname=emailid
in cmd line
Which reports version are you using ?
In 9i you have to specify outgoing mail server in
$OH\report\conf\server_name.conf
in this xml element (uncomment it)
<pluginParam name="mailServer">%MAILSERVER_NAME%</pluginParam>
For more details refer
[     Publishing reports to web - 10G ] (link below)
especially the command line args in appendix
Thanks
Ratheesh
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

CPU hit 100% when installing Solution Manager

During the installation, it hang at phase 34 (Start JAVA Engine) of 43. The description at bottom written :
"Starting SOL/DVEBMGS00 [ABAP:ACTIVE, Java:UNKNOWN]. Elapsed time:9:00 minutes"
When i checked the task manager, the CPU usage was shot up to 100%.
Please advice what can i do?

Which process is using that CPU?
Markus

WebProcess at 50% and CPU at 100% when using Illustrator CS5...

Hello there !
First time at this so I hope I provide every detail needed...
I searched for a similar issue without finding the exact problem elsewhere.
I have a MBP mid-2009 running on OSX 10.7.4 and updated Safari recently to version 6. Everything works perfectly except when I use Illustrator CS5, the WebProcess gets up to 50% in average, my CPU gets owned to a 100% as my fans spins near 6500 rpm in less than 2 minutes...
Any ideas ?
Thanks for your concern !

Hello Idriz!
I just wanted to respond here as well so you know that we have read your post on this very forum. Still waiting for an answer from the US and after that I will forward that information to you.
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

CPU at 100% when starting Premiere Elements 10

Hi,
When I start Premiere Elements 10 the program runs at 100% CPU usage. Even when I haven´t opened a project yet. So it is not caching media or something. On the screenshot below you can see my problem. There is no project open but the task "Adobe Premiere Elements.exe" is running at 100%.
This makes my system very slow and instable.
I have a 2GB Pentium D 3.0 GHz and my harddrives have lots of free space (They are not working very hard when using Premiere).
Can anyone help me with this?
Dimitri

No, it doesn't barely meet the tech requirements (regardless of Adobe's suggested minimums). It is not adequate to work with this program.
With only 2 gigs of RAM, the program is not only idling but also doing a lot of paging. And, if you've got less than 30 gigs of clean, free, defragmented space, it's also struggling with defragmentation.
It's also possible the Organizer is auto-analyzing your drive and if you've got other programs running in the background (like a live defrag program or an intrusive antivirus program like Norton or McAfee) that could be contributing to the problem.

CPU at 100% when flash running on tab in Chrome

A site I have started using has placed their text online; flash player is the reader nd it immediately causes my CPU to jump to 100%. As soon as i switch to another tab the CPU drops to normal, as soon as I flip back it immediately ramps up to 100%. Any help on what I can do? I didnt see any similar threads.

Can you post a link to the particular page?
If it does it on any (or all) of my test machines, it's most likely something in the ActionScript on the page.

NIScope CPU usage 100% when waiting for trigger

Hello, I'm using a NI 5102 DAQ card and want to acquire single bursts. However when the Multi Fetch.vi is waiting for a trigger (and this can be up to a minute) the CPU usage goes up to 100 %. Is there any way to overcome this?
Attachments:
Current_ProjectSWEEP2withoutAgilentNEWScopeWrite_to_FilePOSTED.vi ‏98 KB
ScopeSUB.vi ‏108 KB

Yea, Ive noticed the same thing. The niSope dll in the Fetch.vi grabs 100% CPU if timeout is larger than 1 or 2 seconds.
Has anyone talked to NI about this? The problem is in that dll which is polling the PCI Scope Card. That dll is not giving back any CPU if it waits for more than a second or two.
John Dailing
[email protected]

JVM 1.4.x IE 6 CPU utilization 100% when issue window.print

Similar Messages

Maybe you are looking for