JVM Error 547 - Can't load OS

I have a Blackberry 8120 and it keeps getting the JVM Error 547 with the only option to reset. I tried loading a fresh install of the OS but it get's to the point of loading the first .cod file and it resets itself. I've also tried using just the app loader and not the Desktop Manager but get the same problem. I've tried downgrading the OS but get the same problem. I've also tried a custom app called "BBSAK" but I get the same problem.
Help! I've searched the net and tried a bunch of things but nothing seems to work! Is the blackberry fried?

Turns out it was the ribbon.

Similar Messages

  • JVM Error 547 - Flash Write Failed

    Hi, i got the 547 error after a long way of many other errors, it start by installing a new app using the stupid DM and my BB restart after the installation and i got 507 error, which mean no software, so i doubt it and tried to pull the battery, sim card and SD, wait for some time, return the battery, and 561 error was there, tried again and nothing
    after search on crackberry and blackberry forums, talking about JL and BBSAK, used both to wipe and re-install the OS again,
    of course i remove the vendor.xml from common files and user "document and settings" folders
    during the installation it load until the net_rim_cldc.cod and restart on its own, and the loader give an error not able to connect again, so i wait until my phone restart with error 507 and click on retry, it stupidly erase every thing again instead of continue from the stop point and it reach the same point and restart, so i fall in a loop
    i tried to delay the net_rim_cldc.cod to the end by changing the Platform.alx, and i tried to cancel this file from Platform.alx and it stuck with the truetype font.cod
    i remove this OS and i tried to download from a different service provider, "again of course i remove the two files for vendor.xml" but no use
    then i used the BBSAK to add manually all the basic files which is 220 modules, and i left the net_rim_cldc.cod to the end, suddenly my phone try to start and keep restarting every 2 minutes, and after several attempts is give me the JVM Error 547 "flash write failed"
    no i cannot connect to BBSAK, the only way is to connect to the loader without battery and wait until it finish erasing then i can connect to JL to wipe or BBSAK
    but then what?? i will end up between BB apploader which cannot finish the installation and BBSAK which can put the 220 files in 220 steps and the phone will not load
    now, any BB genius can help??

    Hi maytik and welcome to the BlackBerry Support Community Forums!
    Take a look at this article as it should help get you back up and running again:
    KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
    Hopefully that helps!
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • BB- pearl 8100 - JVM error 547

    Hi,
    I have Blackberry 8100 pearl model, it is giving me following error message ( even after hard restart, this msg appears  as soon as i insert the battery):
    JVM ERROR 547
    flash write failed: p=827a0000,s=4.
    I downloaded the version 4.2.2 desktop manager from the below link:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    After installing the new DTM ver 4.2.2, I performed the points mentioned in this link
     http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB10144&sliceId=SAL_Pub...
    But when i try this , it fails in step 4, that is, I am not able to see any applications listed. It is displaying this message:
     " The BlackBerry desktop software does not have BlackBerry Device software for the device that you have connected to the computer. Contact your wireless service provider or system administrator."
    I have not taken any back up of my phone, so i dont want to loose my data esp the contact list and messages. Earlier I had version 4.2.0.10 deskop manager now even after upgrading it to 4.2.2 it didnt help .
    I also tried selecting secure mode and reset but it didnt help.
    Please help me to recover. I shall be extremely thankfull.
    PS:  I am new to this forum, not sure If I am posting at right place, please redirect me to the correct thread if I am wrong.

    Hello jamin
    The first thing here is that your data is most likely already lost
    Second, have you downloaded your device software?  The device software is different from the
    Desktop Manager software.
    If you have not downloaded your device software you will need to do this and
    install it on the computer.  I suspect
    this is the reason you are getting  " The BlackBerry desktop software
    does not have BlackBerry Device software for the device that you have connected
    to the computer. Contact your wireless service provider or system
    administrator."
    To get the device software you will need to go back to the carrier site and
    download it. 
    If you tell me who your carrier is I can get you the download link.
    Once you have the device software you are going to want to follow the below
    KB article
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB11320&slic...
    Hope to hear from you soon!
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • HT4623 Please help I I have updated pc win 8, update itunes and i can open and access all in icould but my reminders will not load error message can't load reminders

    I can not open my reminders in icloud, error message can't load reminders.  Have hp win 8 and all has been fine until today for over a year. win updates are done and itune updates done, what should I do?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

    When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

  • ERROR: pif: can't load 'registry.sl'

    Hi all,
    I am trying to have a oracle server with tux 9.0 when I try to boot the server it throws a error and TMS_ORA fails to boot up and so the servers too.
    There was no errors when I was building TMS_ORA and when I try to boot I see some errors in the ULOG and the TMS_ORA and by servers failed to boot.
    The error I got in ULOG is -
    125510.lchp2!TMS_ORA.19078.1.0: GP_CAT:1345: ERROR: pif: can't load 'registry.sl
    125510.lchp2!TMS_ORA.19078.1.0: LIBSEC_CAT:22: ERROR: Unable to realize the ec
    sec_map_proof interface implementation native/security/map_proof. Error code (-5
    000)
    125510.lchp2!TMS_ORA.19078.1.0: LIBTUX_CAT:6275: ERROR: Unable to initialize pub
    lic key subsystem (-3003)
    125510.lchp2!TMS_ORA.19078.1.0: LIBTUX_CAT:248: ERROR: System init function fail
    ed, Uunixerr =
    125510.lchp2!TMS_ORA.19078.1.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    125510.lchp2!TMS_ORA.19078.1.0: LIBTUX_CAT:6207: WARN: Destruction of public-key
    subsystem failed
    125510.lchp2!tmboot.19064.1.-2: CMDTUX_CAT:825: ERROR: Process TMS_ORA at tma81
    failed with /T tperrno (TPENOENT - no entry found)
    Please help me in fixing this error.
    Thanks in advance.
    Regards,
    Jerry

    The -5000 error code for LIBSEC_CAT:22 indicates that the system could not
    find the dynamic library registry.sl. You should verify that SHLIB_PATH,
    LD_LIBRARY_PATH, and TUXDIR are correctly set, that $TUXDIR/lib/registry.sl
    exists, and that TMS_ORA was built using the buildtms command and not by
    manually specifying a list of Tuxedo and Oracle libraries.
    <caring friend> wrote in message news:[email protected]..
    Hi all,
    I am trying to have a oracle server with tux 9.0 when I try to boot theserver it throws a error and TMS_ORA fails to boot up and so the servers
    too.
    >
    There was no errors when I was building TMS_ORA and when I try to boot Isee some errors in the ULOG and the TMS_ORA and by servers failed to boot.
    >
    The error I got in ULOG is -
    125510.lchp2!TMS_ORA.19078.1.0: GP_CAT:1345: ERROR: pif: can't load'registry.sl
    125510.lchp2!TMS_ORA.19078.1.0: LIBSEC_CAT:22: ERROR: Unable to realizethe ec
    sec_map_proof interface implementation native/security/map_proof. Errorcode (-5
    000)
    125510.lchp2!TMS_ORA.19078.1.0: LIBTUX_CAT:6275: ERROR: Unable toinitialize pub
    lic key subsystem (-3003)
    125510.lchp2!TMS_ORA.19078.1.0: LIBTUX_CAT:248: ERROR: System initfunction fail
    ed, Uunixerr =
    125510.lchp2!TMS_ORA.19078.1.0: LIBTUX_CAT:268: ERROR: Failed to stopserving
    125510.lchp2!TMS_ORA.19078.1.0: LIBTUX_CAT:6207: WARN: Destruction ofpublic-key
    subsystem failed
    125510.lchp2!tmboot.19064.1.-2: CMDTUX_CAT:825: ERROR: Process TMS_ORA attma81
    failed with /T tperrno (TPENOENT - no entry found)
    Please help me in fixing this error.
    Thanks in advance.
    Regards,
    Jerry

  • Jvm error 547

    Good morning, I have a blackberry pearl and on the screen has appeared the following message "JVM Error 547 flashes write failed Scroll for available commands." with under different options among which Continuous, Reset, Attach Debugger, Breakpoint, Catfail, Delete Fixups, Delete Modules, Delete Persistent Objects, Dump Logged Stack Traces...
    What must I do?
    Thanks

    Hi there!
    You've posted this three times...that is not encouraged as it takes away from other who need help while we spend time duplicating (or triplicating)  efforts for you. Please choose one of your threads to work in and mark the others as solved.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TS3376 I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone.  There was a problem loading the application."  please help as we are trying to locate an ipod with pics of a no deceased loved

    I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone.  There was a problem loading the application."  please help as we are trying to locate an ipod with pics of a no deceased loved one.

    Had the same problem and the same message --  was suddenly unable to access icloud apps on my pc, also using Windows 7 and Internet Explorer. After several days of pulling my hair out, decided to try a different browser and was able to get in by using Firefox instead of Internet Explorer.  Hope this helps. 

  • Tux 9.0 GP_CAT:1345: ERROR: pif: can't load 'registry.sl' on HP-UX PA-RISC

    I don't know how to fix this problem.
    Can you help me?
    Tuxedo9.0
    HP-UX PA-RISC 32bit

    I'm sure that all the enviroiments were set.
    tux.env:
    TUXDIR=/home/tux/tuxedo9.0; export TUXDIR
    PATH=$TUXDIR/bin:$PATH; export PATH
    COBCPY=:$TUXDIR/cobinclude; export COBCPY
    COBOPT="-C ANS85 -C ALIGN=8 -C NOIBMCOMP -C TRUNC=ANSI -C OSEXT=cbl"; export COB
    OPT
    SHLIB_PATH=$TUXDIR/lib:$SHLIB_PATH; export SHLIB_PATH
    LIBPATH=$TUXDIR/lib:$LIBPATH; export LIBPATH
    LD_LIBRARY_PATH=$TUXDIR/lib:$LD_LIBRARY_PATH; export LD_LIBRARY_PATH
    WEBJAVADIR=$TUXDIR/udataobj/webgui/java
    cd /home/tux/tuxedo9.0/samples/atmi/simpapp
    export TUXCONFIG=/home/tux/tuxedo9.0/samples/atmi/simpapp/tuxconfig
    tmloadcf ....
    tmadmin
    tmadmin - Copyright (c) 1996-1999 BEA Systems, Inc.
    Portions * Copyright 1986-1997 RSA Data Security, Inc.
    All Rights Reserved.
    Distributed under license by BEA Systems, Inc.
    Tuxedo is a registered trademark.
    Unresolved symbol: pthread_create (code) from /home/tux/tuxedo9.0/lib/libengine.sl
    TMADMIN_CAT:1607: ERROR: Unable to initialize public key subsystem
    ULOG
    104744.server1!tmadmin.8488.1.-2: 12-02-2005: Tuxedo Version 9.0, 32-bit
    104744.server1!tmadmin.8488.1.-2: GP_CAT:1345: ERROR: pif: can't load 'registry.
    sl'
    104744.server1!tmadmin.8488.1.-2: LIBSEC_CAT:22: ERROR: Unable to realize the _e
    c_sec_map_proof interface implementation native/security/map_proof. Error code (
    -5000)
    104744.server1!tmadmin.8488.1.-2: LIBTUX_CAT:6275: ERROR: Unable to initialize p
    ublic key subsystem (-3003)
    104744.server1!tmadmin.8488.1.-2: LIBTUX_CAT:6204: ERROR: Could not initialize p
    ublic key subsystem

  • Tuxedo 8.1 GP_CAT:1345: ERROR: pif: can't load 'registry.sl' HP-UX PA-RISC

    I have developed an NSM Agent extracting data from Tuxedo, Tuxedo starts fine, but when I run my agent, the ULOG is updated with the following statement:
    GP_CAT:1345: ERROR: pif: can't load 'registry.sl'
    I have checked all the system variables
    APPDIR=/tuxstart/domains/adminTng
    FIELDTBLS32=Usysfl32,tpadm
    FLDTBLDIR32=/opt/bea/tuxedo8.1/udataobj
    LD_LIBRARY_PATH=/opt/bea/tuxedo8.1/lib
    LIBPATH=/opt/bea/tuxedo8.1/lib
    QMCONFIG=/tuxstart/domains/adminTng/QSDEVICE
    SHLIB_PATH=/opt/bea/tuxedo8.1/lib:/usr/lib
    TUXCONFIG=/tuxstart/domains/adminTng/tuxconfig
    TUXDIR=/opt/bea/tuxedo8.1
    ldd /opt/bea/tuxedo8.1/lib/registry.sl
    return
    /home2/beadev/PEG/p/bld/gp/libgp/libengine.sl => /opt/bea/tuxedo8.1/lib/libengine.sl
    /usr/lib/libpthread.1 => /usr/lib/libpthread.1
    Can anybody please assist?
    Thanks

    This problem could be cured by "chatr +s enable binary" option on hp-ux. The
    reason is "+s" option for the linker enable the binary dyanmic library
    searching for dlopen and the library directory is specified by
    LD_LIBRARY_PATH or SHLIB_PATH. buildclient will add the option
    automatically.
    Wayne
    <Dirk Kruger> wrote in message news:[email protected]...
    I used the following command to build my agent:
    gcc -I/opt/bea/tuxedo8.1/include -ocaitux -L/opt/bea/tuxedo8.1/lib -L/opt/CA/UnicenterNSM/atech/factory/lib -D_
    _BIGMSGQUEUE
    _ENABLEDcaitux.c -ltux -lbuft -lfml -lfml32 -lengine -lpthread -lcl -lnsl -lfactor
    y
    >
    ldd <agentname>
    =>
    /usr/lib/libc.2 => /usr/lib/libc.2
    /usr/lib/libdld.2 => /usr/lib/libdld.2
    /usr/lib/libc.2 => /usr/lib/libc.2
    /opt/CA/UnicenterNSM/atech/factory/lib/libfactory.sl =>/opt/CA/UnicenterNSM/atech/factory/lib/libfactory.sl
    /usr/lib/libm.2 => /usr/lib/libm.2
    /usr/lib/libc.2 => /usr/lib/libc.2
    /usr/lib/libpthread.1 => /usr/lib/libpthread.1
    /usr/lib/libnsl.1 => /usr/lib/libnsl.1
    /usr/lib/libxti.2 => /usr/lib/libxti.2
    /usr/lib/libcl.2 => /usr/lib/libcl.2
    /usr/lib/libisamstub.1 => /usr/lib/libisamstub.1
    /usr/lib/libdld.2 => /usr/lib/libdld.2
    /usr/lib/libpthread.1 => /usr/lib/libpthread.1
    /opt/bea/tuxedo8.1/lib/libengine.sl =>/opt/bea/tuxedo8.1/lib/libengine.sl
    /opt/bea/tuxedo8.1/lib/libfml32.sl =>/opt/bea/tuxedo8.1/lib/libfml32.sl
    /home2/beadev/r81/LC/bld/lib/libengine.sl =>/opt/bea/tuxedo8.1/lib/libengine.sl
    /home2/beadev/r81/LC/bld/lib/libgiconv.sl =>/opt/bea/tuxedo8.1/lib/libgiconv.sl
    /home2/beadev/r81/LC/bld/lib/libengine.sl =>/opt/bea/tuxedo8.1/lib/libengine.sl
    /opt/bea/tuxedo8.1/lib/libfml.sl =>/opt/bea/tuxedo8.1/lib/libfml.sl
    /home2/beadev/r81/LC/bld/lib/libengine.sl =>/opt/bea/tuxedo8.1/lib/libengine.sl
    /opt/bea/tuxedo8.1/lib/libbuft.sl =>/opt/bea/tuxedo8.1/lib/libbuft.sl
    /opt/bea/tuxedo8.1/lib/libtux.sl =>/opt/bea/tuxedo8.1/lib/libtux.sl
    /home2/beadev/r81/LC/bld/lib/libusort.sl =>/opt/bea/tuxedo8.1/lib/libusort.sl
    /home2/beadev/PEG/p/bld/lib/libengine.sl =>/opt/bea/tuxedo8.1/lib/libengine.sl
    /home2/beadev/r81/LC/bld/lib/libfml32.sl =>/opt/bea/tuxedo8.1/lib/libfml32.sl
    /home2/beadev/r81/LC/bld/lib/libfml.sl =>/opt/bea/tuxedo8.1/lib/libfml.sl
    /home2/beadev/r81/LC/bld/lib/libgiconv.sl =>/opt/bea/tuxedo8.1/lib/libgiconv.sl
    /home2/beadev/r81/LC/bld/lib/libbuft.sl =>/opt/bea/tuxedo8.1/lib/libbuft.sl
    /home2/beadev/r81/LC/bld/lib/libengine.sl =>/opt/bea/tuxedo8.1/lib/libengine.sl
    >
    file <agentname>
    caitux: PA-RISC1.1 shared executable dynamically linked -notstripped
    >
    ldd libengine.sl returns nothing

  • Error -39 can't load tools message from aol

    When the subaccount tries to get mail from aol, and error 39 appears-Can't load tools. If main user loads first, and then we switch names we can get mail. Is there a way to fix this?

    I couldn't restore the Mail folder to the Library folder on my new installation; must be some restriction against restoring Library files. I did however copy over my old Mail folder from the time machine backup over the new installation. I then, like you suggested, copied over the Mail preferences too.
    After that I loaded up Mail and ,after spending 15min importing and rebuilding the index, everything showed up perfectly.
    Thanks for your help Pondini!

  • JVM Error 517 - Can I back up my data?

    My blackberry is stuck in the JVM 517 error loop and I desperately need to make a backup of my organizer data (particularly of my calendar, to do list and notes). Any suggestions on how to accomplish this would be greatly appreciated. I am unable to back up my data using Desktop Manager but I am able to use BBSAK to save all COD files (I have a curve 8310 and I was able to save 270 COD files totaling 26MB) but don’t know if this is helpful or not.  I was also able to retrieve the log of events just before the error loop started and in case this is of any help in solving the problem here it is:
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:10 2010  severity:0 type:2 app:net.rim.ippp data:RXCd   2228
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:11 2010  severity:0 type:2 app:net.rim.ippp data:TXst   821
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:11 2010  severity:0 type:2 app:net.rim.ippp data:TXst   810
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:13 2010  severity:0 type:2 app:net.rim.ippp data:RXCd   1234
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:13 2010  severity:0 type:2 app:net.rim.ippp data:TXst   812
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:13 2010  severity:0 type:2 app:net.rim.ippp data:RXCd   730
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:14 2010  severity:0 type:2 app:net.rim.ippp data:TXst   809
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:15 2010  severity:0 type:2 app:net.rim.ippp data:RXCd   691
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:15 2010  severity:0 type:2 app:net.rim.ippp data:TXst   259
    guid:0x1A77581FBCC4EC23 time: Fri Dec 31 20:58:16 2010  severity:0 type:2 app:net.rim.browser data:Bafd
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:16 2010  severity:0 type:2 app:net.rim.ippp data:RXCd   548
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:17 2010  severity:0 type:2 app:net.rim.ippp data:RXCd   41
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:17 2010  severity:0 type:2 app:net.rim.ippp data:TXst   136
    guid:0x58E77B27EE5F2CFD time: Fri Dec 31 20:58:18 2010  severity:0 type:2 app:net.rim.ippp data:RXCd   41
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 20:59:01 2010  severity:0 type:2 appystem data:VM:+RR RX=7.1M,RF=7.1M,FF=1.1M,OF=46.9K,OS=30.2M,ON=210K,OR=379,FR=13K,TR=142K,RR=28,IS=9.7K RA=11.9M,RS=7.6M,RN=70.5K TA=16.9M,TS=15.5M,TN=94.7K PA=7M,PS=7M,PN=25.7K R0=3.3M,2=15K,3=66.8K,7=49K,8=6K,9=7.9M,10=15K,11=95.4K,12=169.3K,13=110K,15=180.4K
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 20:59:11 2010  severity:0 type:2 appystem data:VM:-RR RX=7.1M,RF=7.3M,FF=1M,OF=46.9K,OS=30.2M,ON=210K,OR=379,FR=13K,TR=142K,RR=28,IS=9.7K RA=11.8M,RS=7.5M,RN=68.9K TA=17.1M,TS=15.6M,TN=96.3K PA=7M,PS=7M,PN=25.7K R0=3.3M,2=15K,3=66.8K,7=49K,8=6K,9=7.7M,10=15K,11=95.4K,12=169.3K,13=110K,15=180.4K
    guid:0xF519C95FCF4EF56E time: Fri Dec 31 21:00:21 2010  severity:0 type:2 appevice Lock Command data:Lhol
    guid:0xBEF92E11214401C3 time: Fri Dec 31 21:00:23 2010  severity:0 type:2 app:UI data:GS+Q2 fbf041b7net.rim.device.apps.internal.security.SecurityApp$SecurityStatusScreen
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:01:01 2010  severity:0 type:2 appystem data:VM:+RR RX=7.2M,RF=7.2M,FF=1M,OF=45.3K,OS=30.4M,ON=211.6K,OR=410,FR=16.9K,TR=148.8K,RR=136,IS=9.7K RA=11.8M,RS=7.6M,RN=70.4K TA=17.1M,TS=15.6M,TN=96.1K PA=7M,PS=7M,PN=25.7K R0=3.3M,2=15K,3=66.8K,7=49K,8=6K,9=7.8M,10=15.1K,11=96.5K,12=169.3K,13=110K,15=180.4K
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:01:08 2010  severity:0 type:2 appystem data:VM:-RR RX=7.2M,RF=7.3M,FF=988.4K,OF=45.3K,OS=30.4M,ON=211.6K,OR=410,FR=16.9K,TR=148.8K,RR=136,IS=9.7K RA=11.7M,RS=7.5M,RN=70.1K TA=17.1M,TS=15.7M,TN=96.4K PA=7M,PS=7M,PN=25.7K R0=3.3M,2=15K,3=66.8K,7=49K,8=6K,9=7.7M,10=15.1K,11=96.5K,12=169.3K,13=110K,15=180.4K
    guid:0xF519C95FCF4EF56E time: Fri Dec 31 21:01:08 2010  severity:0 type:2 appevice Lock Command data:Lhol
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:02:01 2010  severity:0 type:2 appystem data:VM:+RR RX=7.3M,RF=7.3M,FF=988.7K,OF=45.3K,OS=30.4M,ON=211.6K,OR=410,FR=16.9K,TR=148.9K,RR=136,IS=9.7K RA=11.7M,RS=7.6M,RN=70.1K TA=17.1M,TS=15.7M,TN=96.4K PA=7M,PS=7M,PN=25.7K R0=3.3M,2=15K,3=66.8K,7=49K,8=6K,9=7.7M,10=15.1K,11=96.5K,12=169.3K,13=110K,15=180.4K
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:02:11 2010  severity:0 type:2 appystem data:VM:-RR RX=7.3M,RF=7.4M,FF=913.3K,OF=45.3K,OS=30.4M,ON=211.6K,OR=410,FR=16.9K,TR=148.9K,RR=136,IS=9.7K RA=11.7M,RS=7.5M,RN=69.3K TA=17.2M,TS=15.8M,TN=97.2K PA=7M,PS=7M,PN=25.7K R0=3.3M,2=15K,3=66.8K,7=49K,8=6K,9=7.6M,10=15.1K,11=96.5K,12=169.3K,13=110K,15=180.4K
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:03:01 2010  severity:0 type:2 appystem data:VM:+RR RX=7.4M,RF=7.4M,FF=913.1K,OF=45.3K,OS=30.4M,ON=211.6K,OR=410,FR=16.9K,TR=149K,RR=138,IS=9.7K RA=11.7M,RS=7.5M,RN=69.3K TA=17.2M,TS=15.8M,TN=97.2K PA=7M,PS=7M,PN=25.7K R0=3.3M,2=15K,3=66.8K,7=49K,8=6K,9=7.6M,10=15.1K,11=96.5K,12=169.3K,13=110K,15=180.4K
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:03:08 2010  severity:0 type:2 appystem data:VM:-RR RX=7.4M,RF=7.4M,FF=870K,OF=45.3K,OS=30.4M,ON=211.6K,OR=410,FR=16.9K,TR=149K,RR=138,IS=9.7K RA=11.6M,RS=7.4M,RN=69K TA=17.3M,TS=15.8M,TN=97.5K PA=7M,PS=7M,PN=25.7K R0=3.3M,2=15K,3=66.8K,7=49K,8=6K,9=7.6M,10=15.1K,11=96.5K,12=169.3K,13=110K,15=180.4K
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:03:08 2010  severity:0 type:2 appystem data:VM:+GC RX=7.4M,RF=7.4M,FF=870K,OF=45.3K,OS=30.4M,ON=211.6K,OR=410,FR=16.9K,TR=149K,RR=138,IS=9.7K RA=11.6M,RS=7.4M,RN=69K TA=17.3M,TS=15.8M,TN=97.5K PA=7M,PS=7M,PN=25.7K R0=3.3M,2=15K,3=66.8K,7=49K,8=6K,9=7.6M,10=15.1K,11=96.5K,12=169.3K,13=110K,15=180.4K
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:15 2010  severity:0 type:2 appystem data:VM: 300001 gc=1 idle=0 native=NONE
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:15 2010  severity:0 type:2 appystem dataystem Startup
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:15 2010  severity:0 type:2 appystem data:VM:FSNHv=1
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:VM:CVER=4.5.0.110
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: WordToGo(17) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: WordToGoResource(35) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: WordToGoResource__en(38) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: SlideshowToGo(41) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: SlideshowToGoResource(56) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: SlideshowToGoResource__en(59) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: DocsToGoCommon(62) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: DocsToGoCommonResource(95) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: DocsToGoCommonResource__en(98) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: WordToGoResource__es(101) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: SlideshowToGoResource__es(104) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: DocsToGoCommonResource__es(107) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: SecurIDLib(418) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:19 2010  severity:0 type:2 appystem data:CMM: KnJCDE(1678) no sig from 0x33
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:21 2010  severity:0 type:2 appystem data:VMSCRv=160024,w=0,i=256
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:21 2010  severity:0 type:2 appystem data:JVM Error 517
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:21 2010  severity:0 type:2 appystem data:Filesystem corrupt
    guid:0x97C9F5F641D25E5F time: Fri Dec 31 21:09:55 2010  severity:0 type:2 appystem data:VM: 0 gc=0 idle=0 native=NONE

    Hi! I am having the same issue. Were you able to find a solution? Any advice would be greatly appreciated 

  • 80073712 Error Message can't load Apple Application Support Windows 7

    I cannot get iTunes to load.  Apple Application Support error message 80073712.  I have tried all Apple website solutions and they don't work.

    I would like an aswer to this too if anyone knows it.

  • Run-time Error 10459 - Can't Load NIDAQ DLL

    Hi,
    I'm using VB6 and Measurement Studio 6 with NIDAQ 7.4 and a PCI-6013 device.
    I've written an application which accesses the daq card, but also will open another seperate VB6 application which needs to access the daq card.  Before the first application accesses the daq card, it resets the daq card using the cwdaqtools control with the following command:  CWDAQTools1.ResetDAQDevice (1). 
    I then unload the form which referenced the daq card, and then open the second application.  When the second application opens, I get the attached error message: #10459 was generated by cwdaq.  The NI-DAQ DLL could not be called due to an interface error.
    This doesn't happen when I run the first application from VB6 in debug mode.  It also doesn't happen if I run the compiled applications with VB6 just open. 
    Can anyone shed some light or offer any suggestions as to what is going on here, and how to solve the issue.
    Additionally, due to the fact that I'm using Measurement Studio 6 I need to be using the traditional daq drivers.  NiDAQ 7.5 doesn't have the traditional daq driver, so I'm forced to use NiDAQ 7.4.
    Thanks for any help.
    Regards,
    Max

    Hi Marni,
    I've visited the link as suggested.  Here are the results based on the suggested solutions in order:
    1.) I'm fixed in the order in which the applications can be opened, as one application is used to open the second.
    2.) I'm working with the latest version of NI-DAQ (7.5 doesn't work with Measurement Studio 6)
    3.) Target system is using the latest version of NI-DAQ.
    4.) Downloaded palBase and this worked.  However, since this application is designed as a distributable application, it doesn't seem plausible to ask the end user to work with palBase, especially if the end user is not comfortable working with computers.  Is there another way to accomplish the same effect programatically which would be invisible to the end user?
    Regards,
    Max

  • Error message, can't load message(s)

    Since I loaded Thunderbird onto a new Windows 8 laptop I occasionally get this message. The fixes I've found on the internet say to compact folders (didn't work) and to go to the email site--gmail in this case--and delete the message there that is causing a problem. It's usually a message from a yahoo group (embroidery related) but not always. When I delete the message there then thunderbird works properly again. I've used Thunderbird for years and never had this problem--with the same email addresses and the same yahoo groups. What causes this?

    I tried that and it didn't make a difference. The only way I've been able to fix it is to go directly to gmail and delete an email there (today it was from Travelocity) and then it works again.

Maybe you are looking for

  • A few questions from someone new to Aperture (and DSLR photography)

    Hi - I have just got my first DSLR camera (A Nikon D3000) and am trying out Aperture 3. I had a few questions which aren't all just necessarily Aperture related: I have imported my library from iPhoto, however now all my albums are in alphabetical or

  • How can I turn off the logging in procedure?

    A few days ago an Apple associate at the Apple store in Oak Brook, IL, added a new user to try to fix a problem I was having.  Since then, even though I removed that second user, I have to log in.  I am the only user so this is entirely unnecessary a

  • Thirdparty subcontracting in cin

    hiiiiiiiiiiiii sap guru's                              can any budy give me ""THIRD PARTY SUBCONTRACTING cin configuration in IMG & senario regard's sandeep

  • Version management in MDM?

    Does MDM 7.1 have version management capability? I would like to keep separate versions of schemas in development repository. is that possible in 7.1?

  • Bonjour, without WLC, pointers?

    If I can ask for some pointers or ideas on this: Currently have a mix of 3502e and 3602e APs.  They are configured in auton. mode, so no WLC.  The same config across them has a native vlan of 1, vlans 10, 20, and 60.  These all are running off a stac