Jvm error message, what does it mean???

i posted this is the language group also, but i thought there might be people who look at the advanced group that don't look at the language group. anyway, here is what i posted.
i am running in -verbose mode and am getting a signaling error. does anyone know what this is or what it means? here is the exact message:
[Signaling Error: error already pending]
thanks,
erik

I am also seeing this error message when I run in Verbose mode. The reason I turned on verbose mode was to locate a tremendous memory leak. I see a few messages on the same subject but I do not see any answers. Has anyone found the solution to this?

Similar Messages

503105002 error message what does it mean

503105002 error message what does it mean

Hi
The error 503 appears when the site is currently unable to handle the HTTP request due to maintenance of the Business catalyst server.
Could you please try publishing the site now and check if that is working fine now ?

TS1424 error message, what does this mean? MZCommerce.CreditBalanceMismatch.Mobile_message

MZCommerce.CreditBalanceMismatch.Mobile_message
What does this mean? Will not let me purchase music.

anche io devo aggiornare il mio tom tom su I Phone ma mi dà il messaggio MZCommerce.purchasablesAssetTooBigForDownload_message
Non so proprio come aggiornare allora le mie mappe....
Bella storia questa!!!!
Se qualcuno mi sa rispondere gliene sarei grata visto che con Apple Store non riesco
Grazie

I have a new hp 2050 printer and received a 10.0000 supply memory error message. what does this mean

I have a new hp 2050 printer and received a 10.0000 supply memory error message. Can anyone tell me what this means and how to fix it?

mickeymackey, this error looks similar to a related error code that I found for laserjets. Here is a summation of that error code:
http://goo.gl/W7dP6
This describes the problem as being a cartridge error, in which case I would follow the instructions in this document and see if that resolves the issue:
http://goo.gl/h6hWz
that does not resolve the issue, then I would recommend performing a hard reset of the printer. This would involve unplugging the printer for thirty seconds from both the back of the unit as well as from the outlet it is plugged into and then plugging the machine back in and powering it on.
A few additional questions are: Is this printer plugged into a surge protector, wall outlet or battery backup? The ink you are using, are they original HP cartriges or have they been refilled before?
Let me know!

Xcode clang exit code of 254 error message; what does it mean?

I have tried to develop an iOS app on Xcode 4.3 and it has failed and quite with the message: clang exit code of 254.
This has happened twice with the exact same error message. When it happened the first time, I closed my project, then quit Xcode and opened it again. I thought that I needed to flush my settings and should start over again to make sure that the error did not happen again. But it did.
Can you tell me what this error message means and tell me what I need to do to keep it from happening again?
Thank you.

this happened to me alsi and it turned out to be the slightest error in my code. I simply went through my methods in the class where the crash was occuring and found a couple of simple mistakes that 4.2 was not bothered with and fixing the second one fixed it.

Iostat -E error messages, what does this mean?

Good Day,
st3 Soft Errors: 199 Hard Errors: 11 Transport Errors: 3 Vendor: SUN Product: DLT4700 Revision: CC2E Serial No: Q.
Because there is hard errors, does this mean something wrong with the tape drive?
By the way, which instance/driver in "prtconf" show me the scsi controller information ?
sbus, instance #0 (driver name: sbus)
SUNW,CS4231 (driver name: audiocs)
auxio
flashprom
SUNW,fdtwo (driver name: fd)
eeprom (driver name: eeprom)
zs, instance #0 (driver name: zs)
zs, instance #1 (driver name: zs)
sc
SUNW,pll
espdma, instance #0 (driver name: dma)
esp, instance #0 (driver name: esp)
sd (driver name: sd)
st (driver name: st)
sd, instance #0 (driver name: sd)
sd, instance #1 (driver name: sd)
sd, instance #2 (driver name: sd)
sd, instance #3 (driver name: sd)
sd, instance #4 (driver name: sd)
sd, instance #5 (driver name: sd)
sd, instance #6 (driver name: sd)
st, instance #0 (driver name: st)
st, instance #1 (driver name: st)
st, instance #2 (driver name: st)
st, instance #3 (driver name: st)
st, instance #4 (driver name: st)
st, instance #5 (driver name: st)
st, instance #6 (driver name: st)
lus, instance #0 (driver name: lus)
ledma (driver name: ledma)
le (driver name: le)
SUNW,bpp (driver name: bpp)
SUNW,hme, instance #0 (driver name: hme)
SUNW,hme, instance #1 (driver name: hme)
SUNW,fas, instance #0 (driver name: fas)
sd (driver name: sd)
st (driver name: st)
sd, instance #7 (driver name: sd)
sd, instance #8 (driver name: sd)
sd, instance #9 (driver name: sd)
sd, instance #10 (driver name: sd)
sd, instance #11 (driver name: sd)
sd, instance #12 (driver name: sd)
sd, instance #13 (driver name: sd)
sd, instance #14 (driver name: sd)
sd, instance #15 (driver name: sd)
sd, instance #16 (driver name: sd)
sd, instance #17 (driver name: sd)
sd, instance #18 (driver name: sd)
sd, instance #19 (driver name: sd)
sd, instance #20 (driver name: sd)
sd, instance #21 (driver name: sd)
st, instance #7 (driver name: st)
st, instance #8 (driver name: st)
st, instance #9 (driver name: st)
st, instance #10 (driver name: st)
st, instance #11 (driver name: st)
st, instance #12 (driver name: st)
st, instance #13 (driver name: st)
lus, instance #1 (driver name: lus)
SUNW,UltraSPARC
pseudo, instance #0 (driver name: pseudo)
thanks.

I just got a new Mac and wanted to transfer my old iTunes library to it. After a night of attempting to import the old library to the new Mac it said that the library was damaged and subsequent restarts yielded the 13010 error. I deleted everything listed, did a number of iTunes reintalls and the only thing that has allowed iTunes to continue is to dig up a backup library (which is in progress now). Barring this working, how can I get it so that iTunes boots again as if it is factory fresh?

Error message what does it mean?

I have attempted to open Safari on my windows vista based system. However, whe I open it now I get two error messages the first says...
"The procedure entry point CFPropertyListCreateWithData could not be located in the dynamic link library CoreFoundation.dll."
When I click out of this I get the message;
"Your copy of Safari is missing important software resources. Please reinstall Safari."
I have repeatedly reinstalled Safari but still get the same error messages.
Can anyone help me resolve this issue.
Thanks in advanced.

Dear b noir, thanks for your response. After constantly uninstalling and reinstalling I was driving myself crazy with trying to resolve this issue. I followed one pice of advice and then another but to no avail. I had to uninstall all aspects of iTunes and Quicktime and all asoociated programmes and files.
What finally resolved this matter was following the guidelines given in this link and I'm pleased to say success. I share this with people who may encounter a similar problem. I am in no way computer lietrate but not a novice and I found these instructions time consuming but oh so worthwhile.
http://support.apple.com/kb/ht1923

Error Message - What does this mean

Hi all
I was burning more than one copy of a DVD using DVD SP when I received an error message communicating a failure write to DVD.
Initially I assumed it was a DVD media error [faulty disk] however when I changed to the second internal DVD burner using the same blank DVD media the error message did not come up again. In addition I had also tried a second blank DVD disk in the first internal DVD burner and it also failed... It may be a bad batch of blank DVD disks however I have never encountered two in a row, let alone the rarity for me of finding one +in a row+. Could it be the burner?
Here is the error:
The recording device reported the media error: Unknown device error.
...and a second error message came up after collapsing the first error message window stating that:
Formatting failed
The recording device reported the media error: Unknown device error. (0x73, 0x03.)
Your thoughts and participation is greatly appreciated?
Regs

As you mentioned it could be a bad disc or a bad batch of discs. Your machine is new, so even though it could be the drive I would look at the discs first. (Dirty drives or drives going bad can act real weird, being able to burn the DVD but not actually read it back and other things.)
But first check out this thread about discs and how the can behave which came up in the last day or so. Even though it is a DL there, the same thing can happen with SL. (Even discs sitting in a spindle for awhile can start going bad.) I have never had an issue with the Taiyo Yuden I mention in this thread
http://discussions.apple.com/thread.jspa?threadID=1386393&tstart=0

ISDN Gateway error message- What does it mean and what could be causing it?

Hi Folks,
I have a customer that is getting the following errors in the logs of his Cisco/ Codian ISDN Gateway: Any ideas of what they mean and what could be causing them?
I know Q931 is affiliated with Call Setup but not sure why an error would occur. Any help that can be provided is much appreciated, thanks.
Warning
parse_q931_header: invalid protocol discrimator
207
09:45:50.968
ISDN
Warning
parse_q931_header: invalid protocol discrimator
208
09:45:50.975
ISDN
Warning
parse_q931_header: invalid protocol discrimator
209
09:45:51.120
ISDN
Warning
parse_q931_header: invalid protocol discrimator
210
09:45:51.128
ISDN
Warning
parse_q931_header: invalid protocol discrimator

I think I narrowed this down to having a network volume mounted with a share name of "Users". The strange thing is even you if unmount the volume you will still have problems. However, if you avoid mounting the volume entirely (from boot) it will be OK.
The solution, it appears, is to rename the sharepoint to something other than "Users". This worked for us. I'm not sure if it matters whether the server is Windows or Mac OS. In our case the sharepoint was an AFP volume on Mac OS.
We had other errors related to Bridge such as "unable to create folder" and the path in the message appeared to be /Users/currentUser/..... which made no sense at all. However, if Bridge was internally trying to use /Volumes/Users (the mounted sharepoint), it would not only not find "currentUser", but it would not have permissions to create that folder either.
So, another possible solution could be to grant file creation rights on the network volume "Users". Another not-so-great idea.
Hope that helps someone else!

Satellite Pro 6000: LED error message - What does it mean?

Hi,
I gad an old Toshiba Satellite Pro 6000. Sometimes, not after a periode, it turns off. I gad the Error code 'cause the DC IN LED blinks orange. The blinking rate is 1x long 3x short 1x long 2x short 1x long = 10001001 in bin = 91h (is this right?)
Now 91h ist the following error: 1R5-E1V voltage is not more than 1.275V when the computer is powered on. But what the hell this error means? What is 1R5-E1V?
Need help. Greetz

Hi
You have to read the code backwards!
10001001 = 1001 0001 = 91H
http://www.prepressure.com/library/binhex.htm
In my opinion there is something wrong with the electronic on the board.
Therefore you have to contact the Toshiba ASP for the help.

AWT error message, what does it mean?

Hello,
I have a java program that uses AWT, and when i try to run it, i get the error:
java.lang.NoClassDefFoundError: java.awt.Frame
anybody know what this means? thanks
james

The only other thing I can think of is that you imported the Frame class. Also, you could verify that the import statment spelling and syntax is correct.

Itunes error message-what does this mean????

My eMac stopped working so I had to do an archive and reinstall. I did all the software updates and tried to play my purchased music in itunes. It said I had to authorize my computer and enter my password. I did and it gave me this error- "Could not complete your itunes store request. A required itunes component is not installed. (-42404). I checked and I have the latest version of itunes. I even tried to re-create my itunes library and that didn't help.
Does anyone have any suggestions? Or am I out of luck?

Remove iTunes and reinstall iTunes.
Removing iTunes for Mac OS X
http://support.apple.com/kb/HT1224

Never gotten this error message, what does it mean?

When trying to access this link:
http://einestages.spiegel.de/hund-images/original/2008/02/24/3/49cb6707b145cf399 ce7b386793af06e_orig.jpg
I got this error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: http://einestages.spiegel.de/hund-images/original/2008/02/24/3/49cb6707b145cf399 ce7b386793af06e_orig.jpg
The following error was encountered:
Access Denied.
Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
Your cache administrator is [email protected]
Generated Fri, 07 Nov 2008 01:59:05 GMT by hprx04.spiegel.easynet.de (squid/2.6.STABLE18)
I've never seen this error before. I have a user account and was logged into the site. Any ideas?
Thanks!

Hi Jason
It seems you happened across a blocked or restricted area of the site. Although not a user I get the same message. Contacting the site administrator may offer a more comprehensive answer.

DiskWarrior Error Message - What does this Mean??

Maybe this has been touched on, but I can't find it. I get this message when I try to repair permissions with DiskWarrior 4.1 on Mac Pro with 10.5.5. It's always worked before, but now?? I can rebuild directory OK, I can check all files and folders, etc. with DW. I can also Repair Permissions OK with Disk Utility, and repair disk with DU. Everything but permissions. I've booted from a Clone and ran DW from that to my target HD. I even zapped the PRAM. Any ideas??
http://i35.tinypic.com/2us8ysl.png

yvonnejim wrote:
Maybe this has been touched on, but I can't find it. I get this message when I try to repair permissions with DiskWarrior 4.1 on Mac Pro with 10.5.5. It's always worked before, but now?? I can rebuild directory OK, I can check all files and folders, etc. with DW. I can also Repair Permissions OK with Disk Utility, and repair disk with DU. Everything but permissions. I've booted from a Clone and ran DW from that to my target HD. I even zapped the PRAM. Any ideas??
http://i35.tinypic.com/2us8ysl.png
I got that error just once, when running permissions from the computer, before the CD arrived. The second time I ran it I got no error. I think I had some programs open/running at the time.
You might ask alsoft about it, unless others here have a fix or have seen the same error.

Error message, what does this mean: Itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

I'm trying to connect my iPAD to my desktop but I receive an error: itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

have you done a update for your itunes this can be the problem that it will not connect to you ipad so update you itunes and then try it again

Jvm error message, what does it mean???

Similar Messages

Maybe you are looking for