JVM DLL error : faulting module jvm.dll, version 27.6.5.32,

Hi,
I'm running WL in windows server and beasvc.exe is failing with this message.
"Faulting application beasvc.exe, version 1.0.3.9, faulting module jvm.dll, version 27.6.5.32, fault address 0x0001e194"
Any help please?
thanks,
Kam

Similar Messages

Faulting application saflashplayer.exe, version 6.0.21.0, faulting module saflashplayer.exe, version 6.0.21.0,...

I have just recently been getting this error show up in my
'event logs' after looking at event viewer in my admin tools
folder.
Faulting application saflashplayer.exe, version 6.0.21.0,
faulting module saflashplayer.exe, version 6.0.21.0, fault address
0x00032f8b.
The movie eith does not play or plays part and frezes and
sound continues then crashes.
My movie is rather large and is set to stream. it is 36mb
(the movie is fine the movie plays ok, when i play the WMV file.
this is just viewing it on my local files on my pc, not via
the internet.
i have even restarted my pc and redone the whole import
process and created a new file and still it happens.
with the error above does anyone know what could be causing
this to happen?
thanks
Jason

I feel like I heard about a similar issues in win 2003, and cannot remember for the life of me what caused it.
If you're out of options, look through here and see if there's something you haven't tried that may help, and I'll try to find where I saw the error I mentioned, and come back with more info
Let me know if you get anything more turned over on your side

IE Application Error: Faulting Module Flash10v.ocx

I'm running Windows 2003 Server, Enterprise, with Terminal Services and all users connecting via RDP. Have 32-bit IE8 and Adobe Flash Player 10.3.183.5. I'm having problems with one third party website application which requires Flash Player. I receive an iexplore.exe - application error stating "The instruction at "0x08b4288b" referenced memory at "0x0ffcf2e4". The memory could not be read". Under Application in Event Viewer I receive a corresponding Application Error which states "Faulting application iexplore.exe, version 8.0.6001, faulting module Flash10v.ocs, version 10.3.183.5, fault address 0x000b288b". I was having the same problem with the previous version of Flash Player as well, so updating did not solve it. In the past we've had problems with Flash Player updates and this particular website, and were able to solve it by changing the permissions of a few registry keys to allow "everyone" Read permissions for those keys. This method did not work this time, so I'm hoping someone can tell me how to locate the registry entries related to Flash Player so I can modify the permissions.

I'm running Windows 2003 Server, Enterprise, with Terminal Services and all users connecting via RDP. Have 32-bit IE8 and Adobe Flash Player 10.3.183.5. I'm having problems with one third party website application which requires Flash Player. I receive an iexplore.exe - application error stating "The instruction at "0x08b4288b" referenced memory at "0x0ffcf2e4". The memory could not be read". Under Application in Event Viewer I receive a corresponding Application Error which states "Faulting application iexplore.exe, version 8.0.6001, faulting module Flash10v.ocs, version 10.3.183.5, fault address 0x000b288b". I was having the same problem with the previous version of Flash Player as well, so updating did not solve it. In the past we've had problems with Flash Player updates and this particular website, and were able to solve it by changing the permissions of a few registry keys to allow "everyone" Read permissions for those keys. This method did not work this time, so I'm hoping someone can tell me how to locate the registry entries related to Flash Player so I can modify the permissions.

Application Error - Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385

Hi,
we have one Visual C++ application and this application also using few external dlls. while exiting from application, getting following error. This
is happened in Windows 7.
Please help us to resolve this issue.
Log Name:
Application
Source:
Application Error
Date:
28/07/2010 11:44:16 AM
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
CRIWKS12.crillylaw.local
Description:
Faulting application name: WinTest.exe, version: 2.7.1.0, time stamp: 0x4b78d5b8
Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdaae
Exception code: 0x0eedfade
Fault offset: 0x00009617
Faulting process id: 0x10b8
Faulting application start time: 0x01cb2df647dfd847
Faulting application path: C:\Program Files\xxx\xxx\xxx\ WinTest.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: a17377fd-99e9-11df-8941-90fba60d7539
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-28T01:44:16.000000000Z" />
<EventRecordID>3773</EventRecordID>
<Channel>Application</Channel>
<Computer>CRIWKS12.crillylaw.local</Computer>
<Security />
</System>
<EventData>
<Data> WinTest.exe</Data>
<Data>2.7.1.0</Data>
<Data>4b78d5b8</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bdaae</Data>
<Data>0eedfade</Data>
<Data>00009617</Data>
<Data>10b8</Data>
<Data>01cb2df647dfd847</Data>
<Data>C:\Program Files\xxx\xxx\xxx\ WinTest.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>a17377fd-99e9-11df-8941-90fba60d7539</Data>
</EventData>
</Event>
PS. I apologise for not being able to provide the application's name.

Hi Jesse ,
I am pasting the entire module where the code fails:
/// <summary>
/// Pool the job execution status
/// </summary>
private void PoolJobExecutionStatus()
int waitIndex = 0;
while (true)
try
lock (this.lockingObject)
this.ReOpenRegistryConnection();
currentJob = SR.Job.Load(this.currentJobId, this.poolingConnection);
JobStatusEventArgs jobStatusArg = (currentJob.Status == SR.JobStatus.Aborted) ?
new JobStatusEventArgs(currentJob.Name, currentJob.Status, currentJob.ErrorMessage) :
new JobStatusEventArgs(currentJob.Name, currentJob.Status);
this.dispatcher.BeginInvoke(new EventHandler<JobStatusEventArgs>(RaiseUpdateStatus), DispatcherPriority.Normal, new object[] { this, jobStatusArg });
if (currentJob.Status == JobStatus.Aborted || currentJob.Status == JobStatus.Completed)
this.PoolJobThread.Abort();
break;
catch (ThreadAbortException)
catch (ConnectionFailure ex)
TridentErrorHandler.HandleUIException(ex);
// If reconnection fails more than the max reconnection value then exit.
if (this.connectionAttempts >= this.maxConnectionAttempts)
break;
this.connectionAttempts++;
catch (BackendStorageException ex)
TridentErrorHandler.HandleUIException(ex);
// If reconnection fails 5 times then exit.
if (this.connectionAttempts >= this.maxConnectionAttempts)
break;
this.connectionAttempts++;
catch (Exception ex)
TridentErrorHandler.HandleUIException(ex);
break;
try
Thread.Sleep(500);
// If job is in waiting state, every 3 min show the user retry message.
// (waitIndex == 360) Specifes 3 min.
if (currentJob.Status == JobStatus.Waiting && waitIndex == 360)
waitIndex = 0;
JobStatusEventArgs jobStatusArg = new JobStatusEventArgs(this.currentJob.Name, this.currentJob.Status, TridentResourceManager.GetString("JobTerminatedByUserMessage"));
this.dispatcher.BeginInvoke(new EventHandler<JobStatusEventArgs>(RaiseUpdateStatus), DispatcherPriority.Normal, new object[] { this, jobStatusArg });
catch (Exception ex)
TridentErrorHandler.HandleUIException(ex);
waitIndex++;
public void StartDataProductService(Guid jobId, Connection poolConnection)
this.currentJobId = jobId;
this.poolingConnection = poolConnection;
this.ClearTempData();
this.HaltService();
this.PoolJobThread = new Thread(this.PoolJobExecutionStatus);
this.PoolJobThread.Start();
Hope this helps
Regards,
Rahul

Explorer.exe Application Error - Faulting module name: Windows.UI.Xaml.dll

We are having a problem with one of our Windows 2012 R2 Terminal Server. The server keeps maxing out CPU to 100% the only way to resolve the issue is by restarting the guest OS. When I have been trying to troubleshoot the issue. I have noticed the following
error is appearing in the event log. I have tried various research online but have been unable to find a resolution to the issue. Anyone have any ideas?
Faulting application name: explorer.exe, version: 6.3.9600.17415, time stamp: 0x54503a3a
Faulting module name: Windows.UI.Xaml.dll, version: 6.3.9600.17415, time stamp: 0x54504b1a
Exception code: 0xc000027b
Fault offset: 0x0000000000982bea
Faulting process id: 0xd44
Faulting application start time: 0x01d0526d40641d26
Faulting application path: C:\Windows\explorer.exe
Faulting module path: C:\Windows\System32\Windows.UI.Xaml.dll
Report Id: 80a05322-be60-11e4-80db-005056bd0cad
Faulting package full name:
Faulting package-relative application ID:

Hi,
Please test the issue in Clean Boot first. For the detailed steps, please refer to the following Microsoft KB article:
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Also seems you should try to uninstall IE and install it again but before that you can run command type:
SFC /SCANNOW and let the system to scan your DLL files and repair them, then reinstall the new IE.
For general reference, windows.UI.xmal.dll can handle several file in background process. For more detail refer
this article.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Mmc is getting crashed with error Faulting module name: KERNELBASE.dll on windows server 2012 r2

I am facing issue with BizTalk admin console, getting below error,
i thought it will be due to sql server or WMI so restarted sql services as well WMIS services but no luck. restarted Distributed transaction services as well as restarted machine but it did not solve.
also when i tried with other MMC's i am getting below error in event viewer,
Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x52158765
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532943a3
Exception code: 0xe0434352
Fault offset: 0x00011d4d
Faulting process id: 0x215c
Faulting application start time: 0x01d004a6e0c31506
Faulting application path: C:\windows\SysWOW64\mmc.exe
Faulting module path: C:\windows\SYSTEM32\KERNELBASE.dll
Report Id: 3d994be7-709f-11e4-80ee-00505689506c
Faulting package full name:
Faulting package-relative application ID:
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.OnThreadException(System.Object,
System.Threading.ThreadExceptionEventArgs)
at System.Windows.Forms.Application+ThreadContext.OnThreadException(System.Exception)
at System.Windows.Forms.Control.WndProcException(System.Exception)
at System.Windows.Forms.Control+ControlNativeWindow.OnThreadException(System.Exception)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.IntDestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.UnsafeNativeMethods.DestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.NativeWindow.DestroyHandle()
at System.Windows.Forms.Control.DestroyHandle()
at System.Windows.Forms.Control.Dispose(Boolean)
at Microsoft.BizTalk.Administration.SnapIn.Forms.GroupHub.OperationsCtrl.Dispose(Boolean)
at System.ComponentModel.Component.Dispose()
at Microsoft.ManagementConsole.FormView.InternalShutdown()
at Microsoft.ManagementConsole.View.HandleShutdownRequest(Microsoft.ManagementConsole.Internal.IRequestStatus)
at Microsoft.ManagementConsole.View.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(Microsoft.ManagementConsole.Internal.IMessageClient,
Microsoft.ManagementConsole.Internal.RequestInfo)
at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(Microsoft.ManagementConsole.Executive.SimpleOperationCallback)
at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature,
Boolean)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
at System.Reflection.RuntimeMethodInfo.UnsafeInvoke(System.Object, System.Reflection.BindingFlags,
System.Reflection.Binder, System.Object[], System.Globalization.CultureInfo)
at System.Delegate.DynamicInvokeImpl(System.Object[])
at Microsoft.ManagementConsole.Executive.DelegateMessage.OnExecute()
at Microsoft.ManagementConsole.Executive.Message.Execute()
at Microsoft.ManagementConsole.Executive.SnapInThread.DispatchPendingSnapInMessages()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnDataReadyAsync(System.Object, System.EventArgs)
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.WndProc(System.Windows.Forms.Message
ByRef)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr,
Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application.Run()
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ThreadHelper.ThreadStart_Context(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback,
System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback,
System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback,
System.Object)
at System.Threading.ThreadHelper.ThreadStart()
does any one face similar issue if yes can you please help me to solve this?
Regards,
Amit
Regards, Amit More

If its only this MMC might try them over here.
https://social.msdn.microsoft.com/Forums/en-US/home?forum=biztalkgeneral
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Directory server 5.1 application error - faulting module libslapd.dll

we are running directory server 5.1 (build 2001.326.2045) on windows nt, with multi-master replication on two servers. one server went down. there are no clues as to why in the access or error logs.
the windows event viewer shows an application error. the faulting application is slapd.exe, faulting module is libslapd.dll, and fault address is 0x0003edb0
any help would be appreciated. any questions please ask. thanks!
Edited by: amlefty on Aug 26, 2009 8:12 PM

we are running directory server 5.1 (build 2001.326.2045) on windows nt, with multi-master replication on two servers. one server went down. there are no clues as to why in the access or error logs.
the windows event viewer shows an application error. the faulting application is slapd.exe, faulting module is libslapd.dll, and fault address is 0x0003edb0
any help would be appreciated. any questions please ask. thanks!
Edited by: amlefty on Aug 26, 2009 8:12 PM

Event 1000,Application Error Faulting module name: KERNELBASE.dll

I develop one tool using C#.But it will stop working intermittently.The failure information is as below.I don't know what's wrong with it.
Faulting application name: TVSUAuto.exe, version: 1.0.5294.41796, time stamp: 0x53b25f89
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16384, time stamp: 0x5215fa76
Exception code: 0xe0434352
Fault offset: 0x0000000000008384
Faulting process id: 0x8d4
Faulting application start time: 0x01cf96029eff97c7
Faulting application path: C:\TVSUAuto.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 0503be2e-01f7-11e4-825d-5c514f0bf2b5

Hi，
That exception code indicates a .NET exception has been thrown and was not handled. You probably want to add some exception handling and logging code to your application so you get an idea about what happens. Otherwise you'll need to post your codes to oneDrive
so that we can test it.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Faulting application Photoshop.exe, version 9.0.2.0, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001bd02

Hi,
I have Photoshop CS2 9.0 version installed on my PC with patch 9.02. I have a VB application which runs certain action files on EPS/TIF images using Photoshop typelibrary.tlb.The issue is that the VB application hangs when Photoshop crashes with the following error:
"Faulting application Photoshop.exe, version 9.0.2.0, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001bd02"
I also get several other errors when i call Photoshop in my VB application. Those are as mentioned below:
1. The referenced memory could not be read.
2. The remote server machine does not exist or not available.
There is no particular pattern for above mentioned errors. I could not find any help in any of the forums.
I have attached the screenshot of these errors.
Pls advice.
Thanks in advance,
Shobha Patil

I to have been getting this error, randomly when I exit the program. Not sure what to make of it google has come up empty for me.

NQSServer.exe, version 10.1.3.4, faulting module NQSCache.dll

I am getting the following errors. BI servers crashes periodically with the following error.
Reporting queued error: faulting application NQSServer.exe, version 10.1.3.4, faulting module NQSCache.dll, version 10.1.3.4, fault address 0x00016b43
Running OBIEE V10.1.3.4 on Windows 2k3 sp2 BI server seperate from Presentation server.
Any help would be greatly appreciated.
Edited by: user2242011 on Jun 1, 2009 8:42 AM
Opened a SR with Oracle.
There is no load on this system. I am working to convert from 7.8.4 to 10 G. All else seems successful except several reports hosted on SQL server and issues with queries.
Thanks for the responses btw...
I will let you know if a solution is identified.
Edited by: user2242011 on Jun 1, 2009 8:42 AM

rnm1978 wrote:
Turribeach wrote:
You may want to try to migrate to a Unix platform which may help avoid the crash.Are there known issues with the stability of OBIEE on Windows then?Not in particular but most issues I heard of are platform related, so you might be able to work around it by changing platforms. We found a BI Server crash issue last year related to LDAP resolution in Linux and we are still waiting for a patch from Oracle Support. So in my experience you have very little chances on getting a fix in reasonable time.

Faulting module name: cslibu-3-0.dll, version: 13.0.1.220

We are using a VB.NET application developed in .NET Framework 4.0 in conjunction with Crystal 2011 runtime SP2 downloaded from the link below:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0_1.zip
Every so often, our application crashes and the following error is logged in the Event Viewer:
6:43:58 #1000 Application Error
Faulting module name: cslibu-3-0.dll, version: 13.0.1.220, time stamp: 0x4d6fe1eb
Exception code: 0xc0000005
Fault offset: 0x000a08f9
Faulting process id: 0x1278
Faulting application start time: 0x01cce1201c08f401
Faulting module path: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\cslibu-3-0.dll
Are there any other logs we can check to determine the cause of this error or has anyone seen anything like this before? There is no pattern that we can determine. Any help would be greatly appreciated.

Please note;
In your original post you say (bolding inserted by me):
We are using a VB.NET application developed in .NET Framework 4.0 in conjunction with Crystal 2011 runtime SP2 downloaded from the link below:
http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0_1.zip
Then note:
In my reply I made it clear that you are not on SP2, you are on SP1, thus the 13_0_1. above. The sticky thread has links to SP2 install as well as runtimes. Until you tell me that you are actually working with SP2 files (please supply the version of the crpe32.dll) there is no point going any further.
- Ludek

Release 4.2(1) Build 15 Patch 4 - faulting module SchemeLayer.dll

Hi All,
For the last few day's I am getting the following error on one of my acs servers.
"Reporting queued error: faulting application CSAdmin.exe, version 0.0.0.0, faulting module SchemeLayer.dll, version 0.0.0.0, fault address 0x0002c370"
It running on windows 2008 32 bit - dedicated server. The anti-virus is set to exclude this directory.
Form a last search it looks like it might be one of the Microsoft patches causing this. - Does anyone know what patch this might be.
I don't have this issue on my other 3 servers running the same setup / patch levels..

Hi Martin,
Try upgrading to latest ACS patch. If that did not resolve the problem try uninstall then install ACS + patch (take abackup before uninstall and restore after).
If you still experience a problem I think you may need to contact cisco for that. Developers may be able to identify what is exactly going on and narrow down the cause of this until they find the windows patch/process that is causing this.
btw, have you tried reloading the machine? or turn off/on the ACS service?
HTH,
Amjad
Rating useful replies is more useful than saying "Thank you"

Faulting module orageneric11.dll

OS Version: Windows Server 2008.
The oracle client is version 11.2.0.1.
On running my .Net application with Oracle database, it throws error:
faulting module orageneric11.dll, version 11.2.0.1, time stamp 0x4bb5eb36, exception code 0xc0000005, fault offset 0x000fa85d, process id 0x68a0, application start time 0x01cb74dbfd95fcf7.
I've googled it as well but not much information is available related to this. I do not belive this is a corrupted installation of the Oracle client as it would be affecting 40 users logging onto this citrix server. Our monitoring solution has only picked up one occurrence of this error. Please guide me to resolve this.

I also got runtime errors from orageneric11.dll
Work envirenment: Microsoft Visual Studio 2010 in Window 7
Language: C/C++/MFC
Oracle client: C:\oracle11\product\11.2.0\client_1\oci
ATL interface: otlv4.h
Runtime exception: Stack location orageneric11.DLL!03a86eb5()
Edited by: user878158 on May 2, 2012 6:09 AM

Faulting module cvirte.dll

I have a vb.net desktop app which makes call to a dll developed in LabWindows/CVI. I have version 9.0 cvi runtime engine installed. The CVI dll is actually developed by another company I am working on this project with. The crashing is not consistent but it most often ends up with an error "faulting module cvirte.dll" The problem is that it will run fine sometimes for a couple of hours making the same function calls then error.
The exception in this case is
Exception Code: 0xC0000005
Exception Information: The thread tried to read from or write to a virtual address for which it does not have the appropriate access.
What I do not understand is why it will make the same calls for a long period of time then all of sudden crash. Since it is so inconstent it's hard to explain this to the CVI developer since with his CVI only app it works.
Since I have version 9 of the CVI engine installed are there any issues if the actually dll is developed in a prior CVI version? I'm waiting for a response from the developer on this issue.
Any ideas on tracking down this issue would be helpful?
Darrell
Solved!
Go to Solution.

Hi Darrell,
The CVI Runtime Engine is backwards compatible so version 9.0 should work with DLL's built in an older version. However, it might still be helpful to know the exact version AND build of the runtime engine that you are using.
Also, there should be some useful information in the Windows Event Viewer that will help us determine what is going on. Right-click on My Computer, and select Manage. In the Computer Management window, expand Computer Management»System Tools»Event Viewer. If you are on Windows XP, select Application. If you are on Window Vista/7, select Windows Logs»Application. There should be an error listed here that corresponds to your application. If you cause the app to crash immediately before looking at the log, then your app should be the most recent error.
You already sent us the faulting module name and the offset, but any additional information, more specifically, exactly what your application is doing when it crashes would be helpful. If you could send all the details from that log, that will help us in resolving this issue.
Raj
National Instruments
Applications Engineer

Faulting application ons.exe, version 0.0.0.0, faulting module ons.exe, ver

Hi All,
I have made a 11.1.0.7 RAC setup on Windows x86-64 Machines. When we start all services using crsctl. ONS in second node starts and after some time stops. When we check in event viewer
I am getting error Faulting application ons.exe, version 0.0.0.0, faulting module ons.exe, version 0.0.0.0, fault address 0x0000000000006039.
Then after this if I use onsctl also I won't be able to start the service. Please let me know how will I rectify this error.
I am performing single node to RAC migration using rconfig. Will ONS not running in second node affect rconfig?
Thanks,
Vikas

You can try changing the the ONS port and start again
srvctl stop nodeapps -n dbsrv2
racgons remove_config dbsrv2:6251
racgons add_config dbsrv2:2200
srvctl start nodeapps -n dbsrv2
by following the Metalin doc 754619.1
Regards,
Sd

JVM DLL error : faulting module jvm.dll, version 27.6.5.32,

Similar Messages

Maybe you are looking for